Ansmann RC 1 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Ansmann RC 1 (48 pagina's) in de categorie Zaklampen. Deze handleiding was nuttig voor 30 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/48
Operating instructiOns
D Bedienungsanleitung
F Manuel d’utilisatiOn
ИнструкцИя по эксплуатацИИ
сверхбыстрого
i Manuale d’istruziOne
H Használati utasítás
E instrucciOnes de ManejO
lietošanas instrukc jaİ
S instruktiOnsManual
Bruger Manual
geBruiksaanwijzing
zastosowanie
návod k použi
kasutusjuHis
navodila za uporabo
za polnilnik
rc1
Operating instructiOns
use OF tHe tOrcH
The RC 1 is a rechargeable torch with krypton
bulb (KR 2.2V/0.5A/P13.5). It is powered by a
2.4 V NiMH battery pack with 1,200 mAh and
can be recharged direct at any 230 V mains
socket. The magnet allows the torch to be stuck
to any magnetic surface.
cHarging
Charge the torch before using it for the rst time.
To charge, remove the complete bottom part of the
lamp (consisting of battery pack, charging electro-
nics and power plug) from the slot. Connect it to
a 230 V mains socket. The integrated recharge-
able battery pack is then being charged with a
charging current of approx. 120 mA. The char-
ging time up to the maximum charge is around
10 hours. The battery pack can be left attached
to the mains until the torch is needed. The lamp is
charged continuously to avoid losing capacity.
Operating tiMe
The operating time of the RC 1 torch is around
120 minutes.
OPERATION
If you want to use the torch, disconnect the bat-
tery pack from the mains. By pushing the slide
switch towards the head of the lamp, the torch is
switched on. The integrated magnet at the lower
part of the torch allows the lamps to be stuck to
metallic surfaces when in operation.
Attention: The bulb is sensitive to shocks.
If the lamp drops, the thin lighting la-
ment in the bulb may break. Please re-
charge the lamp early enough when in
use. Never leave the lamp switched on
with empty batteries as this may cause
damages to the battery pack.
REPLACING THE BULB
Turn the head of the torch anticlockwise and
remove the reflector and the bulb. The bulb
can now easily be replaced. A spare bulb is
attached to the inside of the lamp head.
ACCESSORIES
Includes: blue carrying strap, 230 V power supply.
Charging electronics and 1,200 mAh/2.4 V batte-
ry pack are integrated in the torch. A mains adap-


Product specificaties

Merk: Ansmann
Categorie: Zaklampen
Model: RC 1

Heb je hulp nodig?

Als je hulp nodig hebt met Ansmann RC 1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden