Ozito ACG-PRO Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Ozito ACG-PRO (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 237 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
DESCRIPTION OF SYMBOLS SPARE PARTS
AIR CAULKING
GUN
310ml
INSTRUCTION MANUAL
SPECIFICATIONS
ACG-PRO
Cartridge Capacity: 310ml
Max. Cartridge Size: Ø 50 mm x 215 mm
Max. Air Pressure: 43psi (3Bar)
Average Air Consumption: 171 l/min (6cfm)
Air Inlet: 1/4” BSP
Weight: 1.1kg
Spare parts can be ordered from the Special Orders
Desk at your local Bunnings Warehouse.
For further information, or any parts not listed here, visit
www.ozito.com.au or contact Ozito Customer Service:
Australia 1800 069 486
New Zealand 0508 069 486
Email: enquiries@ozito.com.au
WARNING!
Using an Extension Hose
Always use an approved extension hose suitable for the air input of this tool. Before use,
inspect the hose for signs of damage, wear and ageing. Replace the extension hose if
damaged or defective.
When using an hose on a reel, always unwind the lead completely.
It is recommended that the hose is a maximum of 25m in length.
NEVER under any circumstances aim the nozzle at another person or animal.
• In the event of an injury occurring, seek medical advice immediately.
Always ensure there is adequate ventilation when caulking.
• The use of ear protection is recommended.
GENERAL AIR TOOL SAFETY WARNINGS
AIR CAULKING GUN SAFETY WARNINGS
WARNING! Read all safety warnings and all instructions. Failure to follow the
warnings and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference. The term “power tool” in the warnings
refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.
1. Work area safety
a. Cluttered or dark areas invite accidents. Keep work area clean and well lit.
b. Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools create sparks which may ignite the dust
or fumes.
c. Distractions can Keep children and bystanders away while operating a power tool.
cause you to lose control.
d. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing
and gloves away from moving parts. Loose clothes, jewellery or long hair can be
caught in moving parts.
e. Check the maximum pressure rating of any tools or accessories that you intend using with
the compressor. The output pressure of the air from the compressor must be regulated so
that it never exceeds the rated pressure of the tool or accessory.
f. Always wear safety goggles or glasses when using the air compressor. Never point the
nozzle of an accessory towards any part of your body or towards another person.
g. Drain the moisture from the tank daily. It will help prevent corrosion.
h. Use safety equipment including safety goggles or shield, ear protection, breathing respirator
mask and protective clothing.
i. Air tools should not be used in a potentially explosive environment.
j. Use safety equipment including safety goggles or shield, ear protection, breathing or
respirator mask and protective clothing.
k. Any use other than those mentioned The tool must be used only for its prescribed purpose.
in this Manual will be considered a case of misuse. The user and not the manufacturer
shall be liable for any damage or injury resulting from such cases of misuse.
WARNING! In the event that an air line is cut or broken, the air supply must be turned off
at the compressor. A broken air line which is not supported is extremely dangerous and
can whip around very quickly, both with the capability of striking people, and blowing foreign
particles into the air.
Do not attempt to catch the air line but immediately keep bystanders well clear and turn off the air
supply to the hose, turn off the compressor at the On / Off button, and then remove the hose from
the compressor.
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given the supervision or instruction concerning use of the appliance by a person
responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
Warning Read instruction
manual
Wear eye protection
Cubic feet per minute
Wear ear protection
Millilitres per minute
ml/min cfm
• Eye protection is recommended to keep hazardous vapours and liquids out of eyes.
Always keep the caulking nozzle in place during use. Never allow the spray to come in direct
contact with the skin.
• Never immerse the caulking gun in liquid.
NEVER allow children to operate or play with the air caulking gun.
• Before cleaning, always disconnect the appliance from the air supply.
Always disconnect from air supply when refilling the cartridge container.
After every use ensure you clean your air caulking gun thoroughly.
NEVER use the air caulking gun outside when it is raining.
1 Release Valve
2 Air Inlet
3 On/Off Trigger
4 Caulk Cartridge Container
KNOW YOUR PRODUCT
21 3 4
TROUBLESHOOTINGMAINTENANCE
If the air caulking gun fails to work effecvely, perform the
following checks:
• Check the air inlet is free of any dirt or blockages.
• Ensure the gun is lubricated properly.
• Check that the pressure on the air compressor is within its
||working range. If not, let the compressor rest to
||re-pressurise / refer to the compressor instruction manual.
Note: This tool has a rated pressure of 43psi (3Bar). Ensure your compressor is set no higher than 43psi (3Bar).
• If the enclosure of the gun requires cleaning, do not use
solvents but a moist soft cloth only. Never let any liquid get inside
the gun; never immerse any part of the gun into a liquid.
• Store the tool in a dry and safe place out of reach of children.
Oil the air caulking gun after each use.
CONNECTING TO COMPRESSOR
OPERATION
LOADING THE CAULKING GUN
3. Screw the male nio fing
clockwise into the female end
of the air inlet.
4. Pull back the sleeve on hose
fing, insert male end & release
sleeve on hose fing.
1. Remove black plasc cap
from the air inlet.
2. Wrap the threaded male
end of an air fing with
thread seal tape in a clockwise
direcon.
2. Press the on/off trigger to start
and smoothly move the nozzle
across the gap.
1. Hold the nozzle up against the gap
you wish to seal.
2. Insert the caulking cartridge and
screw the nozzle onto the cartridge.
1. Unscrew the front cap
3. To stop caulking release the
on/off trigger and press the release
valve.
Note: Disconnect the tool from the air supply before fing or removing aachments.
3. Screw the front cap onto the gun
and cut the end off the nozzle at
the desired caulking diameter.


Product specificaties

Merk: Ozito
Categorie: Niet gecategoriseerd
Model: ACG-PRO

Heb je hulp nodig?

Als je hulp nodig hebt met Ozito ACG-PRO stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Ozito

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd