Optoma EVBMN-M110 Handleiding

Optoma Projector accessoire EVBMN-M110

Lees hieronder de 📖 handleiding in het Nederlandse voor Optoma EVBMN-M110 (1 pagina's) in de categorie Projector accessoire. Deze handleiding was nuttig voor 32 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/1

User's Manual

HDMI Extender over CAT5

with IR, Ethernet & Serial Extending

RoHS

PP5-HEM152Z-000

Package Contents

● Transmitter Unit x 1

● Receiver Unit x 1

● Power Adapter Set x 1

Power Adapter with necessary AC Cord

Plug-in Power Adapter

● User’s Manual x 1

● Foot Pad Set x 2

● IR External Sensor Kit x 1

● CAT5 Cable x 1

● Grounding Wire x 2

Optional:

● IR External Sensor Kit

● HDMI Cable

● Serial Cable

Connection Pattern

Operation

The LEDs on the Extender Units show the real-time status indicating the

linking and communication between the Transmitter Unit and Receiver

Unit. Users can identify the present status through the LED indicator on

the top.

The quality of the output signal will depend largely upon the quality of

video source, cable and display device used. Low quality cables degrade

output signal causing elevated noise levels. Please use the proper cable

and make sure the display device is capable of handling the resolution

and refresh rate selected.

NOTE:

1. The system will disable the video output signal when it detects non-

HDCP compliant display(s) on playing the HDCP video source. All the

connected output displays MUST be HDCP compliant, when the video

source is HDCP compliant.

2. If there’s no signal detected from HDMI port, the baud rate will

automatically speed down to 9,600 bps.

Specications

Users can connect the video source to the Transmitter Unit, connect

the monitor to the Receiver Unit. Connect to Ethernet devices to the

Transmitter and the Receiver Units (LAN ports) and use CAT5e/6 cable

(EIA / TIA 568B industry standard compliant) for the connection between

the Transmitter (Link Port) and Receiver Unit (Link Port) . After all device

connections are completed, connect the provided power cord into an

appropriate power source and plug the opposite end into the power

connector* on the Unit to power up.

CAUTION: The CAT5e/6 cables that connect the Transmitter and Receiver

Units carry electrical current and should not be plugged in to other

devices, as they may cause damage. We strongly recommend marking the

CAT5e/6 cables you are using with this product at both locations for easy

identication.

The nal specication is the actual product based.

Features and functions may be added or changed

after the manual was written. Please v isi t our

website to download the latest version of manual

for reference.

◘

Limited Warranty

IN NO EVENT SHALL THE DIRE CT VENDOR'S LIABILITY FOR DIR ECT OR INDIRECT,

SPECIAL, INCIDENTIAL OR CONSEQUENTIA L DAMAGES, LOSS OF PROFIT, LOSS

OF BUSINESS, OR FINANCIAL LOSS WHICH MAY BE CAUSED BY THE USE OF THE

PRODUCT EXCEEDS THE PRICE PAID FOR THE PRODUCT.

The direct vendor makes no warranty or representation, expressed or implied with respect to

the contents or use of this documentation, and especially disclaims its quality, performance,

merchantability, or tness for any particular purpose.

The direct vendor also reserves the right to revise or update the product or documentation

without obligation to notify any user of such revisions or updates. Fo r further information,

please contact your direct vendor.

All the brand names and registered trademarks are the property of their respective owners.

● Prior to installation, ensure to power off all devices that will be

connected to this system.

● Ensure that all devices you will connect are properly grounded.

● Place cables away from uorescent lights, air conditioners, and

machines that are likely to generate electrical noise.

Rextron

Features

● Send HDMI signal to multimedia display over CAT5e/6 cable of up to

100 meters

● Transmit full uncompressed HD video and audio over cable

● 100BaseT Ethernet Pass-Thru; simultaneously distribute HDMI and

Ethernet streaming video from source to display

● Low cost standard CAT5e/6 LAN cable; advanced and inexpensive

all-in-one connectivity technology

● HDCP compliant and Blu-ray ready

● Support Deep Color, HD-3D video and HD Audio formats

● Support resolution up to Full HD 1080p / 2048 x 1152

● Bi-directional LAN & Serial & two-way IR control

● IR extension supported

● Support Phantom Power -- single power supply at either one end of

two units (Tx & Rx)

● Compact size; easy to set up; simple to install

● Ideal for hospitality (hotels, conference rooms), digital signage

(airports, shopping malls), surveillance cameras, whole-home

networking and point-to-point consumer applications

EVBMN-M110 Transmitter Unit Receiver Unit

EVBMN-110L EVBMN-110R

Input → Output HDMI → RJ-45 RJ-45 → HDMI

LED Status LED Dual Color x 1 Dual Color x 1

LAN LED Single Color x 3 Single Color x 3

Video Resolution (max.) Full HD (1080p@60Hz)

Extension Distance 100M

Ethernet Port RJ-45 x 3 RJ-45 x 3

10/100 Mbps

Serial Port DCE, DB9-F DTE, DB9-M

115kbps (max.)

IR Extension 　x 1, IR Transceiver

　x 1, IR Receiver

　x 1, IR Transceiver

　x 1, IR Receiver

Power Supply DC 12V (Phantom Power)

Enclosure Metal

Weight (gram) 410~420

H x W x D (mm) 140 x 85 x 34

*Above video resolution and extension distance are based on a single CAT5e/6

24AWG solid cable without cascade. STP cabling is recommended for environments

with high EMI or RFI. For the best performance results, using stranded cabling or

other thinner cables, and coiling of excess cable lengths should be avoided. Type Function100M 70M

Tx + Rx EVBM-M110 EVBM-M107 CAT5 HDMI Extender Pair

(Splitter) EVBM-1104L EVBM-1074L CAT5 HDMI Splitter (2-in / 4-out)

with Auto-sensing function

(Switch-

Splitter)

EVBM-S1504L EVBM-S1474L CAT5 HDMI Switch-Splitter (4-in / 4-out)

with Auto-sensing function

Related Products (without Ethernet & Serial function)

CAT5 100M

IR Transceiver

Switch Hub

To Serial Terminal

IR Receiver

ADSL

Serial Devices

Installation Product Description

EVBMN-M110

(EVBMN-110L + EVBMN-110R)

Rear Panel

Front Panel

La Ls

Tx / Rx

La LAN LED Yellow: LAN status (Data communication)

Ls Status LED

[Tx] Blue: Link status; Green: Power on;

Flashing Blue+Green: Power-saving mode

[Rx] Blue: Link status; Red: Power on;

Flashing Blue+Red: Power-saving mode

T1 R1 RJ-45

Connector Connect to Ethernet devices

T2 R2 HDMI

Connector

[T2] Connect to an HDMI video source

[R2] Connect to an HDMI disply

T3 R3 RJ-45

Connector Use CAT5e/6 for connection between two units.

T4 R4 Serial Port [T4] (DCE) Connect to a computer

[R4] (DTE) Connect to a serial device

IR1(in)

IR Remote

Jack

Connect to an IR Receiver

IR1(out) Connect to an IR Transceiver

IR2(in) Connect to an IR Receiver

IR2(out) Connect to an IR Transceiver

PPower Supply* Apply power to the unit.

*Phantom Power: Only one power adapter is required to power the entire

system. The power adapter may be connected to either the Transmitter Unit

or the Receiver Unit.

Cabling Requirements

HDMI transmission running along the Ethernet cabling is particularly

susceptible to EMI (electro magnetic interference) or RFI (radio frequency

interference). It can be caused by being in close to fluorescent lighting or

power cabling. The following are some considerations that you should pay

attention to.

1. Place cables away from uorescent lights, air conditioners, and machines

that are likely to generate electrical noise.

2. The shielded cables (FTP, STP) are suggested for they can reduce the

interference, and work better to EMI or RFI than UTP cables.

3. For superior video quality, unbundled cables work better than bundled

ones. Bundled cable of greater than 3 ft. diameter will have minor effect on

the cable length.

4. The solid cable will work better than stranded cable. It may shorten the

transmission distance if you use stranded cabling or other cables thinner

than 24AWG. That is, solid cable of larger than 24AWG is strongly

suggested. Additionally, CAT6 is more recommended.

5. Joined cables can result in signal loss and shortening transmission

distance. Therefore, for the optimal transmission distance, we recommend

using only one piece of cable (without any immediate joints) between

transmitter and receiver units.

Other Notices

1. Due to EMI or RFI, some certain brands/types of displays, like monitors

and TVs, may result fuzzy or snowing on screens. In this case, please try

to restart the displays.

2. As the system transmits massive data, temperature rises on the unit is a

normal phenomenon, so please do not open any components inside by

yourself.

3. The unit is a sealed structure; should not be tampered with by anyone

other than registered installer.

T4P

T2T3

Grounding

IR1(in)

Grounding

R2R3

R4P

IR Transceiver

IR Receiver

IR1(out)

IR2(out)

IR2(in)

Product specificaties

Merk:	Optoma
Categorie:	Projector accessoire
Model:	EVBMN-M110
Kleur van het product:	Zwart
Gewicht:	400 g
Breedte:	140 mm
Diepte:	33 mm
Hoogte:	84 mm
Soort:	AV-zender & ontvanger
Gebruikershandleiding:	Ja
LED-indicatoren:	Ja
Connectiviteitstechnologie:	Bedraad
Ethernet LAN:	Ja
Ondersteunde video-modi:	1080p
Maximum resolutie:	1920 x 1080 Pixels
Meegeleverde kabels:	DC
Garantiekaart:	Ja
Maximale refresh snelheid:	60 Hz
Aansluiting voor netstroomadapter:	Ja
Materiaal:	Metaal
VGA (D-Sub) invoer ports:	1
Aantal per verpakking:	1 stuk(s)
WLAN gegevensoverdrachtsnelheid (eerste band):	100 Mbit/s
Merkcompatibiliteit:	Optoma
HDMI in:	1
RJ-45 uitgang ports:	1
RJ-45 invoer ports:	3
Operating voltage:	12 V
Type product:	USB Wi-Fi-adapter
Ondersteundende kabel types:	Cat5e, Cat6
Draagfrequentie:	38 kHz
RS-232-passthrough:	Ja