Mimo Monitors MWB-7-MCT Handleiding

Mimo Monitors Niet gecategoriseerd MWB-7-MCT

Lees hieronder de 📖 handleiding in het Nederlandse voor Mimo Monitors MWB-7-MCT (5 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 37 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/5

7”, 10.1” and 15.6” Tablet and 10.1” Vue

Wall Box Installation Manual

MWB-7-MCT/MWB-10-MCT/MWB-156-MCT/MWB-10-VUE/ MWB-10-BSBI

Specically designed to t

our products seamlessly.

Parts (Before beginning, make sure you have all parts shown below)

A (1)

in-wall box

B (4)

Mounting Plate

E (2)

Screws

F (2)

Screws

D (2)

Drywall Clips

C (2)

Front Bezel

Parts List

ytQnoitpircseD

Axob llaw-ni

BTablet/Display Mounting Plate

CFront Bezel

DDry Wall Clips (Installed)

EDry Wall Clip Screws (Installed)

FM4 x 6mm Screws

Tools

1-1

Use Stud Finder to locate and

mark edge of studs.

1-2a

Using dimensions shown, draw outline for in-wall box. Make sure lines are level before removing drywall.

1-3

The Mimo Monitor In-Wall Enclosure is designed to fit between studs in the vertical or horizontal direction. The 15.6"

In-Wall Box in landscape mode will not fit between two 16" studs unless the studs are notched, see 1-2b below for

details. So, it is advised to locate the studs in the area you are planning on installing the enclosure before you cut the

drywall so you do not expose a stud by accident. Once you have located the studs on the left and right of where you

are going to install the enclosure, cut the necessary hole in the drywall where you want the enclosure installed. Use

the chart below to determine the size of the hole needed for the enclosure you are installing.

Insert wall box into hole in drywall with the clips on

the inside of the box.

Drywall Hole Size to Cut

Landscape Mode

1-2b

When installing the 15.6" Wall Box in landscape mode in a 16" on center stud wall, both studs will have to be notched

out .875" (half of the 1.5" stud) by 11" (the height of the box) in order for the box to fit.

Product specificaties

Merk:	Mimo Monitors
Categorie:	Niet gecategoriseerd
Model:	MWB-7-MCT
Kleur van het product:	Zwart
Gewicht:	1270.06 g
Breedte:	228 mm
Diepte:	76.25 mm
Hoogte:	160.2 mm
Gebruikershandleiding:	Ja
Aantal per verpakking:	1 stuk(s)
Compatibiliteit:	Mimo Monitors MCT-70QDS / MCT-70QDS-POE
Maximale schermgrootte:	7 "