Olympia AD160 Handleiding

Olympia Zaklamp AD160

Lees hieronder de 📖 handleiding in het Nederlandse voor Olympia AD160 (2 pagina's) in de categorie Zaklamp. Deze handleiding was nuttig voor 25 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

Congratulations on your purchase of the Olympia

AD160 Cree XPG LED high-performance ﬂashlight.

This product is designed to provide you with the

best possible functionality. The AD160 utilizes

Cree® LED technology that is geared for optimum

brightness and efﬁciency. It’s constructed in

aircraft-grade aluminum with premium Type II hard

anodized, anti-abrasive ﬁnish. The lightweight,

compact design makes it a functional light for

multiple uses including hunting, hiking, camping,

caving, general household use, recreational

activities, rugged sports or emergency situations.

Please take a few moments to read this user guide

to ensure that you get the best performance and

years of trouble-free service.

Product Description

Battery Installation

1. Unscrew the tail switch cap and insert 1xAA

Alkaline or rechargeable *batteries. The (+)

terminal on the batteries should face toward

the ﬂashlight’s head.

2. Replace the tail switch cap and be sure to

tighten snugly, but do not over tighten as this

could strip the threads in the cap. Turn on the

ﬂashlight as indicated in any of the options

listed in the table that follows. Note: If the tail

cap is not tightened snugly; the ﬂashlight

will not turn on.

3. When the battery life is nearly depleted, your

ﬂashlight will blink to indicate new batteries are

needed.

*batteries included

Flashlight Operation

Your Olympia AD160 Cree XPG LED high-

performance ﬂashlight has a push-button tail

switch for on/off operation and is equipped with

1) Momentary and 2) Continuous light options.

It also has 5 light modes to suit your varied

needs. See table instructions to access these

functionalities:

Olympia AD160

CREE XPG LED

Flashlight

User Guide

Lighting Operation Modes

Momentary-on

Lighting

Press the push-button tail switch

half-way to activate the light

momentarily.

Continuous

Lighting

Press the tail switch push-button to

completely turn on the ﬂashlight.

The light will stay on until the push-

button is turned off.

Lighting Modes

There are ﬁve types of light output:

High Middle 

Low Strobe SOS

Press the tail push-button to switch

to each mode

Accessing the 5 Lighting Modes

High Beam Press the push-button tail

switch once

Mid Beam Press the push-button tail

switch twice

Low Beam Press the push-button tail

switch 3 times

Strobe Press the push-button tail

switch 4 times

SOS Press the push-button tail

switch 5 times

Memory function

Your Olympia AD160 Cree XPG LED ﬂashlight

automatically memorizes the last light setting/

mode used when the ﬂashlight next is turned

on. i.e., after being in any one of the ﬁve light

settings (High Middle Strobe SOS) for  Low 

3 seconds, the last one used will be memorized.

Maintenance and Precautions

1. Do not disassemble the sealed head. Doing

so can cause damage to the ﬂashlight and will

void the warranty.

2. Use high-quality batteries or you run the risk

of the ﬂashlight being damaged by electrolyte

leakage or battery breakage.

3. If the ﬂashlight will not be used for a long time,

remove the batteries to avoid damage caused

from battery leakage.

4. Lubricate the O-rings regularly using a

Q-tip®. Apply a small dab of silicone grease

or petroleum jelly to the contacts to prevent

corrosion. Doing so will keep the ﬂashlight

properly sealed against water. If the O-rings are

damaged after prolonged use, replace them.

5. Clean the ﬂashlight contacts periodically

especially if the light ﬂickers or does not light

up. There are different reasons for a ﬂickering or

non-working light:

A: The batteries may need to be replaced.

Solution: Replace old/defective batteries with

new ones (be sure to double check correct

installation of + and - terminals).

B: The threads, PCB board contact or other

contacts are dirty.

Solution: Use a Q-tip® to apply a tiny amount

of alcohol to clean the contact points.

If the above methods do not work, please refer to

the warranty policy listed in this user guide.

Warning

The AD160 is a high-intensity lighting device and

capable of causing eye damage. Please avoid

shining the light directly into the eyes.

Limited Product Warranty

Coverage

Giant International Ltd. warrants this product against

defects in materials and workmanship under normal

use for 24 months from the date of purchase.

Giant International Ltd., at its option, will at no

charge repair or replace any ﬂashlight that does not

conform to this warranty. This warranty is valid only

in the United States and Canada and extends to the

ﬁrst purchaser only and is not transferable.

Exclusions

This warranty does NOT cover accessories such

as lanyards and holsters, defects or damage

resulting from misuse, accident or neglect,

improper operation or alteration, normal wear and

tear, cosmetic or surface damage, or accessories

on which serial numbers or date tags have been

altered. DAMAGES OR DEFECTS RESULTING

FROM SERVICE WORK PERFORMED BY

SERVICE CENTERS NOT AUTHORIZED BY GIANT

INTERNATIONAL LTD. ARE NOT COVERED.

Obtaining Service

To obtain warranty service, call 1-866-537-0384

or email us at support@giantintl.com in the USA

and Canada. All ﬂashlights must be shipped to a

Giant International Ltd. Service Center freight and

insurance prepaid by the consumer, and include

dated proof of purchase, description of problem,

and the consumer’s address and telephone number.

General Conditions

REPAIR OR REPLACEMENT AS PROVIDED

UNDER THIS EXPRESS WARRANTY IS THE

EXCLUSIVE REMEDY OF THE CONSUMER.

IMPLIED WARRANTIES, INCLUDING WITHOUT

LIMITATION THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE, ARE GIVEN ONLY IF

SPECIFICALLY REQUIRED BY APPLICABLE LAW.

IN NO EVENT SHALL GIANT INTERNATIONAL

LTD. BE LIABLE FOR DAMAGES IN EXCESS OF

THE PURCHASE PRICE OF THE FLASHLIGHT, OR

FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR

CONSEQUENTIAL DAMAGES ARISING OUT OF

THE USE OR INABILITY TO USE THE PRODUCT,

TO THE FULL EXTENT THESE DAMAGES MAY

BE DISCLAIMED BY LAW. Some states and

jurisdictions do not allow the limitation or exclusion

of incidental or consequential damages, so the

above limitations or exclusions may not apply to

you. This warranty gives you speciﬁc legal rights,

and you may also have other rights that vary from

state to state or from one jurisdiction to another.

Giant International Ltd.

3495 Piedmont Rd. NE

Bldg. Ten, Ste. 920

Atlanta GA 30305

USA

E-mail: support@giantintl.com

www.olympiaproducts.com

Telephone +1 (866) 537-0384

All registered trademarks and trade dress are the property of the

respective owners.

KEM-ML37604-01

Product Specs

Mode High Middle Low Strobe

Light

Output 160

Lumens

9Hz

Runtime 1.5 hrs. 2 hrs. 12 hrs. -

Bulb Cree XP-G LED with a lifespan of

50,000 hrs.

Batteries 1xAA / works with Alkaline or

rechargeable battery

(included)

Flashlight

Dimensions

3.8”L x 0.89”D (95.5 mm x 22.5 mm)

Working Voltage

Range 1-1.5V

Weight w/o

batteries 1.7 ozs (48.7 g)

Beam Distance 107 M

Beam Intensity 2890 CD

Waterproof IPX-8 (up to 2M)

Impact Resistance 1M

Package includes

• 1 Olympia AD160 Cree XPG LED Flashlight

• 1 Lanyard

• 1 Belt clip

• 2 spare O-rings

• 1 spare rubber tail switch cover

• 1 AA Alkaline Battery

• 1 User Guide

Product specificaties

Merk:	Olympia
Categorie:	Zaklamp
Model:	AD160
Kleur van het product:	Zwart
Aantal vermogenniveau's:	5
Gewicht:	48.7 g
Breedte:	95.5 mm
Materiaal behuizing:	Aluminium
Aantal lampen:	1 lampen
Soort lamp:	LED
Vermogen lamp:	- W
Internationale veiligheidscode (IP):	IPX8
Aan/uitschakelaar:	Ja
Waterdicht:	Ja
Aantal:	1
Lichtstroom:	160 lm
Voltage lamp:	1.5 V
Type batterij:	AA
Type zaklamp:	Zaklamp
Lichtbundelafstand (max):	107 m
Diameter hoofd:	22.5 mm