Middle Atlantic IQBP-2 Handleiding

Middle Atlantic Processorkoeler IQBP-2

Lees hieronder de 📖 handleiding in het Nederlandse voor Middle Atlantic IQBP-2 (4 pagina's) in de categorie Processorkoeler. Deze handleiding was nuttig voor 12 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

I-00509 Rev A

Thank you for purchasing the QBP Series Quiet Blower Panel. Please read these instructions thoroughly

before installing/operating this product

PRODUCT FEATURES

- Quiet even at full speed: proportional speed assures the quietest operation possible

- Low power consumption: blower only runs as needed and spins as fast as required by the heat

load presented

- Proprietary blowers provide high static pressure to maintain airflow even in crowded racks. Superior

to axial fans for maintaining airflow in restricted conditions

- Attractive appearance complements finished rack appearance

- 100 CFM free air rating

(International Models)

(C)

(D)

(B)

(A)

(G)

A) CONTROL CIRCUIT VENT: Allows for air flow to the control circuit. DO NOT BLOCK!

B) TURN ON TEMPERATURE: The blowers will turn on at 87° F (30.5° C) and run proportionately from

87° F (30.5° C) to 95° (35° C). At 95° F and above , the blowers will run at full speed. The blowers will

stop running at 85° F (29.4° C).

C) PRODUCT REVISION: Current revision of your QBP series model.

D) MANUFACTURING DATE CODE: Denotes the date the QBP series models was manufactured.

E) TEMPERATURE PROBE: Temperature detection probe, nine feet long.

F) POWER CONNECTOR: Connects to the provided power supply.

G) POWER LED: Blue LED that illuminates when the unit is receiving power.

FRONT VIEW

BOTTOM VIEW

(ONLY ONE FAN HAS THE TEMPERATURE

PROBE AND POWER CONNECTOR AS SHOWN)

PRODUCT CALLOUTS

(F)

(E)

Page 2

1) Install the QBP series model directly above heat producing equipment. Run the temperature probe to

the heat source. Plug the power supply into the power source and into the unit. (FIGURE A)

1) Install the QBP series model with the blower intakes facing the top of the rack. Ensure there is a vent

panel installed at the bottom of the rack to allow for air flow (or equivalent venting). Mount the

temperature probe at the highest available location in the rack. Plug the power supply into the power

source and into the unit. (FIGURE B)

APPLICATIONS

(FIGURE A)

(FIGURE B)

VENT PANEL

For thermal management guidelines visit our web site to view our thermal management white paper

http://www.middleatlantic.com/pdf/ThermalManagement.pdf

Page 3

REMOVING HEAT FROM A POPULATED RACK

REMOVING HEAT FROM A SINGLE COMPONENT

IN IONTER ATN AL M ELS Y: OD ONL S t te l g for yelec appropria wal plu ou regior n.

Product specificaties

Merk:	Middle Atlantic
Categorie:	Processorkoeler
Model:	IQBP-2
Kleur van het product:	Zwart
Breedte:	483 mm
Diepte:	257 mm
Hoogte:	44 mm
Soort:	Ventilatieplateau
Stroombron:	DC
Stroom:	0.84 A
Inclusief AC-adapter:	Ja
Ingebouwde ventilator:	Ja
Duurzaamheidscertificaten:	RoHS
Luchtstroom:	168 m³/uur
Aantal per verpakking:	1 stuk(s)
Ingangsspanning:	220 V
Aantal ventilatoren:	2 ventilator(en)
Spanning:	12 V
Rackcapaciteit:	1U
Code geharmoniseerd systeem (HS):	85389099
Compatibele rackbreedte:	19 "