Optoma BX-AL133 Handleiding
Optoma
Projector accessoire
BX-AL133
Lees hieronder de š handleiding in het Nederlandse voor Optoma BX-AL133 (19 pagina's) in de categorie Projector accessoire. Deze handleiding was nuttig voor 56 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/19
Userās Manual
BX-AL133 Anamorphic Lens
Userās Manual
BX-AL133
For more information, please visit our website at:
http://www.OptomaUSA.com Userās Manual | 2
Safety
1. Read and understand instructions and heed warnings before beginning installation.
2. Mount rail securely. The lens is heavy, and requires a secure and stable surface.
Fasteners in sheetrock alone are not safe. Reciprocal lens motion can and will work
them loose. Use a board, plate, or projector mount ļ¬xed to ceiling joists or studs.
3. Anticipate unexpected lens motion. A malfunction can cause the lens to move
unexpectedly. Disconnect the power when installing, working on or repositioning
the lens. While on a ladder, do not stand in the direct path of the lens in case of
unexpected or accidental movement.
4. Do not install the lens in a wet or moist environment, or where the mechanism will be
exposed to extreme or external weather conditions. The lens is for indoor use only.
5. Never pour any liquid or push any object into the enclosure.
6. Do not install in direct path of heater vents or projector exhaust ports. Do not block
any of the vents or holes in the enclosure.
7. The power adaptor is intended for 100- 220 volt, 50-60 cycle AC power only.
8. Do not subject power cord to conditions which will wear through or cut the insulation.
Avoid excessive tension or chaļ¬ng of the cord.
9. Do not service the motor drive or electronics. There are no user serviceable parts.
Contact your dealer or send to a factory approved facility. Opening the case will void
the warranty.
10. Exercise extreme caution when working on a ladder. Do not work directly above
another person, particularly a child. Plan all work carefully. Accidentally dropping a
drill, hammer, or the lens assembly can cause serious bodily injury.
11. Pushing or forcing the sled by hand may damage the circuit board. Should it be
necessary to move the sled by hand, make sure it is done slowly and lightly.
12. The Optoma motorized sled will ramp up and down at the beginning and end of the
traversal to minimize swaying forces at the mount. As the motor accelerates and
brakes, there is a minimal change in the sound.
This device complies with part 15 of the FCC rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
September 2005 Edition
Userās Manual
BX-AL133
For more information, please visit our website at:
http://www.OptomaUSA.com Userās Manual | 3
Introduction
Thank you for purchasing the Optoma BX-AL133 anamorphic lens. The lens and
motorized sled is outļ¬tted with a custom mechanism designed exclusively for use in a
home theater environment.
No oil or liquid based lubricants are used to assure the maximum cleanliness of optical
components. Both lens and drive will provide years of maintenance free service. The
Optoma system is built and tested in the USA with the strictest quality standards and
certiļ¬cations.
Features and beneļ¬ts:
ļ” Easy, straight forward installation and operation
ļ” Machined, high-grade, anodized aluminum components
ļ” Repeatable precision positioning system
ļ” Flexible mounting options for either table top or ceiling mount
ļ” Speed selector for high or low speed operation
ļ” Conļ¬gurable ālens inā position
ļ” Extra external IR sensor for remote mounting (if needed)
ļ” Input 12V jack for automatic lens trigger
ļ” Output 12V jack for screen masking trigger
ļ” Non-mechanical long life optical stop sensors
ļ” Dry operating precision linear bearings
ļ” Heavy-duty, high-precision NEMA 23 stepper motor
ļ” Custom built, low noise stepper drive circuitry and ļ¬rmware
ļ” Endurance tested to more than 250,000 traversals
ļ” 8-button long-range (up to 50 feet) remote control with discrete functions
ļ” Backlit logo with on/off lighting control
ļ” Reversible logo plates
ļ” Built and tested in the USA
ļ” FCC, CE and UL certiļ¬ed
Product specificaties
| Merk: | Optoma |
| Categorie: | Projector accessoire |
| Model: | BX-AL133 |
Heb je hulp nodig?
Als je hulp nodig hebt met Optoma BX-AL133 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Projector accessoire Optoma
16 Juni 2023
7 April 2023
17 Februari 2023
15 Februari 2023
14 Februari 2023
6 Februari 2023
31 Januari 2023
Handleiding Projector accessoire
- Projector accessoire Sony
- Projector accessoire Casio
- Projector accessoire Panasonic
- Projector accessoire Auna
- Projector accessoire Barco
- Projector accessoire BenQ
- Projector accessoire Hitachi
- Projector accessoire InFocus
- Projector accessoire Manhattan
- Projector accessoire Nec
- Projector accessoire Nedis
- Projector accessoire Newstar
- Projector accessoire Peerless
- Projector accessoire Sanyo
- Projector accessoire Speaka
- Projector accessoire Viewsonic
- Projector accessoire Vogels
- Projector accessoire XGIMI
- Projector accessoire Omnitronic
- Projector accessoire Sanus
- Projector accessoire Vision
- Projector accessoire Chief
- Projector accessoire Gabor
- Projector accessoire Lindy
- Projector accessoire Da-Lite
- Projector accessoire AV:link
- Projector accessoire Peerless-AV
- Projector accessoire Projecta
- Projector accessoire Chipolino
- Projector accessoire Konig & Meyer
- Projector accessoire Roadinger
- Projector accessoire Tempest
- Projector accessoire Premier Mounts
- Projector accessoire Gravity
- Projector accessoire Elite Screens
- Projector accessoire Kingpin Screens
- Projector accessoire Kanto
- Projector accessoire V7
- Projector accessoire Christie
- Projector accessoire Unicol
- Projector accessoire My Wall
- Projector accessoire Smart Media
Nieuwste handleidingen voor Projector accessoire
19 November 2024
19 November 2024
18 November 2024
17 November 2024
17 November 2024
17 November 2024
17 November 2024
17 November 2024
17 November 2024
17 November 2024