Metra MPS-DSPL-BT Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Metra MPS-DSPL-BT (16 pagina's) in de categorie Audio/video-converter. Deze handleiding was nuttig voor 29 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16
MPS-DPSL-BT
I N S T A L L A T I O N I N S T R U C T I O N S
MetraPowerSports.com © COPYRIGHT 2020 METRA ELECTRONICS CORPORATION REV. 9/24/20 INSTMPS-DPSL-BT
Google Play Store Apple App Store
iOS 12.1 or higher
INTERFACE FEATURES
INTERFACE COMPONENTS
TOOLS & INSTALLATION ACCESSORIES REQUIRED
• Crimping tool and connectors, or solder gun,
solder, and heat shrink • Tape • Wire cutter
• Zip ties • Multimeter
TABLE OF CONTENTS
Preface ....................................................................2
Installing bluetooth board ....................................3
Pinout .....................................................................4
Installation .............................................................5
Stand-alone bluetooth diagram ..........................6
Quick setup guide ..............................................7-12
Advanced DSP features & control options .....13-14
Other installation options ....................................15
Specifications ....................................................... 16
Marine & Powersports Bluetooth Streaming
Audio Interface w/ DSP Controls
No Source Needed.
15 Band graphic EQ
Bluetooth streaming from your smart device
4 inputs and 6 outputs, including front, rear, and subwoofer
Independent equalization for front, rear, and sub
Independent crossover for front, rear, and sub
Selectable slope (12, 24, 36, or 48db per octave)
Front and rear channels can be delayed independently up to 10ms
Water resistant enclosure with zip tie mounts included
Clipping detection and limiting circuits
Bluetooth interface module included
Volume knob & Bass knob included
Settings adjusted via Bluetooth® in a smart device application (tablet
or mobile phone), compatible with both Android and Apple devices
Read, write, and store configurations for future recall
Password protect feature available in the mobile app
Micro-B USB updatable
• MPS-DSPL-BT circuit board
• Bluetooth streaming audio circuit board
• Volume and Subwoofer knobs
• MPS-DPSL-BT harness (16-pin & 20-pin, with gaskets)
• MPS-DPSL-BT enclosure
• Case
• Cap (with O-ring)
2
PREFACE
The MPS-DSPL-BT is designed for UTV, Marine and Motorcycle applications when a source is not required. The interface includes the AXDSPL-BT Bluetooth Streaming circuit board. This
board plugs directly into the DSP’s circuit board and will allow your phone or tablet to stream music directly to your aftermarket amplifiers. The MPS-DSP-BT is housed in a water tight
case making it perfect for ON/OFF road vehicles that are exposed to the elements. We recommend matching the MPS-DSPL-BT with our MPS-RZKIT for 2014-2020 Polaris RZR.
The MPS-DSPL-BT provides 6 outputs that are assignable to match your systems requirements. Outputs are commonly assigned as Front, Rear, and Subwoofer, which are all setup
through the free Axxess AX-DSP-XL application. Included with interface are two separate knobs that are used as an overall system volume control and a subwoofer’s volume control.
The interface provides a 12-volt 1-amp output to turn on aftermarket amp(s). If installing multiple amps, an SPDT automotive relay will be required if the amp turn-on current of all
amps combined exceeds 1-amp. Use Metra part number E-123 (sold separately) for best results.
3
REV. 9/24/2020 INSTMPS-DPSL-BT
INSTALLING BLUETOOTH BOARD
16-Pin Header
AX-DSPL-BT
AX-DSPL-BT
The AXDSPL-BT Bluetooth interface will be used for adding a Bluetooth interface to the
MPS-DPSL-BT for playing music from your smart device.
While playing music the volume can be controlled from your streaming device or from
the included volume knob.
1. Make sure the 16 pin and 20 pin plugs are disconnected from the Important!
circuit board before installing the ASDSPL-BT.
2. Locate the 16-pin header on the circuit board.
3. Important! Referencing how the Bluetooth interface is laid out in the picture,
carefully line up the header pins to the AXDSPL-BT Bluetooth interface. Gently
press down to secure.
Volume Knob Installation:
Connect the Brown wire (Volume Control Wire) from the MPS-DPSL-BT harness, to the
Orange wire from the volume knob you want controlling the overall volume of your
system. The black wire from your volume control will need to be grounded. Tapping
into the ground wire from the MPS-DSPL-BT harness is recommended.
Subwoofer Knob installation
Connect the Orange wire from the MPS-DSPL-BT Orange harness, to the wire from
the bass knob. The black wire from your volume control will need to be grounded.
Tapping into the ground wire from the MPS-DSPL-BT harness is recommended.


Product specificaties

Merk: Metra
Categorie: Audio/video-converter
Model: MPS-DSPL-BT

Heb je hulp nodig?

Als je hulp nodig hebt met Metra MPS-DSPL-BT stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Audio/video-converter Metra

Handleiding Audio/video-converter

Nieuwste handleidingen voor Audio/video-converter