Metra AX-DSPH-HN2 Handleiding

Metra Audio/video-converter AX-DSPH-HN2

Lees hieronder de 📖 handleiding in het Nederlandse voor Metra AX-DSPH-HN2 (8 pagina's) in de categorie Audio/video-converter. Deze handleiding was nuttig voor 49 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/8

AXDSPH-HN2

I N S TA L L AT I O N I N S T R U C T I O N S

ATTENTION: With the key out of the ignition,

disconnect the negative battery terminal

before installing this product. Ensure that all

installation connections, especially the air

bag indicator lights, are plugged in before

reconnecting the battery or cycling the

ignition to test this product.

NOTE: Refer also to the instructions included

with the aftermarket accessory before

installing this device.

TABLE OF CONTENTS

Installation Options ...............................................2

Installation .............................................................2

20-Pin Harness Pinout...........................................3

Adding A Subwoofer To A Factory System...........4

Adding A Full-Range Amp and

Subwoofer To A Factory System ........................5

AX-DSP T-Harness

The Axxess T-harness is a basic and simple plug-n-play harness for

easy installation of the AXDSP-X AXDSP-L or (sold separately) for

vehicle speciﬁc applications. Most T-harnesses created by Axxess

will have an 8-pin harness, with the speaker wires pinned. If you are

installing a 4-channel ampliﬁer with one of the AXDSP interfaces,

leave these connectors disconnected. The only reason for connecting

these harnesses together would be if the AXDSP interface is being

used for adding a subwoofer ampliﬁer only. Some T-harnesses

require additional wiring and/or installation steps, see page 2.

Refer to page 3 for a pinout legend for the 20-pin harness, and also

additional wiring and notes.

APPLICATIONS

Visit AxxessInterfaces.com for more detailed

information about the product and

up-to-date vehicle speciﬁc applications.

Visit Metraonline.com AxxessInterfaces.com or

for harness and interface options.

Visit

AxxessInterfaces.com

for current application list.

Adding a subwoofer to a factory system:

The diagram on shows the connections that need to be made to add a subwoofer to the Page 4

factory system.

Note: RCA jacks sold separately.

Adding a full-range of amps and subwoofer to a factory system:

The diagram on shows the connections that need to be made to add: Subwoofer (RCA jacks Page 5

sold separately)

Ampliﬁer (SPDT relay E-123 required) or

Additional Amp (RCA jacks sold separately).

Note: The interface provides a 12-volt 1-amp output to turn on aftermarket amp(s). If installing

multiple amps, an SPDT automotive relay will be required if the amp turn-on current of all amps

combined exceeds 1-amp. Use Metra part number E-123 (sold separately) for best results.

1. Disassemble the dash, unplug all connectors, and then remove the factory radio.†

2. Install the AXDSPH-HN2 vehicle T-harness to the vehicle and make all necessary

connections, but leave the amp turn-on wire disconnected.

3. AXDSPH-HN2 vehicle T-harness AXDSPH-HN2 interface Plug the to the .

4. Plug the AXDSPH-HN2 interface harness to the AXDSPH-HN2 interface.

5. AXDSP-XL app Download the from the Google Play Store or Apple App store.

6. Refer to the AXDSP-X AXDSP-L or for tuning instructions.

† For dash disassembly instructions, refer to metraonline.com. Enter the year, make,

and model of the vehicle in the Vehicle Fit Guide and ﬁnd instructions under Metra

Radio Install kits.

INSTALLATION OPTIONS INSTALLATION

REV. 8/12/22 INSTAXDSPH-HN2

20-PIN HARNESS PINOUT

Pin-1 Accessory PowerRed

Pin-2 Brown Not Applicable

Pin-3 CAN-HI (CAN +)Pink

Pin-4 Black/Yellow Future Use

Pin-5 Front Left Speaker (-)White/Black

Pin-6 Gray/Black

Front Right Speaker (-)

Pin-7 Rear Left Speaker (-)Green/Black

Pin-8 Purple/Black

Rear Right Speaker (-)

Pin-9 RCA Input 5 (-)

Pin-10 RCA Input 6 (-)

Pin-11 Yellow Battery Power

Pin-12 Control Wire for the AX-BASSKNOBOrange

Pin-13 CAN-LO (CAN -)Blue/Pink

Pin-14 GroundBlack

Pin-15 Front Left Speaker (+)White

Pin-16 Front Right Speaker (+)Grey

Pin-17 Rear Left Speaker (+)Green

Pin-18 Rear Right Speaker (+)Purple

Pin-19 RCA Input 5 (+)

Pin-20 RCA Input 6 (+)

Wire View of Harness

Product specificaties

Merk:	Metra
Categorie:	Audio/video-converter
Model:	AX-DSPH-HN2

Heb je hulp nodig?

Als je hulp nodig hebt met Metra AX-DSPH-HN2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Audio/video-converter Metra

Metra AXDSPL-VW1 Handleiding

27 Juni 2023

Metra MPS-DSPL-BT Handleiding

26 Juni 2023

Metra AXDSPL-HN3 Handleiding

23 Juni 2023

Metra AXDSPX-GL44 Handleiding

23 Juni 2023

Metra AX-DSPH-HN2 Handleiding

22 Juni 2023

Handleiding Audio/video-converter

Nieuwste handleidingen voor Audio/video-converter

Smart-AVI V2V-SDHD-S Handleiding

20 November 2024

SWIT S-4600 Handleiding

19 November 2024

DataVideo PP-ONE D Handleiding

16 November 2024

Jung MAGCR1102 Handleiding

14 November 2024

Digitus DN-82212 Handleiding

13 November 2024

Digitus DA-70473 Handleiding

13 November 2024

Digitus DS-45333 Handleiding

13 November 2024

Digitus DS-45334 Handleiding

13 November 2024

Digitus DA-70466 Handleiding

13 November 2024

Digitus DS-45338 Handleiding

13 November 2024