Nodor NorFlow ROBIN BK Handleiding

Nodor Kraan NorFlow ROBIN BK

Lees hieronder de 📖 handleiding in het Nederlandse voor Nodor NorFlow ROBIN BK (7 pagina's) in de categorie Kraan. Deze handleiding was nuttig voor 35 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/7

FR MANUEL D’UTILISATION

M1 0X 1M1 0X 1

40 mm M ax.

3/8"BSP

●Before installation, please ensure that the following work

conditions are adhered to:

-Water temperature between 0˚C - 90˚C

-Water pressure between 0.05MPa – 1.0MPa. Pressure reducing

valve is necessary if pressure exceeds 1.2MPa

-Avoid major pressure differences between hot and cold water

supply

●Flush pipes thoroughly before and after installation to ensure

water supply is free of any debris.

●Inspect tap fitting and debugged to its best. Do not attempt to

disassemble fitting on your own.

●Use thread sealant tape (PTFE) on any screw joining

connections and ensure all joints are securely tightened.

1. An opening hole of 35mm diameter is required on sink top or work top (C) for installation of tap.

2. Slide the rubber O-ring (B) over the threaded tube and up to the base of tap (A).

3. Insert the threaded tube through the hole of sink top or work top (C) and position the tap properly.

4. Insert the Tri-bracket(D) first before sliding the rubber O-washer (E) and metal O-washer (F) over the

threaded tube and up to the underside of sink top or work top (C).

5. Screw the fixing bushing (G) up to the metal O-washer (F).

6. Connect the flexi hoses (H) to the extension tube on one end and the hot or cold water supply on the other

end. Please ensure that the hot water supply goes through the hot flexi hose while the cold water supply goes

through the cold flexi hose.

4095/4096/4097/4098/4099/4100/4101

Tap Body

Rubber O-ring

Sink top or Work top

D Tri-Bracket

F Metal O-washer

G Threaded fixing bushing

H Flexi bose

I Rubber O-ring for flexi hose

E Rubber O-washer

Mixers

Product specificaties

Merk:	Nodor
Categorie:	Kraan
Model:	NorFlow ROBIN BK
Kleur van het product:	Zwart
Hoogte (max):	280 mm
Montagewijze:	Op blad
Draaibaar:	Ja
Draaihoek:	360 °
Type cartridge:	Keramisch
Uitlooptype:	Standaard
Materiaal kraan:	Roestvrijstaal
Waterstroomregeling:	Kraanhendel
Aantal kranen/grepen:	Enkel
Buisvorm:	Type L
Slangaansluitdraad:	G3/8