Nitecore TM26 Handleiding
Lees hieronder de 📖 handleiding in het Nederlandse voor Nitecore TM26 (2 pagina's) in de categorie Zaklampen. Deze handleiding was nuttig voor 54 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/2
User Manual
Features
·The world’s smallest 4000 lumen LED flashlight
·Utilizes 4 x CREE XM-L2 U3 LEDs
·Integrated multi-function OLED display
·Thermal protection circuit prevents overheating
·Compatible with both 18650 Li-ion and CR123 batteries
·Intelligent charging circuit with voltage detection charges safely and rapidly
·Exceptionally long runtimes using 4 × 18650 Li-ion or 8 × CR123 batteries
·Capable of using 1 × 18650 or 2 x CR123 batteries in emergency situations
·Eight rapidly switchable brightness levels and modes to select from
·Innovative single button two-stage switch provides a user-friendly interface
(Chinese Patent: Z L201120062948.1)
·Toughened ultra-clear mineral glass with anti-reflective coating
·Integrated “Precision Digital Optics Technology” provides extreme reflector
performance
·Stainless steel bezel ring protects core components from damage
·Constructed from aerospace-grade aluminum alloy
·HAIII military grade hard-anodized
·Waterproof in accordance with IPX-8 (submersible to two meters)
Dimensions
Length: 142mm (5.6”)
Head diameter: 68 mm (2.68”)
Head side-length: 57mm (2.24”)
Tube diameter: 50mm (1.96”)
Weight: 438g (15.45oz) (without battery)
Accessories
Charger, quality holster, lanyard, and spare O-ring
Battery Options
Operation instructions
Battery installation
Unscrew the tailcap, insert 4 × 18650 Li-ion or 8 × CR123 batteries with the
positive (+) end pointing toward the flashlight head. Replace the tailcap. In
special circumstances, such as emergency situations, between one and three
18650 Li-ion or two and six CR123 batteries may be used.
Thanks for purchasing NITECORE!
Output & Runtime
NOTICE
The above data has been measured in accordance with the international
flashlight testing standards ANSI/NEMA FL1 using 4 x Nitecore 18650（3.7V
2600mAh) and 8 x Nitecore CR123 3V 1550mAh batteries under laboratory （
conditions. The data may vary during real-world use due to battery type,
individual usage habits and environmental factors.
®
The All-Round Flashlight Expert TM 26
Note 1: Due to the strain using less than 4 x 18650 or 8 CR123 places on
batteries, Nitecore recommends using this feature only when
necessary and for short periods of time. Please see point number 1
in the warning below.
Note 2: After loading batteries, “NITECORE” will be displayed on the OLED
screen for 2.5 seconds followed by battery voltage (accurate to
0.01V) after which the TM26 will enter into standby mode.
WARNING
1. Using less than 4 x 18650 or 8 x CR123 batteries can lead to turbo mode
malfunctioning, can trigger the overload protection circuit in Li-ion batteries
and can even lead to explosion of CR123 batteries. As such Nitecore
recommends this function is used with caution and only when necessary.
2. Insert batteries with the positive (+) end pointing toward the flashlight head.
3. Do not mix rechargeable and non-rechargeable batteries.
4. Do not mix batteries of different types/brands.
5. Do not mix batteries of different charge levels.
6. Do not use lithium batteries without a protected circuit board.
7. This product does not support unprotected 18650 Li-ion batteries. Please
also ensure that all the 18650 batteries used in the TM26 have a button top
configuration or they will not make contact with terminals in the battery
compartment. We recommend Nitecore 18650 batteries for the best
performance and reliability.
Charging the TM26
1. Connect the charging cable to the flashlight and the A/C power adapter to
the wall outlet as shown in the adjacent image. Fully charging four depleted
18650 batteries takes approximately 7 hours.
2. Under normal charging conditions, the on/off switch’s blue indicator light will
blink twice every second and the OLED screen with display the word
‘Charging...” together with battery voltage.
3. If a problem is detected while charging the TM26 will stop charging, the blue
indicator will blink rapidly and the OLED display will show the word
“ERROR”. This is usually caused by faulty or incorrectly inserted batteries.
4. When charging is complete, the blue indicator will remain on, and
“CHG.FINISHED” along with battery voltage will be displayed on the OLED
screen.
*Warning: Charge 18650 rechargeable Li-ion batteries only, do not attempt to
charge non-rechargeable batteries, CR123 or RCR123 batteries.
SIZE
Nominal voltage
Compatible
Primary Lithium battery * CR123 3V Yes (Compatible but can
NOT be recharged)
Yes (Compatible but can
NOT be recharged)
18650 Rechargeable Li-ion battery 18650 3.7V Yes (Recommended and
can be recharged)
Rechargeable Li-ion battery * RCR123 3.7V
TURBO HIGH MID LOW
LUMENS
1900
LUMENS
4000
LUMENS
700
LUMENS
230
45min
1
h
5
h min45
2
h min30
8
h min15
48
h
2
h min15
32
h
LOWER
LUMENS
3
1000
h
750
h
454m (Beam Distance)
51600cd (Peak Beam Intensity)
IPX-8, 2m
(Waterproof AND Submersible)
1.5m (Impact Resistant)
8×CR123
4×18650
SYSMAX Industry Co., Ltd.
TEL: +86-20-83862000
FAX: +86-20-83882723
E-mail: info@nitecore.com
Web: www.nitecore.com
Address： Rm1401-03, Glorious Tower, 850 East Dongfeng
Road, Guangzhou, China 510600
more than one second to exit lockout mode.
NB:
1. If the display button is pressed when in lockout mode, the OLED
display will show the words “LOCK OUT” as a reminder.
2. When TM26 is kept in a backpack or left unused for extended periods,
Nitecore recommends the bezel is loosened to cut off the power entirely,
thus saving battery power and preventing accidental activation of the
flashlight.
Power Tips
1. With the light switched on, the power indicator will blink once every two
seconds when power levels reach 50%.
2. With the light switched on, the power indicator will blink rapidly when
power levels are low.
Note: When the light is being used in ultra-low mode, the blue power
indicator will turn off to help conserve power.
Thermal protection
As the TM26 is very compact, extended operation in Turbo mode will
cause the body temperature to continually rise, thus, making it too hot to
comfortably hold. As a result, Nitecore does not recommend using the
TM26 in Turbo mode for extended periods. The TM26 has an integrated
thermal protection circuit which prevents overheating. With the light
turned on in Search/Turbo mode, for user safety and to protect the
flashlight from failure, the TM26 will automatically reduce its output to
prevent overheating once it has reached 60 degrees.
Precaution: When the flashlight is hot, do not attempt to cool it by
submerging it in liquid. Due to the differences in internal
and external air pressure the TM26 may suffer irreparable
water damage.
Changing / Charging Batteries
When the power indicator blinks rapidly it means the batteries need to be
replaced or recharged. Alternatively if the light becomes dim or
unresponsive to adjustment this also indicates batteries need to be
replaced or recharged.
Maintenance
Every 6 months, threads should be wiped with a clean cloth followed by a
thin coating of silicon-based lubricant.
Warranty Service
All NITECORE® products are warranted for quality. Any defective /
malfunctioning NITECORE® product can be repaired free of charge for a period
of 60 months (5 years) from the date of purchase. Beyond 60 months (5 years),
a limited warranty applies, covering the cost of labor and maintenance, but not
the cost of accessories or replacement parts.
The warranty is nullified in all of the following situations:
1. The product(s) is/are broken down, reconstructed and/or modified by
unauthorized
parties.
2. The product(s) is/are damaged through improper use.
3. The product(s) is/are damaged by leakage of batteries.
For the latest information on NITECORE® products and services, please
contact a local NITECORE® distributor or send an email to
service@nitecore.com
※All images, text and statements specified herein this user manual are for
reference purpose only. Should any discrepancy occurs between this manual
and information specified on www.nitecore.com, information on our official
website shall prevail. Sysmax Industry Co., Ltd. reserves the rights to interpret
and amend the content of this document at any time without prior notice.
General Operation
NB: The TM26 utilizes a 2-stage switch similar to a camera shutter button. The
light’s numerous functions are selected according to the depth the switch
is pressed.
The TM26 has two modes: Daily mode and Turbo mode. With the TM26 turned
off, pressing the switch partway down will activate Daily mode. Alternatively,
with the TM26 turned off, pressing the switch all the way down will activate
turbo mode. The TM26 is turned off by pressing the switch all the way down.
Brightness Selection In Daily Mode
1. With the TM26 turned on in Daily mode, press the switch partway down to
select a brightness level of ultra-low, low, medium or high. The selected
brightness level will be memorized when the light is turned off.
2. With the TM26 turned on in Daily mode, press the switch partway down and
hold to enter into turbo mode. A second partway press will revert back to the
brightness level last used.
Bright Selection In Turbo Mode
With the TM26 turned on in Search/Turbo mode, partway presses of the button
will cycle between high and ultra-high mode. There is no memory function in
Search/Turbo mode.
Momentary Daily / Turbo Mode
1. With the TM26 turned off, press the switch partway down and hold to
activate Momentary Daily mode. Release the switch to turn the light off
again.
2. With the TM26 turned off, press the switch all the way down and hold to
enter into Momentary Turbo mode. Release the switch to turn the light off
again.
Standby Mode
With the TM26 turned on, press the switch all the way down and release within
one second to enter into standby mode. In this mode, the light will consume
small amounts of power to maintain the settings in the MCU (micro control unit)
but appear to be turned off. When in standby mode the power indicator light will
flash once every three seconds to show the location of the light.
OLED Display
1. When the TM26 is turned on, the OLED display will activate automatically
and show lumen output, brightness mode, battery voltage, battery status,
approximate runtime and temperature. After displaying this information for
several seconds the OLED display will turn off. The display can be
reactivated by pressing the display switch and the information can be cycled
through with subsequent presses of the switch.
2. When in Standby mode, a single press of the OLED display switch will
activate the OLED and display battery voltage for 10 seconds.
3. When using Nitecore’s NBP52 high-performance battery pack, the actual
runtime will be twice the figure displayed on the OLED panel.
NB: The TM26 has an integrated thermal protection circuit which prevents
overheating. Please refer to the “Thermal protection” section of this
manual for details.
Special Strobe / SOS mode and
Location Beacon
With the light turned on, press the switch all the way down twice in quick
succession to access strobe mode. When in strobe mode, press the switch
partway down to cycle through SOS, location beacon and strobe modes. To
select any of these modes simply release the switch when it is displayed. To
turn off the light (enter into standby mode) fully press and release the switch.
NB: When in any of the special modes, the OLED display will remain on to
display which mode is being used.
Demonstration mode
When entering standby mode simultaneously press and hold the display switch
and the on/off switch to enter into Demonstration mode. In Demonstration
mode, the OLED screen will cycle through the TM26’s various messages.
Simply press any button to exit Demonstration mode.
Lockout Function
With the light turned on, press the switch all the way down and hold for more
than one second. The light will turn off and enter into lockout mode. Lockout
mode consumes almost no battery power and prevents the light from
accidentally turning on. Simply press and hold the switch all the way down for
Thanks for purchasing NITECORE!
®
The All-Round Flashlight Expert
Please find us on facebook: NITECORE Flashlights
20150916
Product specificaties
| Merk: | Nitecore |
| Categorie: | Zaklampen |
| Model: | TM26 |
Heb je hulp nodig?
Als je hulp nodig hebt met Nitecore TM26 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Zaklampen Nitecore
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
Handleiding Zaklampen
- Zaklampen Panasonic
- Zaklampen Alecto
- Zaklampen Ansmann
- Zaklampen LED Lenser
- Zaklampen Makita
- Zaklampen Milwaukee
- Zaklampen Silva
- Zaklampen Worx
- Zaklampen Crivit
- Zaklampen Black And Decker
- Zaklampen Anslut
- Zaklampen Barska
- Zaklampen Fenix
- Zaklampen Klarus
- Zaklampen Maglite
- Zaklampen Masai
- Zaklampen Olight
- Zaklampen Pelican
- Zaklampen Petzl
- Zaklampen Streamlight
Nieuwste handleidingen voor Zaklampen
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022