Numark CDN450 Handleiding

Numark Mengpaneel CDN450

Lees hieronder de 📖 handleiding in het Nederlandse voor Numark CDN450 (28 pagina's) in de categorie Mengpaneel. Deze handleiding was nuttig voor 110 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/28

RACK-MOUNT DUAL MP3/CD PLAYER



  QUICKSTART GUIDE

ENGLISH ( 1 – 5 )



  GUÍA DE INICIO RÁPIDO

ESPAÑOL ( 6 – 10 )



  GUIDE D’UTILISATION RAPIDE

FRANÇAIS ( 11 – 15 )



  GUIDA RAPIDA

ITALIANO ( 16 – 20 )



  KURZANLEITUNG

DEUTSCH ( 21 – 25 )

BOX CONTENTS

 CDN450 CD player transport unit

 CDN450 CD player control unit

 Power cable

 RCA cables (2 pair)

 2 control cables

 2 fader start cables

 Quickstart Guide

 Safety & Warranty Information Booklet

REGISTRATION

Please go to http://www.numark.com to register your CDN450. Registering your product ensures that we can keep you up-to-

date with any new product developments and provide you with world-class technical support, should you run into any problems.

GROUND RULES

1. Make sure all items listed in the BOX CONTENTS section are included in the box.

2. READ SAFETY & WARRANTY INFORMATION BOOKLET BEFORE USING THE PRODUCT.

3. Study the connection diagram in this guide.

4. Place mixer in an appropriate position for operation.

5. Make sure all devices are turned off and all faders and gain knobs are set to “zero.”

6. Connect all stereo input sources as indicated in the diagram.

7. Connect the stereo outputs to power amplifier(s), tape decks, and/or other audio sources.

8. Plug all devices into AC power.

9. Switch everything on in the following order:

• Audio input sources (i.e. turntables, CD players, etc.)

• Mixer

• Last, any amplifiers or output devices

10. When turning off, always reverse this operation by turning off:

• Amplifiers

• Mixer

• Last, any input devices

CONNECTION DIAGRAM

POWER

AUDIO CABLES

CONTROL

CABLES

FADER START

CABLES

MIXER

CONTROL

UNIT

TRANSPORT

UNIT

HOUSE AMP

FRONT PANEL FEATURES

1. POWER SWITCH – Turn the machine

on and off with this button. The unit

should always be shut down with this

button first before any external power is

removed. Typically it is recommended

that the CD player is powered on before

amplifiers and powered off after

amplifiers.

2. EJECT – Pressing will open or close the

disc tray on the transport.

3. CD DRAWER – Place your CDs you

wish to play in here. This unit is

designed to play commercially available

CDs, MP3 CDs and properly burned and

finalized CD-Rs. Due to variances on

the specification of certain CD burners

and CDs, some homemade CDs may

not play properly. We recommend

burning CDs at the minimum speed

possible for the best performance.

4. JOG WHEEL – The jog wheel serves many functions depending on its current mode.

a) If a track is not playing, the JOG WHEEL will search slowly through a track's frames. To set a new cue point,

rotate the JOG WHEEL then begin playback when you have determined the proper position. Press CUE to return

to that cue point.

b) If a track is playing, the JOG WHEEL will temporarily bend the pitch of the track. Rotating the JOG WHEEL

clockwise temporarily speeds it up while rotating it counterclockwise slows it down. This is a useful tool for beat-

matching (see MATCHING TEMPOS & BEATS).

c) When the SEARCH button has been activated, rotating the JOG WHEEL will scan rapidly through the track.

d) When the SCRATCH button has been activated, rotating the JOG WHEEL will "scratch" over the audio of the

track, like a needle on a record.

5. SCRATCH – Activates or deactivates Scratch Mode. While activated, rotating the JOG WHEEL creates a 'scratch'

effect. The LED indicator will be blue when Scratch Mode is active. (Note: This feature is not optimal for searching

through long audio passages. For longer searches, activate the SEARCH function.)

6. SEARCH – Pressing this button allows you to use the JOG WHEEL to rapidly scan through the music. The LED

indicator will be red when Search Mode is active.

7. CUE – During playback, pressing CUE will return to the most recent point where playback was started and will pause the

track. Holding down CUE will start playback from this point, and releasing CUE will cause it to return to that point and

will pause the track. Also, if the track is paused, you can use the JOG WHEEL to locate a new cue point.

8. PLAY / PAUSE – Plays or pauses the track. (Note: When paused, pressing PLAY will only set a new cue point if the

JOG WHEEL has been moved.)

9. TRACK SELECT – Used to select the track to be played.

10. FOLDER SELECT – Used to navigate folders on an MP3 disc.

11. FOLDER / +10 – Toggles between Folder and Track Mode. When in Folder Mode, you can use the FOLDER SELECT

buttons to navigate the folders of an MP3 disc. When in Track Mode, you can use the TRACK SELECT buttons to skip

forward or backward 10 tracks at a time.

12. LOOP IN – Sets a new cue point or the start point of a loop (a "Loop In" point) during playback.

13. LOOP OUT – Sets the end point of a loop (a "Loop Out" point) and starts playing the loop. While playing a loop, press

LOOP OUT to release it from the loop and continue normal playback.

14. RELOOP – Plays the track immediately from the beginning of a loop (and reactivates the loop).

15. PITCH – Activates or deactivates the PITCH FADER. You can also hold down this button and press the PITCH BEND –

/+ buttons to adjust the range of the PITCH FADER (±4%, 8%, and 16%). The current range will be indicated on the

LCD and by different LED colors.

16. PITCH FADER – The pitch can be changed by pressing the PITCH button so a PITCH LED is lit, then moving the sliding

fader. The pitch will not be changed if the PITCH LED is off.

17. PITCH BEND -/+ – You can use these two pitch bend buttons to temporarily adjust the pitch and tempo of the music.

18. KEY LOCK – While Key Lock is enabled, adjusting the pitch of the music playing on the deck will only influence its

tempo independent of its musical pitch.

19. TAP – Tap this button in time with the beats of the music on that deck. This will enter a new BPM ("beats per minute")

reading for that track, which will be shown on the LCD. You can allow the automatic beat-counter to read the track's

BPMs by holding it down until "AUTOBPM" is shown on the LCD.

20. RELAY – Press this button to activate or deactivate Relay Play. When activated, relay play will cause the opposite deck

to start playing whenever the currently playing deck stops. Playback will alternate between the two decks until one of

the decks reaches the end of its disc or until Relay Play is deactivated.

21. TIME – Switches the time display between "ELAPSED" playing time, "REMAINING" time on the track, and "TOTAL"

remaining time on the entire CD. Hold the button down to toggle between Single Play (the deck will stop at the end of

each track) or Continuous Play (the entire disc will be played without interruption).

22. ID-3 TAG – Press this button to display additional MP3 information. Pressing it more than once will toggle through all

the available information, including the track title, artist name, name of the current folder, and file name.

23. LCD – Indicates all the functions, as they are occurring, with the CD.

2 5 6

789

12 13 14 15

21 22

Product specificaties

Merk:	Numark
Categorie:	Mengpaneel
Model:	CDN450
Kleur van het product:	Zwart
Beeldscherm:	LCD
Equalizer-instellingen:	Ja
Soort apparaat:	Draagbare cd-speler
MP3 afspelen:	Ja
CD wisselaar:	Ja
Display met achtergrondverlichting:	Ja