Vogels PPA 904 Handleiding

Vogels Projector accessoire PPA 904

Lees hieronder de 📖 handleiding in het Nederlandse voor Vogels PPA 904 (2 pagina's) in de categorie Projector accessoire. Deze handleiding was nuttig voor 6 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

CONTROL UNIT FOR COMMAND OR CENTRALIZATION MOTOR

Control unit for one electromechanical motor, centralizaon or integra-

on dry contact command.

The control unit imputs is: local impulsive command (open and close), ge-

neral impulsive command (open and close), general priority command

(open and close) dead man switch.

Prevalence of general command (dead man switch) on other controls.

CONNECTION LAYOUT TECHNCIAL FEATURES

Power supply: 230 Vac ± 10% / 50 Hz

Corr. max output: 5 A cos 1,4 / 2 A cos 0,4φ φ

Work Time: 120 seconds

Tens. output with: 230 Vac / 50 Hz

Dimensions without box: 46x46x37 mm

Terminal secon: ²2,5 mm

INPUTS AND OUTPUTS CONNECTION

1 = 230 Vac Neutral

2 = GND

3 = 230 Vac Phase

4 = COM x cont. neutral

5 = OPEN output

6 = COM x engines.

7 = CLOSE output.

8 9 - = COMMON commands.

10 = OPEN local command.

11 = CLOSE local command.

12 = OPEN general comm.

13 = CLOSE general comm.

14 = OPEN priority gen. comm.

15 = CLOSE priority gen. comm.

CONTROL UNIT CONNECTION

LOCAL COMMAND INPUT: allows the LOCAL com-

mand of the motor or system. The type of command

is IMPULSIVE and the contacts are voltage free. To -

stop the engine give an inverse command respect to

the one in progress (ex: if OPEN = CLOSE). Timed

command. Mulple buons can be connected in

parallel. Recommended cable for connecon: 3x0.25

mm or 3x0.22 mm.

GENERAL COMMAND INPUT: allows the GENERAL com-

mand of the engine or system. The type of command is

IMPULSIVE and the contacts are voltage free. To stop the -

engine give an inverse command respect to the one in

course (ex: if OPEN = CLOSE). Timed command. It’s possi-

ble to connect several buons in parallel with each other.

Cable recommended for connecon: 3x0.25 mm or

3x0.22 mm.

OUTPUT CONNECTION FOR COMMAND MANAGEMENT

OF OTHER UTILITIES TO CLEAN CONTACTS: useful for ma-

naging the control of other users or equipment. the control

contacts are voltage free. Connect the wire of the MUNICI--

PALITY to the terminal 4, the wire OPENS with the terminal

5 and the wire CLOSE with the terminal 7.

Recommended cable for the connecons: 3x0.25 mm /

3x0.22 mm

This product is an integral part of the automaon and must be disposed of together with it. As for the installaon operaons,

even at the end of the life of this product, dismantling operaons must be carried out by qualied personnel. This product

consists of various types of materials: some can be recycled, others must be disposed of. Inquire about the recycling or dispo-

sal systems required by the regulaons in force in your area, for this category of product.

WARNING! Some parts of the product may contain pollung or hazardous substances which, if disper-

sed in the environment, could cause harmful eects on the environment and human health. Local re-

gulaons may provide for heavy penales for the illegal disposal of this product.

As indicated by the symbol on the side, it is forbidden to throw this product in household waste. Then

perform the "separate collecon" for disposal, according to the methods established by the regula-

ons in force in your territory, or return the product to the seller when buying a new equivalent pro-

duct.

WASTE DISPOSAL

TECHNICAL DIRECTIVES

Sases all the technical regulaons applicable to the product Within the Scope of Council Direcves 79/23/EEC:

EN55014 1:2006+A1:2009+A2:2011 EMC—Electromagnec compability:Requirements for household appliances, -

electric tools and similar apparatus. Part 1 Emission

EN55014 2:1997+A1:2001+A2:2008 EMC—Electromagnec compability:Requirements for household appliances, -

electric tools and similar apparatus. Part 1 Immunity– Product family standard.

EN6100 3 2:2006+A2:2009 EN 61000 3 3:2008: EMC—Electromagnec compability: limits for harmonic current emis-- - - -

sions and Limitaons of voltage uctuaons and icker in low voltage equipment.-

EN60335 1:2012+A11:2014 EN 60335 2 103:2005+A1:2008: Safety of householf and similar electrical appliances– Safe-- - -

ty- Part 1: General Rules

Part 2 : Parcular requirements for drives for gates, doors, Windows Motorized, etc.

Direva 2014/30/EU

Direva 2014/35/EU

MOTOR OUTPUT CONNECTION: connect the cable OPEN

of to the motor the 5 , the clamp (motor wire brown)

cable clamp CLOSE to the 7 and (motor wire black) the

COMMON clamp motor cable to the 6 . (motor wire blue)

Motor wire yellow/green will not be connected.

Power charge allowed: MAX 500 W.

Cable the 0,75 mm.recommended for connecon: 3 x

Product specificaties

Merk:	Vogels
Categorie:	Projector accessoire
Model:	PPA 904

Heb je hulp nodig?

Als je hulp nodig hebt met Vogels PPA 904 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Projector accessoire Vogels

Vogels PPA 904 Handleiding

9 Januari 2025

Vogels PUC 2715 Handleiding

26 Mei 2023

Vogels PPC 1075 Handleiding

19 November 2022

Handleiding Projector accessoire

Nieuwste handleidingen voor Projector accessoire

Roadinger MBT-3 Handleiding

6 Januari 2025

NeoMounts BEAMER-W050BLACK Handleiding

18 December 2024

NeoMounts BEAMER-C50 Handleiding

17 December 2024

NeoMounts BEAMER-C200 Handleiding

17 December 2024

SMK-Link VP3600 Handleiding

26 November 2024

NeoMounts CL25-550BL1 Handleiding

26 November 2024

NeoMounts BEAMER-W100SILVER Handleiding

26 November 2024

NeoMounts BEAMER-C80WHITE Handleiding

26 November 2024

NeoMounts CL25-530BL1 Handleiding

26 November 2024

NeoMounts CL25-540BL1 Handleiding

26 November 2024