Motorola Talkabout T280 Handleiding

Motorola Radio Talkabout T280

Lees hieronder de 📖 handleiding in het Nederlandse voor Motorola Talkabout T280 (2 pagina's) in de categorie Radio. Deze handleiding was nuttig voor 36 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

TALKABOUT ® TWO-WAY RADIO

T2XX SERIES

*MN002392A01*

MN002392A01-AA

MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M logo are trademarks

or registered trademarks of Motorola Trademark Holdings, LLC and are used under

license. All other trademarks are the property of their respective owners.

Printed in China

RF Exposure and Product Safety Instructions for

Portable Two-Way Radios General Populated and

Uncontrolled Environments.

ATTENTION:

Before using this radio, refer to the important operating

instructions for safe usage and RF energy awareness and

control for compliance with applicable Standards and

Regulations.

Compliance with RF Exposure Standards

Your Motorola Two-Way radio complies with the following RF

energy exposure standard and guidelines:

• United States Federal Communications Commission,

Code of Federal Regulations; 47 CFR et seq. & FCC.

• Institute of Electrical and Electronic Engineers (IEEE)

C95.1.

• International Commission on Non-Ionizing Radiation

Protection (ICNIRP).

• Ministry of Health (Canada) Safety Code 6 & Industry

Canada RSS-102.

• Australian Communications Authority

Radiocommunications Standard et seq.

• ANATEL ANNEX to Resolution No. 303 of July 2, 2002.

• ANATEL ANNEX to Resolution No. 533 of September 10,

2009.

Transmit and Receive Procedure

Your two-way radio contains a transmitter and a receiver. To

control your exposure and ensure compliance with the general

population/uncontrolled environment exposure limits, always

adhere to the following procedure:

• Transmit no more than 50% of the time.

• To receive calls, release the PTT button.

• To transmit (talk), press the Push-to-Talk (PTT) button in

front of the face.

• Hold the radio in a vertical position with the microphone

(and other parts of the radio including the antenna) at least

one inch (2.5 centimeters) away from the nose or lips.

Keeping the radio at a proper distance is important to

ensure compliance.

Note: RF exposure decreases with increasing distance from the

antenna.

• Body Worn Operation. When worn on the body, always

place the radio in a Motorola-approved clip, holder,

holster, case or body harness for this product.

Please refer to the following websites for more information on

what RF energy exposure is and how to control your exposure

to assure compliance with established RF exposure limits:

• http://www.fcc.gov/oet/rfsafety/rf-faqs.html

• www.who.int/en/

• http://responsibility.motorolasolutions.com/index.php/

downloads/dow07-rfexposureassessmentstand/

Two-way Radio Operation

• Use only Motorola-approved supplied or replacement

antennas, batteries, and audio accessories. Use of non-

Motorola-approved antennas, batteries, and wired or

wireless accessories may exceed the applicable RF

exposure guidelines (iEEE, ICNIRP or FCC).

• For a list of Motorola-approved accessories for your radio

model, visit the following website: http://

www.motorolasolutions.com/TalkaboutAccessories.

Electromagnetic Interference/Compatibility

Note: Nearly every electronic device is susceptible to

electromagnetic interference (EMI) if inadequately

shielded, designed or otherwise configured for

electromagnetic compatibility.

This device complies with part 15 of the FCC Rules. Operation

is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received,

including interference that may cause undesired

operation.

This device complies with Industry Canada licence-exempt RSS

standard(s). Operation is subject to the following two conditions:

1. This device may not cause interference, and

2. This device must accept any interference received,

including interference that may cause undesired operation

of the device.

Facilities

To avoid electromagnetic interference and/or compatibility

conflicts, turn off your radio in any facility where posted notices

instruct you to do so. Hospitals or health care facilities may be

using equipment that is sensitive to external RF energy.

Aircraft

When instructed to do so, turn off your radio when onboard an

aircraft. Any use of a radio must be in accordance with

applicable regulations per airline crew instructions.

Medical Devices – Pacemakers, Defibrillators or other

Implanted Medical Devices

Persons with pacemakers, Implantable cardioverter-

defibrillators (ICDs) or other active implantable medical devices

(AIMD) must:

• Consult with their physicians regarding the potential risk of

interference from radio frequency transmitters, such as

portable radios (poorly shielded medical devices may be

more susceptible to interference).

• Turn the radio OFF immediately if there is any reason to

suspect that interference is taking place.

• Do not carry the radio in a chest pocket or near the

implantation site, and carry or use the radio on the

opposite side of their body from the implantable device to

minimize the potential for interference.

Hearing Aids

Some digital wireless radios may interfere with some hearing

aids. In the event of such interference, you may want to consult

your hearing aid manufacturer to discuss alternatives.

Other Medical Devices

If you use any other personal medical device, consult the

manufacturer of your device to determine if it is adequately

shielded from RF energy. Your physician may be able to assist

you in obtaining this information.

Use of Communication Devices While Driving

Always check the laws and regulations on the use of radios in

the areas where you drive.

• Give full attention to driving and to the road.

• Use hands-free operation, if available.

• Pull off the road and park before making or answering a

call, if driving conditions or regulations so require.

For Vehicle With Air Bags

Refer to the vehicle manufacturer’s manual prior to installation

of electronic equipment to avoid interference with air bag wiring.

Do not place a portable radio in the area over an air bag or in

the air bag deployment area. Air bags inflate with great force. If

a portable radio is placed in the air bag deployment area and the

air bag inflates, the radio may be propelled with great force and

cause serious injury to occupants of the vehicle.

Potentially Explosive Atmosphere

Turn off your radio prior to entering any area with a potentially

explosive atmosphere. Only radio types that are especially

qualified must be used in such areas as “Intrinsically Safe”. Do

not remove, install or charge batteries in such areas. Sparks in a

potentially explosive atmosphere can cause an explosion or fire

resulting in bodily injury or even death.

Note:The areas with potentially explosive atmosphere referred

to above include fueling areas such as below decks on

boats, fuel or chemical transfer or storage facilities, areas

where the air contains chemicals or particles (such as

grain, dust or metal powders) and any other area where

you would normally be advised to turn off your vehicle

engine. Areas with potentially explosive atmospheres are

often – but not always posted.

Blasting Caps and Areas

To avoid possible interference with blasting operations, turn off

your radio when you are near electrical blasting caps, in a

blasting area, or in areas posted “Turn off two-way radios”. Obey

all signs and instructions.

Operational Cautions

Antennas

Do not use any portable radio that has a damaged antenna.

If a damaged antenna comes into contact with your skin, a

minor burn can result.

Batteries

All batteries can cause property damage and/or bodily injury

such as burns if a conductive material touches exposed

terminals. The conductive material may complete an electrical

circuit (short circuit) and become hot.

• Exercise care when removing NiMH or AA batteries. Do

not use sharp or conductive tools to remove these

batteries.

• Exercise care in handling any charged battery, particularly

when placing it inside a pocket, purse or other container

with metal objects.

• Do not discard your battery in a fire.

• Do not replace the battery in any area labeled “Hazardous

Atmosphere”. Any sparks created in a potentially

explosive atmosphere can cause explosion or fire.

• Do not disassemble, crush, puncture, shred or otherwise

attempt to change the form of your battery.

• Do not dry a wet battery or damp battery with an appliance

or heat source, such as a hair dryer or microwave oven.

• If the radio battery contact area has been submerged in

water, dry and clean the battery contacts before attaching

the battery to the radio.

Battery Charger Safety Instructions:

Save these Instructions

1. Turn the radio off when charging the battery.

2. Do not expose the charger to outside environment.

Chargers must only be used indoors.

3. Do not operate or disassemble the charger. Do not use a

charger that has been dropped or damaged in any way.

4. Never alter the AC cord or plug provided with the unit. If

the plug will not fit the outlet, have the proper outlet

installed by a qualified electrician. An improper condit ion

can result in a risk of electric shock.

5. To reduce the risk of damage to the cord or plug, pull the

plug rather than the cord when disconnecting the charger

from the AC receptacle.

6. To reduce the risk of electric shock, unplug the char ger

from the outlet before attempting any maintenance or

cleaning.

7. Use of an attachment not recommended or sold by

Motorola Solutions may result in a risk of fire, electr ic

shock or personal injury.

8. Make sure the cord is located so it will not be stepped on,

tripped over or subjected to damage or stress.

9. An extension cord must not be used unless absolute ly

necessary. Use of an improper extension cord could result

in a risk of a fire and/or electric shock. If an extension cord

must be used, make sure that:

• The pins on the plug of the extension cord are the same

number, size and shape as those on the plug of the

charger.

• The extension cord is properly wired and in good

condition.

• The extension cord size is 18 AWG for lengths up to 100

feet, and 16 AWG for lengths up to 150 feet.

10. The supply cord of the AC adaptor cannot be replaced. If

the cord is damaged, call customer service.

USA

Use of GMRS frequencies is subject to the Rules and

Regulations of the Federal Communications Commission

(FCC).

The FCC requires that all operators using GMRS frequencies

obtain a radio license before operating their equipment. To

obtain the FCC forms, please visit the FCC website at

wireless.fcc.gov/uls/index.htm?job=home to source form 605

and 159, which includes all the instructions you will need.

If you wish to have the document faxed or mailed, or if you have

questions, please use the following contact information:

Canada

Use of Motorola radio in Canada is subject to the rules &

regulations of Industry Canada (IC). IC requires no license when

operated in Canada.

Changes or modifications not expressly approved by Motorola

Solutions may void the user authority granted by the IC/FCC to

operate this radio and must not be made. To comply with IC/

FCC requirements, transmitter adjustments must be made only

by or under the supervision of a person certified as technically

qualified to perform transmitter maintenance and repairs in the

private land mobile and fixed services as certified by an

organization representative of the user of those services.

Replacement of any transmitter component (crystal,

semiconductor, etc) not authorized by the IC/FCC equipment

authorization for this radio could violate IC/FCC rules.

Note: Use of this radio outside the country where it was

intended to be distributed is subject to government

regulations and may be prohibited.

Mexico

Use of GMRS frequencies is subject to the Rules and

Regulations of the Federal Communications Institute (IFT)

requires that all operators using GMRS frequencies obtain a

permit before operating their equipment. To obtain a permit from

the IFT, the user must proceed in accordance with Articles 14

and 15 of the Federal Telecommunications Law. Consult your

local IFT office for more information: www.ift.org.mx

Uruguay

Use of GMRS frequencies is subject to the Rules and

Regulations of the Regulatory Unit Communications Services

(URSEC). URSEC requires that all operators using GMRS

frequencies obtain a permit before operating their equipment.

The authorization shall depend on the channel availability at the

time the authorization is requested. To obtain a permit from

URSEC, consult your local URSEC office for more information:

www.ursec.gub.uy.

Panama

The Republic of Panama does not require authorization to use

FRS/GMRS radio equipment frequencies.

Chile

Servicio de Banda Local UHF frequency use is subject to

SUBTEL Resolution 1.261 and Resolution 52 Exenta. A license

is required for use in Chile. To obtain a Banda Local end-user

license:

1. Fill out the required application form to request Local Band

service.

a. It is available on the SUBTEL website:

http://www.subtel.gob.cl/ index.php?option=com_ content&view

=article&id=1388&Itemid=2087

b. It is also available at the SUBTEL offices:

Subsecretaría de Telecomunicaciones

Unidad de Licencias y Permisos

Lorenzo Gotuzzo N°124, piso 6

Santiago, Chile

Tel. (56-2) 421 3634

2. Present this form with your ID at the above location.

3. Consult the SUBTEL offices for applicable fees.

For more information, consult SUBTEL at www.subtel.cl or call

their offices at the telephone number listed above.

Colombia

Operacion itinerante de baja potencia frequency use is subject

to CRC Resolución 002190 de 2003. No license is required for

use in Colombia. Consult CRC at www.crcom.gov.co for more

information.

Peru

Colectivo Familiar frequency use is subject to MTC RVM

388-200-MTC/15.03 and FCC (FRS), Part 95B. No license is

required for use in Peru. Consult MTC Peru at www.mtc.gob.pe

for more information.

Argentina

Uso Familiar frequency use is subject to CNC Resolution SC

No. 2750/98. No license is required for use in Argentina.

Consult the AFTIC at http://www.aftic.gob.ar/ for more

information.

Brazil

The frequency general use is subject to the Annex to Resolution

506 Section XIV - Radio Communication Equipment General

Purpose. It is not required use license in Brazil. See the

ANATEL site for more information: http://www.anatel.gov.br/

Portal/exibirPortalInternet.do

Installing the Batteries

Discard the retailer tag (loose in one of the battery

compartments), before installing batteries.

Each radio can use either 1 NiMH rechargeable battery pack or

3 AA alkaline batteries and beeps when the batteries are low.

Installing the NiMH Rechargeable Battery Pack

(Optional Accessory)

1. Take the belt clip off.

2. With the back of the radio facing you, lift the battery cover

latch up and remove the cover.

3. Insert the NiMH battery pack by following the instruction

on the battery pack. (The ribbon must be underneath the

battery pack and must wrap around the right side of the

pack for easy removal).

4. Close the battery cover firmly.

Installing the Three AA Alkaline Batteries

1. Take the belt clip off.

2. With the back of the radio facing you, lift the battery cover

latch up and remove the cover.

3. Insert the three AA Alkaline batteries with + and – polarity

as shown inside. (The ribbon must be underneath the AA

alkaline batteries and must wrap around the right side of

the batteries).

4. Close the battery cover firmly.

Radio Battery Meter

The radio battery icon shows the battery charge level, from full

to empty . When the radio has one segment left,

the radio chirps periodically or after releasing the PTT button

(Low Battery Alert).

Removing the NiMH Battery Pack

1. Turn the radio off.

2. With the back of the radio facing you, lift the battery cover

latch up and remove the cover.

3. Remove the NiMH battery pack by pulling the ribbon

attached to the radio.

4. Close the battery cover firmly.

Removing the Three AA Alkaline Batteries

1. Turn the radio off.

2. With the back of the radio facing you, lift the battery cover

latch up and remove the cover.

3. Gently remove each alkaline battery by pulling the ribbon

attached to the radio.

4. Close the battery cover firmly.

Note:

• Exercise care when removing NiMH or AA batteries. Do

not use sharp or conductive tools to remove either of

these batteries.

• Remove the batteries before storing your radio for

extended periods of time. Batteries corrode over time and

may cause permanent damage to your radio.

Battery Capacity Maintenance

1. Charge the NiMH batteries once every 3 months when not

in use.

2. Before placing the radio in storage, remove the battery.

3. Store the NiMH batteries in temperature between -20 °C to

35 °C and in low humidity. Avoid damp conditions and

corrosive materials.

Using the Micro-USB Charger

The micro-USB charger is a handy port that allows you to

conveniently charge your NiMH battery pack.

1. Make sure your radio is turned OFF.

2. Plug the micro-USB cable into the micro-USB charging

port on your radio. Connect the other end of the micro-

USB charger to wall power outlet.

3. An empty battery will be fully charged in 12 hours.

4. The battery meter on LCD will move to indicate the battery

is charging.

Note:

• It is recommended to power OFF your radio while

charging. However, if power is turned on while charging,

you may not be able to transmit a message if the battery is

completely empty. Allow time for the battery to charge to 1

bar before attempting to transmit a message.

• When moving between hot and cold temperatures, do not

charge the NiMH battery pack until the battery

temperature acclimates (usually about 20 minutes).

• For optimal battery life, remove the radio from the charger

within 16 hours. Do not store the radio while connected to

the charger.

Attaching and Removing the Belt Clip

1. Attach the belt clip to the back of the radio until the clip

clicks in place.

2. Attach the belt clip to pocket or belt strap until the clip

clicks in place.

To Remove

1. Push the release tab on top of the belt clip to release the

latch.

2. Pull the belt clip away from the back of the radio.

Turning your Radio On and Off

1. Press and hold on the button to turn your radio ON/

OFF. In the ON position, the radio chirps and briefly shows

all feature icons available on the radio.

2. The display screen then shows the current channel, code

and all features that are enabled. The radio is in

Two-Way mode.

Setting the Volume

Press and hold for three seconds to listen to volume level.

1. First press either or to trigger volume change. You

will see current volume level on screen.

2. Press to increase the volume. Press to decrease

the volume.

3. When the volume reached level 0 the mute icon

appears permanently on screen.

Do not hold the radio close to your ear. If the volume is set to an

uncomfortable level, it could hurt your ear.

To communicate, all radios in your group must be set to the

same channel and Interference Eliminator Code.

1. To talk, press and hold the PTT button. When transmitting,

icon blinks (only on radio with weather

mode feature) and is shown.

2. When you are finished talking, release the PTT button.

3. When receiving, icon blinks (only on radio

with weather mode feature) and is shown.

For maximum clarity, hold the radio one inch away from your

mouth and speak directly into the microphone. Do not cover the

microphone while talking.

Talk Range

Your radio is designed to maximize performance and improve

transmission range. Do not use the radios closer than five feet

apart.

Monitor Button

Pressing and holding for three seconds allows you to listen

to the volume level of the radio when you are not receiving. You

can also press to check for activity on the current channel

before you talk.

Push-to-Talk Timeout Timer

To prevent accidental transmissions and save battery life, the

radio emits a continuous warning tone and stops transmitting if

you press the PTT button for 60 continuous seconds.

Mode Button (Only on Radio with Weather Mode

Feature)

By pressing “mode” button, the user will be seamlessly

switching between two-way and weather mode. When radio is in

two-way mode, will be shown. When radio is in

weather mode, will be shown. Corresponding

setting and information will be shown on the LCD.

Selecting the Channel

Each country model has different number of channels and

frequencies. See the “Channels and Frequencies” table on

overleaf for details.

1. With the radio on, press one time until the channel

number starts to flash.

2. Press or and select an unused or quiet channel.

An extended press of or allows you to scroll

through the channels rapidly.

Safety and General Information

For a fax:

Contact the Fax-On-

Demand system

For mail service:

Call the FCC Forms

Hotline

If you have questions

about the FCC License:

Call the FCC

1-202-418-0177 1-800-418-FORM (3676) 1-888-CALL-FCC

(225-5322)

Licensing Information

Control Buttons

MODE

Push-to-Talk

Power On/Off/

Mode Switch

Call Tone

Screen

Scan/Monitor

Menu/Lock

Accessory Port

Speaker

Micro-USB

Charging Port

Microphone

Display Screen Guide

Numbers for Channel

Numbers for Codes,

Call Tone

Battery Meter

Weather Alert

Lock

Roger Tone

Call Tone

Keypad Tone

Mute

Status (transmit/

receive)

Scan

iVOX / VOX

Getting Started

MODE

Talking and Listening

Menu Options

3. Press the PTT button to save the channel setting and exit

menu or to continue set up.

Selecting the Interference Eliminator Code

Interference Eliminator Codes help minimize interference by

blocking transmissions from unknown sources. Your radio has

121 Interference Eliminator Codes. Codes 1 – 38 are standard

analog codes that appear on other FRS/GMRS radios. Codes

39 – 121 are additional digital codes added for superior

interference protection. 0 is the off position, no analog or digital

codes are enabled.

To set the code for a channel:

1. Press two times until the code starts to flash.

2. Press or to select the code.

3. Press the PTT button to save the code setting and exit

menu or to continue set up.

You can set a different code for each channel using this

procedure. An extended press of or allows you to scroll

through the Interference Code rapidly so you can quickly reach

the code you want.

Note: On a radio that uses Interference Eliminator Codes, the

code must be set to 0 to communicate with radios that do

not have Interference Eliminator Codes. Select 0 for “no

tone, no code” on the display of your radio.

Setting and Transmitting Call Tones

Your radio can transmit different call tones to other radios in

your group so you can alert them that you want to talk. Your

radio has 20 call tones from which to choose.

To set a call tone:

1. Press three times until appears. The current call

tone setting will flash.

2. Press or to change and hear the call tone.

3. Press the PTT button to set the new call tone and exit

menu or to continue set up.

To transmit your call tone to other radios set up to the same

channel and Interference Eliminator Code as your radio, press

Note: Setting the call to OFF disables the call tone feature.

Hands-Free Use Without Accessories ( )

Note: iVOX feature is not available on model T200.

You can use the feature to transmit hands-free without

the need for any headset accessories. Once is turned on,

the radio detects your voice and transmits when you speak into

the internal microphone.

1. Press four times until appears on the display.

The current setting will flash.

2. Press or to select Off or set sensitivity L1, L2 or

L3.

3. Press the PTT button to set and exit menu or to

continue set up.

Hands-Free Use with Accessories ( )

Note: VOX feature is not available on model T200.

You can transmit hands-free more reliable with the use of

optional headset accessories. Once is turned on,

the radio detects your voice and transmits when you speak.

Many accessories (sold separately) are available for your radio.

For more information, visit our website at

www.motorolasolutions.com/TalkaboutAccessories or call

customer service.

1. Plug the accessory into the accessory port. Press

four times until appears on the display. The

current setting will flash.

2. Press or to select Off or set sensitivity L1, L2 or

L3.

3. Press the PTT button to set and exit menu or to

continue set up.

4. Lower the volume before placing the accessory on your

head or in your ear.

5. To turn off , simply remove accessory.

6. When accessory is connected, only accessory

microphone is functional. Pressing PTT on radio will also

allow user to transmit via accessory microphone.

Note: There is a short delay between the time you start talking

and when the radio transmits. There is a short delay

before the transmission is completed.

Setting the Sensitivity Level When in /

Mode

Adjusting the sensitivity level of the radio helps minimize the

possibility of unintended noises triggering a transmission and

helps the radio pick up soft voices.

Keypad Tones

You may enable or disable the speaker key tones. You will hear

the key tone each time a button is pushed.

1. Press five times (four times on model T200) until

appears. The current setting On/Off will flash.

2. Press either or to turn On or Off.

3. Press the PTT button to confirm and exit menu or to

continue set up.

Note: When the key tone feature is off, the following are not

disabled:

• Transmit timeout alert tone

• Call tone

• Low battery alert tone or

• The transmitted talk confirmation tone

Transmitting a Talk Confirmation Tone

You can set your radio to transmit a unique tone when you finish

transmitting. It is like saying “Roger” or “Over” to let others know

you are finished talking.

1. With the radio on, press six times (five times on

model T200) until the appears. The current setting On/

Off flashes.

2. Press or to turn On or Off.

3. Press the PTT button to set and exit menu.

Keypad Lock

To avoid accidentally changing your radio settings:

1. Press and hold until displays.

2. When in lock mode, you can turn the radio on and off,

adjust the volume, receive, transmit, send a call tone and

monitor channels. All other functions are locked.

3. To unlock the radio, press and hold until is no

longer displayed.

Scanning Channels

Use scan to search all channels for transmissions from

unknown parties, to find someone in your group who has

accidentally changed channels or to quickly find unused

channels for your own use.

To start Scanning:

1. Briefly press the key. The scan will appear in the

display and the radio will begin to scroll through the

channel and code combinations.

2. When the radio detects channel activity matching the

channel and code combination, it stops scrolling and you

can hear the transmission.

3. To respond and talk to the person transmitting, press the

PTT button within five seconds after the end of the

transmission.

4. The radio will resume scrolling through the channels five

seconds after the end of any received activity.

5. To stop scanning, briefly press the key.

Scanning Notes:

1. If you press the PTT button while the radio is scrolling

through inactive channels, the transmission will be on the

“home channel”. Scanning will resume five seconds after

the end of your transmission. You may press the key

to stop scanning at any time.

2. If the radio stops on an undesired transmission, you may

immediately resume the scan by briefly pressing or

3. If the radio repeatedly stops on an undesired

transmission, you may temporarily remove that channel

from the scan list by pressing and holding or for

three seconds. You may remove more than one channel in

this way.

4. To restore the removed channel(s) to the scan list, turn the

radio off and then turn back on, or exit and re-enter the

scanning mode by pressing .

5. You cannot remove the home channel from the scan list.

Note: Weather feature is not available on model T200. Weather

feature is available on model T260 designed for use in

USA and Canada.

Your radio can tune in to broadcasts by the United States

National Oceanic and Atmospheric Administration (NOAA)

Weather Radio and Environment Canada Weather Radio.

You can listen to a weather channel (see “Weather Channels

and Frequencies” table for details) or set your radio to alert you

to emergency weather broadcasts that interrupt routine

broadcasts. When you listen to a weather channel, you cannot

use your radio in scan mode or for two-way communications.

Both NOAA and Environment Canada have transmitters located

throughout the United States and Canada, respectively. These

transmitters broadcast watches, forecasts and other information

24 hours a day.

Note: NOAA weather radio stations are assigned to cover

specific areas and service may be limited. Please check

with your local weather office for frequency and details or

visit www.weather.gov/nwr in the US to view the

appropriate transmitter for your area. The use of the

NOAA logo does not provide an endorsement or implied

endorsement by the National Weather Service of NOAA,

nor does the use of the Weatheradio logo provide an

endorsement or implied endorsement by Environment

Canada.

Entering Weather Mode

1. From two-way mode, press to enter weather mode

Setting the Weather Channel

Your radio receives weather frequencies:

1. In weather mode, press one time until weather

channel number flashes.

2. Press or to select the appropriate channel with

good reception in your area.

3. Press the PTT button to set and exit menu or to

continue set up weather alert.

Setting the Weather Alert

Your radio can be set to respond to NOAA Weather Radio

emergency messages. A special alarm tone sounds an alert and

turns on the weather receiver to give you immediate weather

and emergency information.

1. In weather mode press twice until displays.

2. Press or to select On/Off.

3. Press the PTT button or to exit the weather menu set

up.

4. Press to return to two-way mode. If you activate

Weather Alert and return to two-way mode will

display.

Note:When the weather channel is activated, either manually or

after receiving an alert, and no buttons are pressed for 5

minutes, the weather mode will automatically revert back

to two-way mode.

As with two-way radio reception, weather channel reception

depends on how close you are to a transmitter and whether you

are indoors or outdoors. Because weather channels are

transmitted without codes, they may contain static or noise.

Weather Alert will not function while actively transmitting or

receiving in two-way mode.

Weather Channels and Frequencies

USA, Canada, Mexico, Panama, Uruguay

Argentina

Brazil

Chile

Columbia

Peru

MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the

Stylized M logo are trademarks or registered trademarks of

Motorola Trademark Holdings, LLC and are used under license.

All other trademarks are the property of their respective owners.

Consumer Two-Way Radio Products and

Accessories purchased in the USA, Canada,

Mexico, Uruguay, Panama, Brazil, Argentina, Chile,

Peru, and Columbia

What Does this Warranty Cover?

Subject to the exclusions contained below, Motorola Solutions,

Inc. (“Motorola”) warrants the Motorola branded consumer

two-way radios that operate via Family Radio Service or

General Mobile Radio Service (“Products”), the Motorola

branded or certified accessories sold for use with these

Products (“Accessories”) to be free from defects in materials

and workmanship under normal consumer usage for the

period(s) outlined below. This limited warranty is the exclusive

remedy of a consumer, and applies as follows to new Products

and Accessories and purchased by consumers in the United

States or Canada, which are accompanied by this written

warranty:

Who is Covered?

This warranty extends only to the first consumer purchaser, and

is not transferable.

What will MOTOROLA SOLUTIONS, INC. do?

Motorola Solutions, Inc., at its option, will at no charge repair,

replace or refund the purchase price of any Products or

Accessories that do not conform to this warranty. We may use

functionally equivalent reconditioned/ refurbished/ pre-owned or

new Products or Accessories.

What Other Limitations Are There?

Any Implied Warranties, Including Without Limitation

The implied warranties of merchantability and fitness for a

particular purpose, shall be limited to the duration of this limited

warranty, otherwise the repair, replacement, or refund as

provided under this express limited warranty is the exclusive

remedy of the consumers, and is provided in lieu of all other

warranties, express or implied. In no event shall Motorola

Solutions be liable, whether in contract or tort (including

negligence) for damages in excess of the purchase price of the

product or accessory, or for any indirect, incidental, special or

consequential damages of any kind, or loss of revenue or

profits, loss of business, loss of information or other financial

loss arising out of or in connection with the ability or inability to

use the products or accessories to the full extent these

damages may be disclaimed by law.

Some states and jurisdictions do not allow the limitation or

exclusion of incidental or consequential damages, or limitation

on the length of an implied warranty, so the above limitations or

exclusions may not apply to you. This warranty gives you

specific legal rights, and you may also have other rights that

vary from state to state or from one jurisdiction to another.

How to Obtain Warranty Service or Other

Information?

To obtain customer service or information:

USA and Canada

1-800-448-6686.

www.motorolasolutions.com/talkabout

Email us at consumerradio@motorolasolutions.com

Latin America

Toll free:

Argentina 0800-333-3708

Brazil 0800-892-4264

Chile 123-0020-2126

Colombia 01-800-710-2285

Mexico 001-855-241-8253

Panama 001-800-205-3867

Peru 0800-55760

Uruguay 598 – 24001716

Toll or long distance:

Spanish +001-312-725-5372

Portuguese +001.312.725.5373

English +001-312-725-5368

motorolasolutions.com/talkabout/es (Spanish)

motorolasolutions.com/talkabout/pt (Portugese)

For Accessories:

Please call the telephone number designated above for the

Product with which they are used.

You will receive instructions on how to ship the Products or

Accessories at your expense, to Motorola or a Motorola

Authorized Repair Center. To obtain service, you must include:

(a) a copy of your receipt, bill of sale or other comparable proof

of purchase; (b) a written description of the problem; (c) the

name of your service provider, if applicable; (d) the name and

location of the installation facility (if applicable) and, most

importantly; (e) your address and telephone number.

For more information, please visit us at:

L3 = High Sensitivity for quiet environments

L2 = Medium Sensitivity for most environments

L1 = Low Sensitivity for noisy environments

Special Features

Weather Receiver

Weather Channel Frequency Weather Channel Frequency

WX1 162.550 MHz WX7 162.525 MHz

WX2 162.400 MHz WX8 161.650 MHz

WX3 162.475 MHz WX9 161.775 MHz

WX4 162.425 MHz WX10 161.750 MHz

WX5 162.450 MHz WX11 162.000 MHz

WX6 162.500 MHz

Channel Frequency Description Channel Frequency Description

1 462.5625 MHz GMRS/FRS 12 467.6625 MHz FRS

2 462.5875 MHz GMRS/FRS 13 467.6875 MHz FRS

3 462.6125 MHz GMRS/FRS 14 467.7125 MHz FRS

4 462.6375 MHz GMRS/FRS 15 462.5500 MHz GMRS

5 462.6625 MHz GMRS/FRS 16 462.5750 MHz GMRS

6 462.6875 MHz GMRS/FRS 17 462.6000 MHz GMRS

7 462.7125 MHz GMRS/FRS 18 462.6250 MHz GMRS

8 467.5625 MHz FRS 19 462.6500 MHz GMRS

9 467.5875 MHz FRS 20 462.6750 MHz GMRS

10 467.6125 MHz FRS 21 462.7000 MHz GMRS

11 467.6375 MHz FRS 22 462.7250 MHz GMRS

Channel Frequency

1 462.5625 MHz

2 462.5875 MHz

3 462.6125 MHz

4 462.6375 MHz

5 462.6625 MHz

6 462.6875 MHz

7 462.7125 MHz

MODE

Channels and Frequencies

Channel Frequency Channel Frequency

1 462.5625 MHz 14 467.5675 MHz

2 462.5750 MHz 15 467.5750 MHz

3 462.5875 MHz 16 467.5875 MHz

4 462.6000 MHz 17 467.6000 MHz

5 462.6125 MHz 18 467.6125 MHz

6 462.6250 MHz 19 467.6250 MHz

7 462.6375 MHz 20 467.6375 MHz

8 462.6500 MHz 21 467.6500 MHz

9 462.6625 MHz 22 467.6625 MHz

10 462.6750 MHz 23 467.6750 MHz

11 462.6875 MHz 24 467.6875 MHz

12 462.7000 MHz 25 467.7000 MHz

13 462.7125 MHz 26 467.7125 MHz

Channel Frequency Channel Frequency

1 462.5500 MHz 18 467.6000 MHz

2 462.5625 MHz 19 467.6250 MHz

3 462.5750 MHz 20 467.6500 MHz

4 462.5875 MHz 21 467.6750 MHz

5 462.6000 MHz 22 467.7000 MHz

6 462.6125 MHz 23 467.7250 MHz

7 462.6250 MHz 24 467.8125 MHz

8 462.6375 MHz 25 467.8250 MHz

9 462.6500 MHz 26 467.8375 MHz

10 462.6625 MHz 27 467.8500 MHz

11 462.6750 MHz 28 467.8625 MHz

12 462.6875 MHz 29 467.8750 MHz

13 462.7000 MHz 30 467.8875 MHz

14 462.7125 MHz 31 467.9000 MHz

15 462.7250 MHz 32 467.9150 MHz

16 467.5500 MHz 33 467.9250 MHz

17 467.5750 MHz

Channel Frequency Channel Frequency

1 462.5625 MHz 10 467.6125 MHz

2 462.5875 MHz 11 467.6375 MHz

3 462.6125 MHz 12 467.6625 MHz

4 462.6375 MHz 13 467.6875 MHz

5 462.6625 MHz 14 467.7125 MHz

6 462.6875 MHz 15 467.7625 MHz

7 462.7125 MHz 16 467.8125 MHz

8 467.5625 MHz 17 467.8375 MHz

9 467.5875 MHz 18 467.9125 MHz

Channel Frequency Channel Frequency

1 462.5625 MHz 8 467.5625 MHz

2 462.5875 MHz 9 467.5875 MHz

3 462.6125 MHz 10 467.6125 MHz

4 462.6375 MHz 11 467.6375 MHz

5 462.6625 MHz 12 467.6625 MHz

6 462.6875 MHz 13 467.6875 MHz

7 462.7125 MHz 14 467.7125 MHz

Patent and Copyright Information

Warranty

Products Covered Length Of Coverage

Products and

Accessories

as defined above, unless

otherwise provided for

below: One (1) year from the date of

purchase by the first consumer

purchaser of the product unless

otherwise provided for below.

Batteries

whose fully charged

capacity falls below 80% of

their rated capacity and

batteries that leak

Products and

Accessories

that are repaired or

replaced

The balance of the original

warranty or for ninety (90) days

from the date returned to the

consumer, whichever is longer.

Exclusions From Warranty Coverage

Normal Wear and Tear:

Periodic maintenance, repair and replacement of Products or

Accessories due to normal wear and tear.

Abuse & Misuse:

Defects or damage that result from: (a) improper operation,

storage, misuse or abuse, accident or neglect, such as

physical damage (cracks, scratches, etc.) to the surface of the

Products and Accessories resulting from misuse; (b) contact

with liquid, water, rain, extreme humidity or heavy perspiration,

sand, dirt or the like, extreme heat, or food; (c) use of the

Products or Accessories for commercial purposes or

subjecting the Product or Accessory to abnormal usage or

conditions; or (d) other acts which are not the fault of Motorola.

Use of Non-Motorola branded Products and Accessories:

Defects or damage that result from the use of Non-Motorola

branded or certified products, accessories, software or other

peripheral equipment.

Unauthorized Service or Modification:

Defects or damages resulting from service, testing,

adjustment, installation, maintenance, alteration, or

modification in any way by someone other than Motorola or its

authorized service centers.

Altered Products:

Products or Accessories with (a) serial numbers or date tags

that have been removed, altered or obliterated; (b) broken

seals or that show evidence of tampering; (c) mismatched

board serial numbers; or (d) nonconforming or non-Motorola

branded housings, or parts.

Communication Services:

Defects, damages, or the failure of Products or Accessories

due to any communication service or signal you may subscribe

to or use with the Products or Accessories.

https://www.facebook.com/

MotorolaTalkaboutWalkieTalkies

http://bit.ly/Talkabout

www.motorolasolutions.com/talkabout

www.motorolasolutions.com/talkabout/pt

(Portuguese)

www.motorolasolutions.com/talkabout/es

(Spanish)

Product specificaties

Merk:	Motorola
Categorie:	Radio
Model:	Talkabout T280

Heb je hulp nodig?

Als je hulp nodig hebt met Motorola Talkabout T280 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Radio Motorola

Motorola APX 8000XE Handleiding

24 September 2024

Motorola APX 8000HXE Handleiding

15 Maart 2024

Motorola MOTOTRBO R2 Handleiding

22 Februari 2024

Motorola MOTOTRBO R7 Handleiding

22 Februari 2024

Motorola MOTOTRBO Ion Handleiding

22 Februari 2024

Motorola Talkabout T270 Handleiding

16 Mei 2023

Motorola Talkabout T465 Handleiding

11 Mei 2023

Motorola Talkabout T280 Handleiding

9 Mei 2023

Motorola Talkabout T605 Handleiding

5 Mei 2023

Motorola Talkabout T260 Handleiding

3 Mei 2023

Handleiding Radio

Nieuwste handleidingen voor Radio

Ferguson Regent i450S Handleiding

17 November 2024

Berker 30847003 Handleiding

17 November 2024

Berker 30807003 Handleiding

17 November 2024

Berker 30847006 Handleiding

17 November 2024

Berker 29848989 Handleiding

17 November 2024

Berker 30849909 Handleiding

17 November 2024

Berker 30846086 Handleiding

17 November 2024

Berker 29849909 Handleiding

17 November 2024

Berker 30841404 Handleiding

17 November 2024

Berker 29847009 Handleiding

17 November 2024