NAV-TV NTV-KIT788 Handleiding

NAV-TV Dashcam NTV-KIT788

Lees hieronder de 📖 handleiding in het Nederlandse voor NAV-TV NTV-KIT788 (9 pagina's) in de categorie Dashcam. Deze handleiding was nuttig voor 52 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/9
BHM
12/12/16
NTV-DOC275
Agreement End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for :
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.
1 | P a g e
3950 NW 120th Ave, Coral Springs, FL 33 TEL 561-955-9770 FAX 561-955-9760 065
www.nav-tv.com info@nav-tv.com
AUDI-P60H
NTV-KIT 788
Overview
The Ki interfaces a backup camera input (with acve parking lines 1 addional AUDI-P60H t ),
composite video input and an HDMI source into the factory media screen in the 2017 Audi , A4
Q7, TT or vehicles with the brand new (MIB2) MMI system Installaon is performed behind R8 .
the MMI module (inside glove box).
Kit Contents
Infrared Receiver
OSD Menu Remote
Power/CAN Harness
A-Type
LVDS
Video
Cable
AUDI-P60H Interface
Audio Output Cable
BHM
12/12/16
NTV-DOC275
Agreement End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for :
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.
2 | P a g e
Interface Connectors
Dip Switch Sengs
Dip SW:
2
3
4
5
6
7
8
UP
N/A
N/A
OEM RVC
N/A
N/A
HIGH RES
Keep DOWN
DOWN
N/A
N/A
ADDING RVC
N/A
N/A
LOW RES
Keep DOWN
Power/CAN Harness
Video Expansion Board
Dip Switches
Note: Remove power to the unit prior to
making adjustments to the dip switches
Video OUT
(to screen)
Video IN (from radio)
IR Receiver
RGB IN
HDMI Audio OUT
HDMI Input
Digital RGB (for adding NAV)
BHM
12/12/16
NTV-DOC275
Agreement End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for :
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.
3 | P a g e
AUDI-P60H Installaon
1. Remove the MMI module located in glove box this will require an 8mm socket and –
possibly a right-angle driver. Disconnect any associated
harnesses and set the radio aside.
2. G the provided from the rab ‘Power/CAN Harness’
AUDI-P60H kit. Connect the following wires to the car:
3. Locate the factory Pink (For AUDI’s with NAV, this connector is GRAY) , 4-pin round
connector that was removed from the radio
in step 1. Connect this factory plug to the
AUDI-P60H interface at the port labeled
‘ ’VIDEO OUT .*
4. Connect the smaller white plug
side of the provided LVDS
Video Cable to the port on
the AUDI- interface P60H
labeled ‘ ’VIDEO-IN .
5. Connect the free end of the provided (green) back to the factory radio LVDS Video Cable
at the appropriate port .
Interface wires
Connect to car
Locaon
Black (Ground)
Chassis Ground
PIN 15 (Radio plug)
Red (ACC 12v)
ACC 12v (+)
Black/White or Black/Blue @
pass fuse box


Product specificaties

Merk: NAV-TV
Categorie: Dashcam
Model: NTV-KIT788

Heb je hulp nodig?

Als je hulp nodig hebt met NAV-TV NTV-KIT788 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Dashcam NAV-TV

Handleiding Dashcam

Nieuwste handleidingen voor Dashcam