Nissin Di866 Mark II Handleiding

Nissin Flitser Di866 Mark II

Lees hieronder de 📖 handleiding in het Nederlandse voor Nissin Di866 Mark II (11 pagina's) in de categorie Flitser. Deze handleiding was nuttig voor 60 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/11

INSTRUCTION MANUAL

DIGITAL TTL POWER ZOOM FLASH

Please refer Nissin’s compatibility chart shown in its home page for details.

http://www.nissin-japan.com or http://www.nissindigital.com

SIMPLE OPERATION

When attaching Di866 Mark II to the camera, the basic flash exposure

operation is fully controlled by the camera. It is the same idea as when you use

the built-in camera flash, but it is placed on the hotshoe of the camera instead

of using the built-in flash.

ADVANCED FUNCTIONS

Di866 Mark II provides many advanced flash functions.

Wireless TTL off camera flash technology, high speed shutter synchronization,

frequent repeat-flash system, External Av priority setting, etc. are supported.

1 2

Compatible cameras

Thank you for purchasing a Nissin product

UNIQUE FUNCTION

Before using this flash unit, please read this instruction manual and refer

your camera owner’s manual carefully to get a better understanding of

proper operation to enjoy flash photography.

The color display automatically rotates

to allow for easy operation in both the

horizontal and vertical positions.

Nissin Di866 Mark II type Canon is designed for Canon digital SLR, with the

latest TTL flash control system, and features Nissin’s original rotating color

display, easily guiding its operations.

It works automatically with Canon ETTL/ ETTL II auto-flash systems.

Please note that Di866 Mark II type C is not usable with other branded cameras

for TTL operation.

Nissin Jap an Ltd. , Tokyo

http://www.nissin-japan.com

Nissin Marketing Ltd . , Hon g Kong

http://www.nissindigital.com

C0111 REV. 1.2

Type C

Design and Specifications are subject to change without prior notice.

Di866 Mark II Flash Mode and Functions - to be set on the flash unit. Advanced functions are provided in some operation modes –

to be set on the flash unit

Functions by Camera setting – The flash is automatically

controlled by the camera

These safety instructions refer to important information on how to use this

product safely and properly. Please read the following instructions before using

the product.

MENU SCREEN FOR MAIN MODES

5 6

3 4

Flash light is fully controlled by the camera for the most proper exposure.

*1 Effective on at Universal Slave function in Manual Power operation and when using Di866 Mark II with

film type camera or with non dedicted camera.

*2 Effective on Universal Slave function, and when using Di866 Mark II with film type camera or with non

dedicated camera.

ADVANCED FUNCTIONS

SAFETY INSTRUCTIONS Nomenclature

WARNING

The flash unit contains high voltage electric parts. Do not try to open or repair the flash unit. Return it back

to the repair service station or the store you bought it from.

Do not touch the inside parts from the opening when the unit was dropped or broken.

Do not shoot the flash directly to the eye at short distance. It may damage the eye.

When taking a flash picture, especially toward a baby, it is recommended to keep the flash unit at least 1

meter (3.3feet) away from the subject. Or use diffuser or bounce the light to the ceiling or to the wall to

soften its intensity.

Do not place the flash unit near any flammable gas, chemical or such liquids. It may cause fire or electric

shock.

Do not touch the flash unit with wet hands or use in the water. The flash unit carries high voltage inside and

it may cause an electric shock.

Do not shoot the flash unit directly at the driver of automobiles or such vehicles.

Do not set the flash window close to the human body and shoot, which may get burned.

Place the batteries correctly in position. Placing the batteries in wrong polarity may cause leakage,

exothermic heat or explosion.

CAUTIONS

Do not leave or store the flash unit in the temperature over 40ºC, such as in the automobile.

The flash unit is not water resistance. Keep the unit away from rain, snow and humidity.

Do not use benzene, thinner or other alcoholic agents to clean the unit.

Do not use this flash unit with the cameras which are not recommended in compatibility list at official

website, otherwise it may damage the camera’s circuitry.

Remove the batteries when not in use for a longer period of time.

Do not have a heavy impact to the flash unit, nor throw it onto a hard surface floor.

When using the external power pack, read the safety instructions carefully and follow the operation manual.

This sign refers the danger or serious damage.

This sign refers the damage or defect.

Full Automatic Mode

TTL Program Mode

Manual Setting Mode

Multi- flash Mode

Wireless Remote Flash Mode

Custom Setting Mode

Full Automatic Mode

…

page 10

Flash light is automatically controlled by the camera but the flash exposure

TTL Program Mode page 12

Manual Mode -Selecting the desired manual power on the flash unit,

Manual Setting Mode page 17

Multiple lighting exposes the playback photos in one frame of picture.

Multi-flash Mode page 23

Placing multiple numbers of flashes (slave flash) off camera and controlling the

Wireless Remote Flash Mode page 25

Variety of custom settings is available for own default value.

Custom Setting Mode page 33

Advanced

Functions

Operation Modes

Sub-Flash

Manual Zoom

Slave Function

F.Stop Setting*1

ISO setting*2

TTL Program Mode

Manual Setting Mode

Flash exposure can be locked at the main subject while moving the framing.

FE. Lock page 34

FE.

Lock

value can be compensated.

Av poriority Mode- Selecting the desired f-stop on the flash unit.

creative TTL lighting.

Light diffusing panel Fill-in reflector

Flash head/

Wireless transmitter

Sub-Flash

AF-assist light

External auto exposure sensor

Rotating

display screen

Set button

Pilot lamp (Test flash button) On/Off switch (System lock button)

Select button

Flash stand

Extra

battery magazine

(optional)

Battery magazine

Lock ring

X-terminal

USB service port

Power Pack socket

Hotshoe contacts

Foot lock pin

External service

box

Mounting foot

Multifunction button

Soft Case

Remote/ Slave sensor

NOTE

BASIC OPERATION

SETTING THE MODE AND THE FUNCTION

Remove the battery magazine and insert

4 x size AA batteries as shown in the

picture.

Press the on/off switch. Screen A appears, and the mode A is set.

The pilot lamp blinks red showing the unit is charging.

In a few seconds, the pilot lamp turns green.

The display screen automatically turns off in about 30 seconds after the

setting job is terminated.

For a test-flash, press the pilot lamp.

To turn off the flash unit manually, press the on/off switch and hold it for 2

seconds.

Set Di866 Mark II to the camera’s hotshoe and press the on/off switch to power

on.

Display screen automatically shows A, the Full Automatic

Mode.

Di866 Mark II is now set for the camera’s automatic flash

control system.

Press the on/off switch once again to lock this condition on

your flash. (Press it again to release the lock)

All the jobs required for this mode are completed.

When the pilot lamp turns green, press the shutter button of your camera

halfway to focus the subject.

Shutter speed, aperture and flash mark ( ) are shown in camera’s view finder

and the display panel of the camera.

Press the shutter, and Di866 Mark II is fired. The result is immediately shown on

the camera’s LCD monitor.

Flash power is automatically controlled by the camera and the most proper

exposure is obtained on your picture.

When you change the focal length of your camera lens, Di866 Mark II responds

without delay and sets its light source for the proper illumination angle.

The battery compartment is specially

designed so that every cell is placed in the

same direction to avoid the confusion in

poor light condition.

It is recommended to use all 4 batteries in same brand and type, and

replace them all at the same time.

Wrong insertion of each cell would not make electric contact.

+/- symbol is clearly marked at the battery

compartment.

Place the battery magazine back into the

body.

7 8

910

The power is automatically turned off (to stand-by mode), in about 30

seconds of idle use on the camera or after the last setting is made. To

save the battery energy, you can select the display-off setting from the

custom setting. In this case, the display screen turns off in about 8

seconds of idle use.

While Di866 Mark II is in the stand-by mode, display screen turns off

and the pilot lamp blinks every 2 seconds showing the flash unit is in

stand-by mode.

To turn on Di866 Mark II again, press the camera’s shutter button

halfway or press any button of the flash unit.

In case the Di866 Mark II is not in use over 30 minutes, the unit is

completely turned off. To turn on Di866 Mark II again, take the first step

of turning the flash unit on.

In case of using Di866 Mark II in off-camera-use mode (Wireless TTL

flash-slave, Universal Slave function), it is recommended to change the

turn off timer at the Custom setting....ref. page 33 .

The mode and the value set on the flash unit before turning off is

memorized and returns in the same condition when switch it on again.

When the recycle time becomes longer

than 20 seconds, replace the batteries

with the fresh ones or recharge the

batteries (rechargeable batteries).

Turn off the power switch of both Di866

Mark II and the camera

Turn the lock ring of Di866 Mark II to

loosen it all the way as shown in the

picture.

Slide the mounting foot of Di866 Mark II

into the hotshoe of the camera.

Turn the lock ring to opposite direction

and tighten it.

Lock pin comes out to hook the foot at the

hotshoe for sure contact.

Loosen the lock ring and slide the mounting foot of Di866 Mark II off the

hotshoe of the camera. Make sure to turn the lock ring all the way to

completely clear the lock pin off the hooking slot on the hotshoe.

Inserting batteries

Turn on the flash unit

Mounting Di866 Mark II on the Camera

Removing Di866 Mark II from the Camera

Di866 Mark II has energy saving double power off function.

Full Automatic Flash Control

Usable batteries - Alkaline batteries, Lithium batteries, NiMH batteries.

The modes to be set on the camera:

In all the camera modes listed above, Di866 Mark II will automatically

and fully work in ETTL / ETTL II automatic flash control system.

(Full Auto), (Program), (Shutter priority),

Portrait, Landscape, Close-up, Sports,

Av A-DEP

Night Portrait.

(Aperture priority), (Manual), Automatic depth-of-field,

Product specificaties

Merk:	Nissin
Categorie:	Flitser
Model:	Di866 Mark II
Kleur van het product:	Zwart
Gewicht:	380 g
Brandpuntbereik:	24~105 mm
Ondersteund aantal accu's/batterijen:	4
Flitser-modi:	Fill-in, Manual, Red-eye reduction, Slow synchronization
Opbergetui:	Ja
Kleurtemperatuur:	5600 K
Draadloze verbindingen:	Ja
Auto Focus (AF) assisteer straal:	Ja
Aantal kanalen:	4 kanalen
Afmetingen (B x D x H):	74 x 113 x 139 mm
Type batterij:	AA
Bereik:	0.7 - 10 m
Compatibele camera merken:	Sony
Oplaadtijd (ongeveer):	5.5 s
Richtgetal (35mm zoomstand, ISO 100):	40 m
Merk specifieke flits systemen:	ADI (Minolta), P-TTL (Pentax)
Richtgetal flitser:	60 m
Group settings:	3
kantel aanpassingen:	Ja
Aantal flitsen (ongeveer):	150 - 1500