NAV-TV NTV-KIT457 Handleiding

NAV-TV Dashcam NTV-KIT457

Lees hieronder de đź“– handleiding in het Nederlandse voor NAV-TV NTV-KIT457 (7 pagina's) in de categorie Dashcam. Deze handleiding was nuttig voor 62 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/7
BHM
12/3/13
NTV-DOC 150
Agreement End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for :
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.
1 | P a g e
3950 NW 120th Ave, Coral Springs, FL 33 TEL 561-955-9770 FAX 561-955-9760 065
www.nav-tv.com info@nav-tv.com
MY-CUE-Kit
NTV-KIT 457
Overview
The -CUE Kit allows the user to add up to 3 audio/video inputs and a backup camera input to MY
the factory media screen in select GM vehicles equipped with either the or media MYLINK CUE
systems. This kit has a dedicated rear view camera input, 3 composite (RCA) audio/video inputs,
an RGB input and an AV output with AV switching. Audio integraon requires that the vehicle
have a factory audio input.
Kit Contents
AV Input Harness
Power/CAN Harness
LVDS Video cable
MY-CUE Interface
Remote
RGB Input cable
Input Toggle Switch
IR Eye Harness
BHM
12/3/13
NTV-DOC 150
Agreement End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for :
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.
2 | P a g e
Interface Connectors
Dip Switch Sengs* Congure prior to installaon
Dip SW:
1
2
4
5
6
7
8
UP
Enables
RGB
Enables
V1
Enables
V3
N/A
Leave up
N/A
Leave up
Factory or
no Rev-Cam
N/A
DOWN
Skips
RGB
Skips
V1
Skips
V3
N/A
N/A
Acvates
aermarket
Rev-Cam
N/A
Leave
down
AV IN/OUT
RGB INPUT
Rear Camera Power
Power/CAN
Dip Switches
Status LEDs
*Note: If the dip switches are not conî…±gured prior to
installaon you must remove power to the unit prior to
making adjustments to the dip switches. When power is
reconnected aer the dip switch adjustment the new
sengs will be stored into memory.
LCD IN/OUT
(LVDS Cable)
BHM
12/3/13
NTV-DOC 150
Agreement End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for :
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.
3 | P a g e
Installaon for GM trucks and notes for all other vehicles
THIS INTERFACE INSTALLS AT THE HMI MODULE, AT THE SCREEN! THE HMI MODULE IS A NOT
BLACK PLASTIC BOX SHOWN IN STEP 3 OF THE NEXT PAGE.
1. GM trucks only: Remove the glove box, the HMI module is located behind it (black box
with connectors). Remove (2x) Torx t15 screws:
2. GM trucks only: Underneath the glove box you’ll nd (2x) more addional Torx T15
screws ring upwards. Remove these and pull the glove box free from the dash (all that
remain are clips).
Vehicle
HMI Locaon
Cadillac ATS/CTS
Directly Below glove compartment
Cadillac SRX
Below/behind glove compartment
Corvee
Driver’s kick
GM Truck
Behind glove compartment
This chart will be updated as informaon is provided.


Product specificaties

Merk: NAV-TV
Categorie: Dashcam
Model: NTV-KIT457

Heb je hulp nodig?

Als je hulp nodig hebt met NAV-TV NTV-KIT457 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Dashcam NAV-TV

Handleiding Dashcam

Nieuwste handleidingen voor Dashcam