Ozito ARD-PRO Handleiding

Ozito Niet gecategoriseerd ARD-PRO

Lees hieronder de 📖 handleiding in het Nederlandse voor Ozito ARD-PRO (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 225 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/2
DESCRIPTION OF SYMBOLS SPARE PARTS
AIR
RATCHET
3/8” Drive
INSTRUCTION MANUAL
SPECIFICATIONS
ARD-PRO
Max Air Pressure: 90psi (6Bar)
Average Air Consumption: 141.5l/min (5cfm)
Max Torque: 61Nm
No Load Speed: 150/min
Clutch Type: 3Gear Planetary
Air Inlet: 1/4” BSP
Weight: 1.17kg
Spare parts can be ordered from the Special Orders
Desk at your local Bunnings Warehouse.
For further information, or any parts not listed here, visit
www.ozito.com.au or contact Ozito Customer Service:
Australia 1800 069 486
New Zealand 0508 069 486
Email: enquiries@ozito.com.au
Warning Read instruction
manual
Wear eye protection
No load speed
Wear ear protection
Revolutions or
reciprocaton per minute
/min no
GENERAL AIR TOOL SAFETY WARNINGS
AIR RATCHET SAFETY WARNINGS
WARNING! Use only sockets and adapters which are in good condition and are
intended for use with air tools.
• Ensure the air valve (or trigger) is in the “off” position before connecting to the air supply.
• Do not use any additional force upon the tool.
WARNING! Read all safety warnings and all instructions. Failure to follow the
warnings and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference. The term “power tool” in the warnings
refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.
1. Work area safety
a. Cluttered or dark areas invite accidents. Keep work area clean and well lit.
b. Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools create sparks which may ignite the dust
or fumes.
c. Distractions can Keep children and bystanders away while operating a power tool.
cause you to lose control.
d. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing
and gloves away from moving parts. Loose clothes, jewellery or long hair can be
caught in moving parts.
e. Check the maximum pressure rating of any tools or accessories that you intend using with
the compressor. The output pressure of the air from the compressor must be regulated so
that it never exceeds the rated pressure of the tool or accessory.
f. Always wear safety goggles or glasses when using the air compressor. Never point the
nozzle of an accessory towards any part of your body or towards another person.
g. Drain the moisture from the tank daily. It will help prevent corrosion.
h. Use safety equipment including safety goggles or shield, ear protection, breathing respirator
mask and protective clothing.
i. Air tools should not be used in a potentially explosive environment.
j. Use safety equipment including safety goggles or shield, ear protection, breathing or
respirator mask and protective clothing.
k. Any use other than those mentioned The tool must be used only for its prescribed purpose.
in this Manual will be considered a case of misuse. The user and not the manufacturer
shall be liable for any damage or injury resulting from such cases of misuse.
WARNING! In the event that an air line is cut or broken, the air supply must be turned off
at the compressor. A broken air line which is not supported is extremely dangerous and
can whip around very quickly, both with the capability of striking people, and blowing foreign
particles into the air.
Do not attempt to catch the air line but immediately keep bystanders well clear and turn off the air
supply to the hose, turn off the compressor at the On / Off button, and then remove the hose from
the compressor.
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given the supervision or instruction concerning use of the appliance by a person
responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
1 Socket Retainer
2 Forward/ Reverse Lever
3 On/off Trigger
4 Air Inlet
KNOW YOUR PRODUCT
SETUP & PREPARATION
OPERATION
TROUBLESHOOTINGMAINTENANCE
If the air ratchet fails to work effecvely, perform the following
checks:
• Check the forward/ reverse lever is set to the correct direcon.
• Check that the pressure on the air compressor is within its
||working range. If not, let the compressor rest to re-pressurise /
refer to the compressor instruction manual.
•|Check to see if the ratchet has become jammed. Air leaks and the
absence of the ratchet sound are indications the air ratchet is
jammed. To correct, lightly tap the head of the ratchet on the
ground or working surface. Alternatively, toggle the forward/
reverse lever.
Note: Disconnect the tool from the air supply before aaching or removing accessories.
Note: This tool is rated at 90psi. Ensure your compressor is set no higher than 90psi.
Note: The air ratchet should only be
used with impact sockets. Standard
sockets may shaer and break.
F R
3. Screw the male nio fing
clockwise into the female end of
the ratchet.
4. Pull back the sleeve on hose
fing, insert male ratchet end &
release sleeve on hose fing.
5. Place the 4 sided open end of a
1/2” drive socket onto the ratchet.
1. Remove black plasc cap from
air inlet.
2. Wrap the threaded male end with
teflon tape in a clockwise direcon.
2. Select the direcon of rotaon
by turning the forward/reverse lever
an-clockwise for forward or
clockwise reverse rotaon.
1. To turn the air ratchet on, squeeze
the on/off trigger. Release to turn off.
3. Aer each use, place one drop
of oil into the ratchet, through the
air inlet.
• Keep the ventilation vents of the ratchet clean at all times, if
possible, prevent foreign matter from entering the vents.
• If the enclosure of the ratchet requires cleaning, do not use
solvents but a moist soft cloth only. Never let any liquid get inside
the ratchet ; never immerse any part of the ratchet into a liquid.
• Oil the ratchet after each use.

Product specificaties

Merk: Ozito
Categorie: Niet gecategoriseerd
Model: ARD-PRO

Heb je hulp nodig?

Als je hulp nodig hebt met Ozito ARD-PRO stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Ozito

Ozito

Ozito PXLEK-1840 Handleiding

2 November 2024
Ozito

Ozito PXPPS-1820 Handleiding

8 April 2024
Ozito

Ozito PXNGS-218 Handleiding

8 April 2024
Ozito

Ozito PXHTBK-2518 Handleiding

8 April 2024
Ozito

Ozito PSR-5732U Handleiding

16 Maart 2024
Ozito

Ozito PXCLMLTC-418U Handleiding

16 Maart 2024
Ozito

Ozito PXWBS-200U Handleiding

16 Maart 2024
Ozito

Ozito PXDDK-301U Handleiding

16 Maart 2024
Ozito

Ozito PXCPPS-018U Handleiding

16 Maart 2024
Ozito

Ozito WPHGK-2000U Handleiding

16 Maart 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Taga Harmony

Taga Harmony TOS-600 v.2 Handleiding

26 November 2024
Trace Elliot

Trace Elliot Pro 2x12 Cabinet Handleiding

26 November 2024
Kramer

Kramer K-Bar Camera Bracket Handleiding

26 November 2024
Kramer

Kramer RK-19 Handleiding

26 November 2024
Kramer

Kramer OSP-MM1 Handleiding

26 November 2024
Kramer

Kramer ASPEN-1616UX Handleiding

26 November 2024
Korg

Korg Pitchstrap Handleiding

26 November 2024
NeoMounts

NeoMounts WL70-450BL11 Handleiding

26 November 2024
Kramer

Kramer CLS-AOCH/60 Handleiding

26 November 2024
Klauke

Klauke EKM 6022ISM Handleiding

26 November 2024