Nedis WEST203WT Handleiding
Nedis
Weerstations
WEST203WT
Lees hieronder de 📖 handleiding in het Nederlandse voor Nedis WEST203WT (126 pagina's) in de categorie Weerstations. Deze handleiding was nuttig voor 42 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/126
WEST203WT
MANUAL (p. 2)
ANLEITUNG (S. 7)
MODE D’EMPLOI (p. 12)
GEBRUIKSAANWIJZING (p. 17)
MANUALE (p. 22)
MANUAL DE USO (p. 27)
MANUAL (p. 32)
HASZNÁLATI ÚTMUTATÓ (o. 37)
KÄYTTÖOHJE (s. 42)
BRUKSANVISNING (s. 47)
NÁVOD K POUŽITÍ (s. 52)
MANUAL DE UTILIZARE (p. 57)
ΕΓΧΕΙΡΙΔΙΟ XPHΣHΣ (σελ. 62)
BRUGERVEJLEDNING (s. 67)
VEILEDNING (s. 72)
ИНСТРУКЦИЯ (77 стр.)
KILAVUZ (s. 82)
KASUTUSJUHEND (lk. 87)
NÁVOD (s. 92)
ROKASGRĀMATA (lpp. 97)
NAUDOJIMO VADOVAS (102 p.)
PRIRUČNIK (str. 107)
РЪКОВОДСТВО (p. 112)
INSTRUKCJA OBSŁUGI (str. 117)
PRIROČNIK (str. 122)
Weather Station
ENGLISH
Part I
This weather station has 7 dierent language options: English, German, French,
Italian, Spanish, Dutch and Danish.
The weather station has 6 dierent buttons: CH, ALERT, MAX/MIN, C/F, 12/24,
SNOOZE/LIGHT. These buttons are used for the following functions:
1. CH Button
The CH button is used to select channel 1, 2 or 3 while receiving the signal
from the transmitter. Please note that the selected channel must comply
with the selected channel on the transmitter. For example: if the transmitter
is set to channel 1, the weather station needs to be set to channel 1 as well.
2. ALERT Button
While in normal display mode, press this button to activate or deactivate
the temperature alert function. An arrow icon will appear to indicate the
function has been activated, or the arrow icon will disappear to indicate the
alarm is deactivated.
While in normal display mode, press and hold this button for 3 seconds to
enter the temperature alert settings. The indoor temperature digits will
start ashing; press the DOWN button at the rear to set the temperature
(0°C~50°C) at which the station has to sound an alarm.
3. MAX/MIN Button
Press this button to display the maximum temperature and humidity of
both indoors and outdoors.
Press again to display the minimum temperature and humidity of both
indoors and outdoors.
4. Set Alarm
Press ALARM button at the back to display the alarm time.
To set the alarm time, press ALARM time once, the alarm time displays, hold
the button for 3 seconds, alarm HOUR digit ashes, use UP or DOWN to set
the alarm hour.
Press the ALARM button again, the alarm MINUTE digit ashes, use UP or
DOWN to set the alarm minutes.
5. Activate/Deactivate the Alarm Function
Under Alarm Mode , press “ALARM” button at the rear to activate or
deactivate the alarm function. Alarm bell sign will appear or disappear
accordingly.
ENGLISH
6. C/F Button
Press the C/F button to switch the temperature display between C/F. Press
and hold button for 3 seconds to force the unit to enter the RCC reception.
7. 12/24 Hr Button
Press 12/24-hour button to toggle between 12/24-hour formats.
8. Use Snooze
When alarm activates, press SNOOZE to stop the alarm sound, alarm will
sound again after 5 minutes.
9. MOON PHASE
It will calculate the moon phase automatically according to the calculator,
the moon phase being divided into 8 degrees.
Temperature and Humidity:
1. Temperature range indoors: 0 °C~50 °C (32 °F~122 °F);
Temperature range outdoors: -50 °C~70 °C (-58 °F~158 °F).
2. Range of humidity: 20%–99%.
3. Tendency of temperature change: one check per hour, compared to
previous data. If the temperature changes more than 1 °C the arrow will be
at.
RCC Reception Mode:
1. RCC reception format: DCF, the reception time is about 10 minutes.
2. RCC reception way.
3. It will begin to receive the RCC 3 minutes after turning on the unit.
4. RCC reception graphic:
The tower graphic ashes when receiving, the tower graphic will also ash
when lost or no signal. The tower graphic will not ash when synchronizing
the signal, but the arc-shaped antenna symbol on top of the tower
graphic is ashing. The whole RCC reception graphic will display when the
reception is successful: The tower graphic will turn o and exit RCC when
the signal reception fails.
Part II
There are 7 buttons at the rear: LIGHT, CHANNEL, RESET, DOWN, UP, ALARM/
SET, TIME/SET. These buttons are used for the following functions:
1. LIGHT Button
In normal display mode press this button, the LED will light up.
Product specificaties
| Merk: | Nedis |
| Categorie: | Weerstations |
| Model: | WEST203WT |
Heb je hulp nodig?
Als je hulp nodig hebt met Nedis WEST203WT stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Weerstations Nedis
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
Handleiding Weerstations
- Weerstations Ade
- Weerstations Alecto
- Weerstations Ascot
- Weerstations Auriol
- Weerstations Brigmton
- Weerstations Denver
- Weerstations Eurochron
- Weerstations Hama
- Weerstations Hyundai
- Weerstations Irox
- Weerstations Konig
- Weerstations La Crosse
- Weerstations Livoo
- Weerstations Meade
- Weerstations Techno Line
- Weerstations Technoline
- Weerstations TFA
- Weerstations UPM
- Weerstations Ventus
- Weerstations Viking
- Weerstations Oregon
- Weerstations Clas Ohlson
- Weerstations GoGEN
- Weerstations Steren
- Weerstations Conrad
- Weerstations EMOS
- Weerstations Cotech
- Weerstations Cresta
- Weerstations Prologue
- Weerstations Trevi
- Weerstations Kemot
- Weerstations AcuRite
Nieuwste handleidingen voor Weerstations
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022