Numark PT01 Touring turntable Handleiding

Numark Mengpaneel PT01 Touring turntable

Lees hieronder de 📖 handleiding in het Nederlandse voor Numark PT01 Touring turntable (28 pagina's) in de categorie Mengpaneel. Deze handleiding was nuttig voor 44 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/28
User Guide
English ( 2 – 6 )
Guía del usuario
Español ( 7 – 11 )
Guide d'utilisation
Français ( 12 – 16 )
Guida per l'uso
Italiano ( 17 – 21 )
Benutzerhandbuch
Deutsch ( 22 – 26 )
Appendix
English ( 27 )
PT01 Touring
2
TOURING
ON
OFF
78
45
33
STOP
AUTO
ON
OFF
78
45
33
STOP
AUTO
TOURING
User Guide (English)
Introduction
Box Contents
Make sure that the items listed below are included in the box:
• PT01 Touring
• Felt Slipmat
• 45 RPM Adapter
• USB Cable
• Software Download Card
• User Guide
• Safety & Warranty Manual
Safety Information
• Not for use in rain or wet locations. Use only in dry locations.
• Play the turntable only on a level surface.
• The turntable cover must be open when playing records.
• Close the turntable cover when not playing records.
Support
For the latest information about this product (system requirements, compatibility information, etc.) and
product registration, visit numark.com.
Connection Diagram
Items not listed under the Box Contents are sold separately.
Use the included USB cable to connect PT01 Touring to (A) a 5V USB power adapter connected to a power
outlet or (B) your computer.
(A) (B)
Charge or
Power
Computer USB Power
Adapter (not
included)
3
Features
1. Platter – Place your record here.
2. 45 RPM Adapter Holder – Holds the
included 45 RPM adapter. When not
using the adapter, please place it in
this holder.
3. Tonearm – The fixed tonearm can be
raised and lowered by hand, or by
pressing the raise / lower lever.
4. Arm Clip – This specially designed arm
clip secures the tonearm while at rest
or when not in use. The arm clip has
been designed to remain in the up
position while unlocked.
5. Raise / Lower Lever – Raises and
lowers the tonearm.
6. 33 / 45 / 78 Switch – This switch
controls the RPM of the turntable platter.
Note: For best results when playing 78 RPM vinyl
records, use a 78 stylus (sold separately). Only use a
78 stylus with 78 RPM vinyl records.
7. Autostop switch – This switch turns autostop on or
off. When autostop is on, the platter will start spinning
when the tonearm is placed over the record and stop
spinning when the record has reached the end. (When
autostop is off, the platter will always spin regardless of
the position of the tonearm.)
Note: If your vinyl record stops before it reaches the
end of the music, turn Autostop to the off position for
this particular record. This is generally recommended
for 45 RPM records.
8. Volume/Power Knob – To power on PT01 Touring,
turn this knob clockwise until it clicks. When powered on, use
this knob to adjust the volume. To turn off PT01 Touring, turn
this knob counterclockwise until it clicks.
9. Headphone Output – Connect headphones here (sold
separately) to listen to your vinyl.
10. Battery Charging Indicator – The LED will illuminate when
charging the battery. The LED will turn off once the battery is
fully charged.
11. Power Indicator – This LED illuminates when the power is on and goes out when the battery power is
depleted.
12. Speaker – The record's audio will be played through this built-in speaker.
13. Aux Input – Connect a CD player, digital media player, or other audio source to this 1/8” stereo
auxiliary input.
14. RCA Output* – The audio from a playing vinyl record is sent to this line-level coaxial audio output. This
must not be connected to phono level devices.
15. USB Port – Use the included USB cable to connect your turntable to your computer. The USB
connection will send audio from the turntable to your computer. Please see the Using PT01 Touring
With Your Computer section of this manual for information. Also, use the included USB cable to
connect PT01 Touring to a USB power adapter connected to a power outlet or your computer.
IMPORTANT: Remove the plastic cartridge
cover (needle cover) before operating the
turntable.
*WARNING: The RCA outputs are LINE
level. Please only connect these to LINE
level inputs. You may damage your receiver
if you plug in a LINE level device into a
PHONO level input.
IMPORTANT: Place the included felt slipmat
on the platter; then place your record on the
felt slipmat to carefully hold your records.
RL
14
15
AUX
USB
OUT
1
12
12
10
11
9
8
5
6
7
4
3
2
13
TOURING

Product specificaties

Merk: Numark
Categorie: Mengpaneel
Model: PT01 Touring turntable

Heb je hulp nodig?

Als je hulp nodig hebt met Numark PT01 Touring turntable stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Mengpaneel Numark

Numark

Numark ICJ01 Handleiding

29 Juni 2023
Numark

Numark C3 USB Handleiding

21 Juni 2023
Numark

Numark TTXUSB turntable Handleiding

18 November 2022
Numark

Numark DM3000X Handleiding

8 Mei 2023
Numark

Numark DJ 2 Go Handleiding

18 November 2022
Numark

Numark NDX900 Controller Handleiding

18 November 2022
Numark

Numark DM1635 Handleiding

18 November 2022
Numark

Numark TTXUSB Handleiding

1 April 2023
Numark

Numark NS7FX Handleiding

21 Maart 2023
Numark

Numark CDMix Bluetooth Handleiding

12 Maart 2023

Handleiding Mengpaneel

Nieuwste handleidingen voor Mengpaneel

NutriBullet

NutriBullet Ultra 1200 Handleiding

16 November 2024
Mackie

Mackie ProFX12 Handleiding

15 November 2024
Solid State Logic

Solid State Logic SSL UF1 Handleiding

15 November 2024
Yamaha

Yamaha IM8-32 Handleiding

14 November 2024
Yamaha

Yamaha IM8-40 Handleiding

14 November 2024
Yamaha

Yamaha DCU5D Handleiding

14 November 2024
Yamaha

Yamaha SP02R96 Handleiding

14 November 2024
Yamaha

Yamaha MG166C-USB Handleiding

13 November 2024
RCF

RCF L-PAD 12C Handleiding

5 November 2024
RCF

RCF L-PAD 10C Handleiding

5 November 2024