Metra AXDSPL-VW1 Handleiding

Metra Audio/video-converter AXDSPL-VW1

Lees hieronder de šŸ“– handleiding in het Nederlandse voor Metra AXDSPL-VW1 (13 pagina's) in de categorie Audio/video-converter. Deze handleiding was nuttig voor 44 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/13
AXDSPL-VW1
I N S T A L L A T I O N I N S T R U C T I O N S
AxxessInterfaces.com Ā© COPYRIGHT 2020 METRA ELECTRONICS CORPORATION REV. 8/3/20 INSTAXDSPL-VW1
Google Play Store Apple App Store
iOS 12.1 or higher
INTERFACE FEATURES
INTERFACE COMPONENTS
TOOLS & INSTALLATION ACCESSORIES REQUIRED
ā€¢ Crimping tool and connectors, or solder gun,
solder, and heat shrink ā€¢ Tape ā€¢ Wire cutter
ā€¢ Zip ties ā€¢ Multimeter
TABLE OF CONTENTS
Installation Options ...............................................2
Installation .............................................................2
Connections ........................................................3-4
AXDSPL-BT Installation...........................................5
AXDSPL-SP Installation...........................................6
Mobile App .........................................................7-15
Speciļ¬cations ....................................................... 16
Volkswagen ā€  DSP Interface With Pre-Wired
Harness 2011-2014
ā€¢ Includes a DSP (Digital Signal Processor)
ā€¢ 15 Band graphic EQ
ā€¢ 6 outputs including front, rear, and subwoofer
ā€¢ Independent equalization for front, rear, and sub
ā€¢ Selectable low pass, band pass, and high pass ļ¬lters
ā€¢ Selectable crossover slopes; 12db, 24db, 36db, 48db
ā€¢ Each channel can be delayed independently up to 10ms
ā€¢ Clipping detection and limiting circuits
ā€¢ Designed for non-ampliļ¬ed models
ā€¢ Easy behind the radio installation with pre-wired harness
ā€¢ Internal header port for adding interface modules
ā€¢ Bass knob included for level control of subwoofer amp
ā€¢ Settings adjusted via BluetoothĀ® in a smart device application (tablet
or mobile phone), compatible with both Android and Apple devices
ā€¢ Read, write, and store conļ¬gurations for future recall
ā€¢ Password protect feature available in the mobile app
ā€¢ Micro-B USB updatable
ā€¢ AXDSPL-VW1 interface
ā€¢ AXDSPL-VW1 interface harness
ā€¢ AXDSPL-VW1 vehicle T-harness ā€¢ Bass knob
APPLICATIONS
Visit axxessinterfaces.com for current application list
ā€  Excluding models equipped with a Fender sound system
2
Adding a sub to a factory system:
This feature offers the ability to add a subwoofer to a factory system. (refer to page 3)
Adding a full-range amp & sub to a factory system:
This feature offers the ability to add a full-range amp and sub to a factory system. (refer to page 4)
16-pin header port:
Inside the interface is a 16-pin header port for adding optional modules (sold separately). Page 5
and 6 will show the installation and use of these modules.
ā€¢ AXDSPL-BT - Bluetooth streaming interface
ā€¢ AXDSPL-SP - Toslink digital output
Note: The interface provides a 12-volt 1-amp output to turn on aftermarket amp(s). If installing
multiple amps, an SPDT automotive relay will be required if the amp turn-on current of all amps
combined exceeds 1-amp. Use Metra part number E-123 (sold separately) for best results.
1. Remove the factory radio ā€ , then unplug all connectors.
2. Install the AXDSPL-VW1 vehicle T-harness to the vehicle and make all necessary
connections, but leave the amp turn-on wire disconnected.
3. AXDSPL-VW1 vehicle T-harness AXDSPL-VW1 interface Plug the to the .
4. Plug the AXDSPL-VW1 interface harness AXDSPL-VW1 interface to the .
5.
Download and install the AX-DSP-X app Google Play Store Apple App Store from the or
.
6.
Cycle the ignition on.
7. Open the app then select the Bluetooth Connection tab. Follow the instructions to
pair the mobile device to the interface. Refer to page 6 for more information.
8. Conļ¬guration Scroll to the tab then select the vehicle type. Press the ā€” Lock Down
button to save the conļ¬guration. Refer to page 7 for more information.
9. Connect the amp turn-on wire.
10. Adjust the settings in the app as desired. Press the ā€” button to save any Lock Down
new conļ¬gurations.
ā€  Refer to Metra online for dash disassembly. If Metra makes a dash kit for the vehicle,
disassembly will be within those instructions.
ā€” Anytime the interface is locked down the key must be cycled off then back on
INSTALLATION OPTIONS INSTALLATION
3
REV. 8/3/2020 INSTAXDSPL-VW1
Factory Radio
These outputs can be used for
additional sub amps, or for adding
onto the em at a later datesyst
6
5
4
3
2
1
RCA Jacks
(sold separately)
K deep Connecte
Any remaining wires
tape off and disregard
Black - Ground
Orange - Control
Bass Knob
Factory Radio Harness
Interface
Any remaining wires
tape off and disregard
Vehicle T-Harness
Blue/White - Amp Turn-On Wire
Interface Harness
ADDING A SUB TO A FACTORY SYSTEM

Product specificaties

Merk: Metra
Categorie: Audio/video-converter
Model: AXDSPL-VW1

Heb je hulp nodig?

Als je hulp nodig hebt met Metra AXDSPL-VW1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Audio/video-converter Metra

Metra

Metra AXDSPL-VW1 Handleiding

27 Juni 2023
Metra

Metra MPS-DSPL-BT Handleiding

26 Juni 2023
Metra

Metra AXDSPL-HN3 Handleiding

23 Juni 2023
Metra

Metra AXDSPX-GL44 Handleiding

23 Juni 2023
Metra

Metra AX-DSPH-HN2 Handleiding

22 Juni 2023

Handleiding Audio/video-converter

Nieuwste handleidingen voor Audio/video-converter

Smart-AVI

Smart-AVI V2V-C2H-01 Handleiding

21 December 2024
Smart-AVI

Smart-AVI V2V-H2V-01 Handleiding

21 December 2024
Smart-AVI

Smart-AVI V2V-AV2HV Handleiding

21 December 2024
Smart-AVI

Smart-AVI V2V-MAX 3 Handleiding

21 December 2024
Thor

Thor F-M1SDI-3G-TX/RX Handleiding

10 December 2024
Thor

Thor F-M1SDI-TX/RX Handleiding

10 December 2024
Ocean Matrix

Ocean Matrix OMX-HDMI-2-IP Handleiding

10 December 2024
Ocean Matrix

Ocean Matrix OMX-HDMI-2-IP-T Handleiding

10 December 2024
Decimator

Decimator DMON-4S Handleiding

10 December 2024
Decimator

Decimator MD-HX Handleiding

10 December 2024