Nissin MF18 Macro Ring Handleiding
Lees hieronder de 📖 handleiding in het Nederlandse voor Nissin MF18 Macro Ring (8 pagina's) in de categorie Flitser. Deze handleiding was nuttig voor 50 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/8
INSTRUCTION MANUAL
Type C / N
DIGITAL TTL MACRO FLASH
Nissin Japan Ltd., Tokyo
http://www.nissin-japan.com
Nissin Marketing Ltd., Hong Kong
http://www.nissindigital.com
MF0611 REV. 1.2
Design and Specifications are subject to change without prior notice.
1
Thank you for purchasing a Nissin product
UNIQUE FUNCTION
Before using this flash unit, please read this instruction manual and refer
your camera owner’s manual carefully to get a better understanding of
proper operation to enjoy flash photography.
The color display automatically rotates to allow
for easy operation in both the horizontal and
vertical positions.
Nissin Macro Flash MF18 is a flash system for taking close-up photos of small
subjects using a flash to eliminate shadows, allowing you to enjoy photography.
This instruction manual is intended mainly for Canon or Nikon digital SLR, with
the latest TTL flash control system, and features Nissin’s original rotating color
display, easily guiding its operations.
It works automatically with Canon ETTL / ETTL II or Nikon i-TTL auto-flash
systems. The provided adapter rings make it available for use with different
lens. Please note that MF18 is not usable with other branded cameras for TTL
operation.
2
m
m
Please refer Nissin’s compatibility chart shown in its home page for details.
http://www.nissin-japan.com or http://www.nissindigital.com/download.html
SIMPLE OPERATION
When attaching MF18 to the camera, the basic flash exposure operation is fully
controlled by the camera. It is the same idea as when you use the built-in
camera flash, but it is placed on the hotshoe of the camera instead of using the
built-in flash.
ADVANCED FUNCTIONS
MF18 provides advanced flash functions including 1st curtain synchronization,
Rear curtain synchronization and High speed shutter synchronization are
supported.
Compatible cameras
A B
These safety instructions refer to important information on how to use this
product safely and properly. Please read the following instructions before using
the product.
3
SAFETY INSTRUCTIONS
WARNING
The flash unit contains high voltage electric parts. Do not try to open or repair the flash unit. Return it back
to the repair service station or the store you bought it from.
Do not touch the inside parts from the opening when the unit was dropped or broken.
Do not shoot the flash directly to the eye at short distance. It may damage the eye.
When taking a flash picture, especially toward a baby, it is recommended to keep the flash unit at least 1
meter (3.3feet) away from the subject. Or use diffuser or bounce the light to the ceiling or to the wall to
soften its intensity.
Do not place the flash unit near any flammable gas, chemical or such liquids. It may cause fire or electric
shock.
Do not touch the flash unit with wet hands or use in the water. The flash unit carries high voltage inside and
it may cause an electric shock.
Do not shoot the flash unit directly at the driver of automobiles or such vehicles.
Do not set the flash window close to the human body and shoot, which may get burned.
Place the batteries correctly in position. Placing the batteries in wrong polarity may cause leakage,
exothermic heat or explosion.
CAUTIONS
Do not leave or store the flash unit in the temperature over 40ºC, such as in the automobile.
The flash unit is not water resistance. Keep the unit away from rain, snow and humidity.
Do not use benzene, thinner or other alcoholic agents to clean the unit.
Do not use this flash unit with the cameras which are not recommended in compatibility list at official
website, otherwise it may damage the camera’s circuitry.
Remove the batteries when not in use for a longer period of time.
Do not have a heavy impact to the flash unit, nor throw it onto a hard surface floor.
When using the external power pack, read the safety instructions carefully and follow the operation manual.
This sign refers the danger or serious damage.
This sign refers the damage or defect.
4
Nomenclature
Display screen
Extra battery magazine
Lock ring
Hotshoe contacts
Foot lock pin
Adapter Rings x 6
52 / 58 / 62 / 67 / 72 / 77 mm
X-terminal
USB service port
Power Pack socket
External service box
Flash tube
Battery magazine
Set button
Select button
Select button
On/Off switch / Lock button
Pilot button
Mounting tabs
LED lamp (4x)
Expansion button
Release button
Release button
*49 / 55 / 82 mm (optional for purchase) (optional for purchase)
MF18 Flash Modes and Functions - to be set on the flash unit. For Canon: Functions by Flash setting
MENU SCREEN FOR MAIN MODES
56
Flash light is fully controlled by the camera for the most proper exposure.
ADVANCED FUNCTIONS
Full Automatic Mode
TTL Program Mode
Wireless Mode (Master)
Fine Macro Mode
Manual Mode
Custom Setting Mode
Full Automatic Mode
…
…
…
…
…
…
page 11
Flash light is automatically controlled by the camera but the flash exposure
TTL Program Mode page 13
Master Mode - Selecting the desired manual power on the ring flash
Wireless Mode (Master) page 15
Setting the flash power from 1/128 to 1/1024 with 1/6 Ev steps.
Fine Macro Mode page 18
Setting the flash power from 1/1 (Full) to 1/64 with 1/3 Ev steps.
Manual Flash Mode page 19
Variety of custom settings is available for own default value.
Custom Setting Mode page 20
Flash exposure can be locked at the main subject while moving the framing.
FE. Lock page 21
FE.
Lock
value can be compensated.
(Group A and B) and controlling the slave flashes (Group A or C).
m
m
m
Flash synchronizes to the faster shutter speed than regular synchronization speed.
High speed shutter synchronization page 22
The flash fires just before the rear curtain closes. A moving subject will appear with
Rear curtain synchronization page 23
Flash exposure can be locked at the main subject while moving the framing.
Fv. Lock page 21
Fv.
Lock
The flash fires immediately after the first curtain has fully opened.
1st curtain synchronization page 22
For Nikon: Functions by Camera setting
Flash synchronizes to the faster shutter speed than regular synchronization speed.
High speed shutter synchronization (FP) page 23
The flash fires immediately after the first curtain has fully opened.
1st curtain synchronization page 23
such moving marks behind.
The flash fires just before the rear curtain closes. A moving subject will appear with
Rear curtain synchronization
such moving marks behind.
A B
page 23
NOTE
BASIC OPERATION
Remove the battery magazine and insert
4 x size AA batteries as shown in the
picture.
The battery magazine is specially
designed so that every battery is placed in
the same direction to avoid the confusion
in poor light condition.
It is recommended to use all 4 batteries in same brand and type, and
replace them all at the same time.
Wrong insertion of each cell would not make electric contact.
+/- symbol is clearly marked at the battery
compartment.
Place the battery magazine back into the
body.
!
1.
2.
4.
When the recycle time becomes longer
than 20 seconds, replace the batteries
with fresh ones or recharge the batteries
(rechargeable batteries).
3.
Inserting batteries
Usable batteries - Alkaline batteries, Lithium batteries, NiMH batteries.
The power is automatically turned off (to stand-by mode), in about 30
seconds of idle use on the camera or after the last setting is made. To
save the battery energy, you can select the display-off setting from the
custom setting. In this case, the display screen turns off in about 8
seconds of idle use.
While MF18 is in the stand-by mode, display screen turns off and the
pilot lamp blinks every 2 seconds showing the flash unit is in stand-by
mode.
To turn on MF18 again, press the camera’s shutter button halfway or
press any button of the flash unit.
In case the MF18 is not in use over 30 minutes, the unit is completely
turned off. To turn on MF18 again, take the first step of turning the flash
unit on.
The mode and the value set on the flash unit before turning off is
memorized and returns in the same condition when switched on again.
1.
2.
MF 18 has energy saving double power off function.
Press the on/off switch. Main screen appears.
The pilot lamp blinks red showing the unit is charging.
In a few seconds, the pilot lamp turns green.
The display screen automatically turns off in about 30 seconds after the
setting job is terminated.
For a test-flash, press the pilot lamp.
To turn off the flash unit manually, press the on/off switch and hold it for 2
seconds.
Turn off the power switch of both MF18
and the camera
Loosen the lock ring of MF18 so the
hotshoe mounts easily.
Slide the mounting foot of MF18 into the
hotshoe of the camera from the back.
Turn the lock ring to opposite direction
and tighten it.
1.
2.
3.
4.
Loosen the lock ring and slide the mounting foot of MF18 off the hotshoe of
the camera. Make sure to turn the lock ring all the way to completely clear
the lock pin off the hooking slot on the hotshoe. Press the release button on
the flash head and remove. Screw the adapter ring off the front thread of the
lens.
Turn on the flash unit
Mounting MF18 on the Camera
Removing MF18 from the Camera
Screw the adapter ring that is the same
size as the lens onto the front thread of
the lens.
5.
Attach the flash head to the adapter.
Press the release buttons on top and
bottom of the flash head to insert the four
mounting tabs on the inside of the flash
head correctly into the groove on the
adapter ring.
After the flash head is attached, pull it
lightly to make sure the tabs are inserted
into the groove correctly.
6.
7.
Expansion of the Flash Head
Press the expansion buttons on the sides
of flash head.
The flash head is expanded. It is possible
to expand one side if necessary.
1.
2.
After the flash head has been attached, should you experience vignetting due
to the flash covering a part of the lens, it is recommended that the flash ring
be expanded to its wide position. This should eliminate the dark corners on
the image. (It is also depending on the angle of view).
Remark: This Macro flash is preferable to apply on macro lens. For zoom lens, please adjust the
suitable position to prevent the dark corners.
To close the expansion, push it lightly
back to the original position.
3.
Modeling LED lamps function
The modeling LED lamps with light ratio control, makes it easy to focus on
the shooting subject. The brightness reflects flash power ratio setting of side
A and B; therefore, the desired effect can be previewed.
To switch on the modeling LED lamps,
press set for 2 seconds.
The LED lamps switch off temporarily
when the flash fires, then switch on again
for the next shoot. The icon ( ) is
indicated on the screen.
1.
2.
To switch off the modeling LED lamps,
press set for 2 seconds.
3.
Set
Set
7 8
9 10
Product specificaties
| Merk: | Nissin |
| Categorie: | Flitser |
| Model: | MF18 Macro Ring |
Heb je hulp nodig?
Als je hulp nodig hebt met Nissin MF18 Macro Ring stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Flitser Nissin
12 Juni 2024
7 Augustus 2023
2 Juli 2023
19 Juni 2023
17 Juni 2023
17 Juni 2023
17 Juni 2023
14 Juni 2023
13 Juni 2023
12 Juni 2023
Handleiding Flitser
- Flitser Braun
- Flitser Sony
- Flitser Panasonic
- Flitser Nikon
- Flitser Canon
- Flitser Olympus
- Flitser Dorr
- Flitser Easymaxx
- Flitser Fujifilm
- Flitser Godox
- Flitser Kenko
- Flitser Konica Minolta
- Flitser Konig
- Flitser Leica
- Flitser Logilink
- Flitser Metz
- Flitser Minox
- Flitser Neewer
- Flitser Pentax
- Flitser Pulsar
- Flitser Quantum
- Flitser Ricoh
- Flitser Rollei
- Flitser SeaLife
- Flitser Sigma
- Flitser Sunpak
- Flitser Triopo
- Flitser Vivitar
- Flitser Yongnuo
- Flitser Goodram
- Flitser Vello
- Flitser Manfrotto
- Flitser Cullmann
- Flitser Xit
- Flitser Hähnel
- Flitser Ikan
- Flitser GVM
- Flitser Genaray
- Flitser Profoto
- Flitser Anton/Bauer
- Flitser Impact
- Flitser Lume Cube
- Flitser Aputure
- Flitser Xantech
- Flitser Bolt
- Flitser Elinchrom
- Flitser Rotolight
- Flitser SWIT
- Flitser COLBOR
- Flitser Cactus
- Flitser PolarPro
- Flitser ANDYCINE
- Flitser Westcott
- Flitser Ikelite
- Flitser Kaiser Fototechnik
- Flitser Lastolite
- Flitser FoxFury
- Flitser Jinbei
- Flitser Quadralite
Nieuwste handleidingen voor Flitser
6 Oktober 2024
1 Oktober 2024
30 September 2024
5 September 2024
31 Juli 2024
30 Juli 2024
30 Juli 2024
30 Juli 2024
29 Juli 2024
29 Juli 2024