MetroVac Air Force Master Blaster MB-3CDSWB-30220 Handleiding

MetroVac Stofzuiger Air Force Master Blaster MB-3CDSWB-30220

Lees hieronder de đź“– handleiding in het Nederlandse voor MetroVac Air Force Master Blaster MB-3CDSWB-30220 (4 pagina's) in de categorie Stofzuiger. Deze handleiding was nuttig voor 3 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/4
Master Blaster Series
ALL MODELS ARE: All Steel Construction; Black Matte Finish; Two 4.0 Peak HP Twin Fan Motor; 18
Amps; 2280 Watts; Air Volume (CFM/ . FPM): 229/58500; 12’ Grounded 3 Conductor Cord
ACCESSORIES: Large Blower Nozzle, Air Flare & Adapter.
Different models and what they come with:
MB-3 (114-141488): Pet Dryer: 2 Speed; 10 ft. Commercial Hose; Crevice Tool; Stationary Wheels.
MB-3V (114-142454): Pet Dryer: Variable Speed; 10 ft. Commercial Hose; Crevice Tool; Stationary
Wheels.
MB-3CD (103-141709): Car Dryer: 2 Speed; 10 ft. Commercial Hose; Crevice Tool; Inflator Adapter;
Stationary Wheels.
MB-3CDSWB (103-103066): Car Dryer: 2 Speed; 10 ft. Commercial Hose; Crevice Too; Inflator Adapter;
Wall Mount Bracket; Hose Hanger; Swivel Wheels.
MB-3-CDSWB-30 (103-142690): Car Dryer: 2 Speed; 30 ft. Commercial Hose; Crevice Too; Inflator
Adapter; Wall Mount Bracket; Hose Hanger; Swivel Wheels. (Model Shown)
MB-3INDWB (110-578598): Industrial Dryer: 10 ft. Commercial Hose; Wall Mount Backet; Stationary
Wheels.
INSTRUCTIONS (Instructions are general for all MB-3 Models. Some of the below information may
not pertain to your specific model. Check list above for parts and accessories that go with your particular
machine):
• Insert the grounded Power Supply Cord into a grounded outlet.
o IMPORTANT: THE PRODUCT MUST BE GROUNDED.
o WARNING: INPROPER CONNECTION OF THE EQUIPMENT GROUNDING
CONDUCTOR CAN RESULT IN A RISK OF ELECTRIC SHOCK!
• Fit the hose over the steel tube protruding from the front-end cap of the power unit. Tighten the
adjustable clamp to keep the hose securely on the dryer.
• Start the blower:
o 1-Speed: Push the On/Off Switch from left to right.
o Variable: Turn knob from low, clockwise to high.
o ***If you are only using one motor at a time, alternate use of each as to wear the
carbon brushes evenly***.
• Attach or remove the attachments to or from the hose to control the air velocity.
CAUTION: If your machine has suction but does not clean when the hose is attached, remove the
hose from the suction end and place it on the blower end. Blow out the hose, it may be clogged.
ADDITIONAL PARTS FOR PURCHASE (the below items are available for purchase on our website
www.MetroVac.com; use the provided product # in the search):
• MetroVac Vac Pac for Master Blaster -VACPAC –MB
• Foam Filters MVC 56F – –
• Hoses:
o 10’ Hose – MVC- 56D
o 30’ Hose For Blaster – – – MVC 56MB 30
• Carbon Brushes ABC–3
• Mounting Bracket MVC- –331
• Adapter Cuff MVC-184 –
• Heavy Duty Blower Nozzle MVC-195AA –
• “Airflare” Utility Nozzle – MVC-195AB
• Motorcycle Dryer 5-Piece Attachment Kit BCK-5 –
• Soft Pack Carry All Bag MVC- –420G
• Switches (you cannot replace a variable speed switch with a one speed switch or vice versa):
o 1 Speed: MVC- 74
o Variable Speed: MVC- -OHM 46A
• Motor MVC-157D –
• Sealing Gasket MVC 155A –
Replacing carbon brushes (ABC-3: should be changed after about 500 hours of use):
1. The front motor needs to be removed to access the back motor.
a. Long Phillips and long flathead are needed to remove the rear motor’s carbon brushes.
2. Remove front endcap.
3. Find wire going to carbon brush and use flathead screwdriver to loosen tab.
4. Use Philips screwdriver to remove carbon brush mounting bracket.
5. Install tab into new carbon brush and replace mounting bracket.
Replacing / Cleaning Filter (Filter MVC-56F):
1. Pull out filter from backend and replace with new or shake out.
a. You can rinse the filter and reuse, BUT IT MUST BE COMPLETELY DRY BEFORE
PUTTING BACK INTO THE MACHINE.
b. Replace it with a new filter after 3 rinses.
Mounting to the wall: Your Master Blaster can be mounted to a wall with the wall mount bracket. Mollies
should be used to secure mounting bracket when attaching to sheet rock. Ideally, one of the screws should
go into a wall stud. Level wall mount bracket in desired position and mark screw location with pencil within
screw holes. Once bracket is securely mounted, the Master Blaster can be hung by the wheel axle located
on the Intake side of the Master Blaster Wall Mount Bracket.
WARRANTY:
This machine carries a Five Year Limited* Warranty.
The Five Year Warranty includes the unit and the motor.*
There is also a on Parts, Switches, and Cords. One Year Warranty*
This warranty covers any defects in materials or workmanship, including installation, with the exceptions
stated below:
• *MetroVac will repair or replace any defective or malfunctioning part* at no charge. If the machine
is not repairable, it will be replaced.
• *Mechanical alterations made to the machine will void the warranty.
• *Warranty does not cover carbon brushes, carbon brush wear, filters, or general maintenance.
• *The warranty does not cover physical damage made to the machine from tampering with or
attempting to take the appliance apart, improper electrical connections, or water damage.
*Customer is responsible for shipping charges to and from our facility.
***Even if the product is beyond the warranty period, we suggest you send the unit back to our
factory for expert repairs and maintenance at reasonable rates. Please click the following link to
access our Repairs and Maintenance form***
WARNING: To reduce the risk of fire, electric shock, or injury Do not leave appliance when plugged
in. Unplug from outlet when not in use and before servicing.
• Do not allow it to be used as a toy. Close attention is necessary when used by or near children.
• Use only as described in this manual. Use only manufacturer's recommended attachments.
• Do not use it with damaged cord or plug. If appliance is not working as it should, has been
dropped, damaged, left outdoors, or dropped into water, return it to a service center.
• Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp
edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces.
• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
• Do not handle plug or appliance with wet hands.

Product specificaties

Merk: MetroVac
Categorie: Stofzuiger
Model: Air Force Master Blaster MB-3CDSWB-30220

Heb je hulp nodig?

Als je hulp nodig hebt met MetroVac Air Force Master Blaster MB-3CDSWB-30220 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Stofzuiger MetroVac

MetroVac

MetroVac Air Force Master Blaster MB-3INDWB Handleiding

16 December 2024
MetroVac

MetroVac DataVac ED-500-ESDV Handleiding

16 December 2024
MetroVac

MetroVac MagicAir DIDA-2 Handleiding

16 December 2024
MetroVac

MetroVac Air Force Master Blaster MB-3CDSWB-30220 Handleiding

16 December 2024
MetroVac

MetroVac Vac 'N Blo VNB-83BA Handleiding

16 December 2024
MetroVac

MetroVac DataVac MDV-1ESD Handleiding

16 December 2024
MetroVac

MetroVac Air Force Speed Handleiding

10 December 2024
MetroVac

MetroVac Vac N Blo VNB-94BD Handleiding

10 December 2024
MetroVac

MetroVac MagicAir DIDA-4 Handleiding

9 December 2024
MetroVac

MetroVac Vac 'N' Blo HRS-83BA Handleiding

9 December 2024

Handleiding Stofzuiger

Nieuwste handleidingen voor Stofzuiger

Girmi

Girmi AP45 Handleiding

17 December 2024
Girmi

Girmi AP74 Handleiding

17 December 2024
Girmi

Girmi AP23 Handleiding

17 December 2024
Pontec

Pontec PondoMatic Handleiding

16 December 2024
Maytronics

Maytronics Dolphin Wave 90i Handleiding

16 December 2024
Mitsubishi

Mitsubishi TC-GXG10P Handleiding

14 December 2024
Midea

Midea M7 Pro Handleiding

14 December 2024
Zelmer

Zelmer Jancio ZVC1400WD Handleiding

14 December 2024
Hyundai

Hyundai VC011 Handleiding

14 December 2024
Cecotec

Cecotec Conga Rockstar Multicyclonic XL Handleiding

12 December 2024