McIntosh MPC500 Handleiding


Lees hieronder de đź“– handleiding in het Nederlandse voor McIntosh MPC500 (20 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 37 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/20
McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 www.mcintoshlabs.com
MPC500
Power Controller
Owner’s Manual
2
Copyright 2019 © by McIntosh Laboratory, Inc.
Table of Contents
Thank You
Please Take A Moment
Technical Assistance
If at any time you have questions about your McIn-
tosh products, contact your McIntosh Dealer who is
familiar with your McIntosh equipment and any other
brands that may be part of your system. If you or your
Dealer need additional help concerning a suspected
problem, you can receive technical assistance for all
McIntosh products at:
McIntosh Laboratory, Inc.
2 Chambers Street
Binghamton, New York 13903
Phone: 607-723-3512
Fax: 607-724-0549
Customer Service
If it is determined that your McIntosh product is in
need of repair, you can return it to your Dealer. You
can also return it to the McIntosh Laboratory Service
Department. For assistance on factory repair return
procedure, contact the McIntosh Service Department
at:
McIntosh Laboratory, Inc.
2 Chambers Street
Binghamton, New York 13903
Phone: 607-723-3515
Fax: 607-723-1917
The serial number, purchase date and McIntosh Dealer
name are important to you for possible insurance
claim or future service. The spaces below have been
provided for you to record that information:
Serial Number: _______________________________
Purchase Date: _______________________________
Dealer Name: ________________________________
Important Safety Information is supplied in a separate document “Important Additional Operation Information Guide”
Safety Instructions ..................................................... 2
(Separate Sheet) ................... Important Additional
Operation Information Guide
Thank You and Please Take a Moment 2 .......................
Technical Assistance and Customer Service 2 ..............
Table of Contents 2 ........................................................
General Information ................................................... 2
Connector and Cable Information ..............................3
Introduction .................................................................3
Performance Features .................................................4
Dimensions .................................................................5
Installation ..................................................................6
Rear Panel Connections (100V-120V) ........................7
How to Connect for 100V-120V 8 ..................................
Rear Panel Connections (220V-240V) ........................9
How to Connect for 220V-240V ............................... 10
Front Panel Displays and Controls ............................ 12
How to Operate ....................................................13-15
Photos ................................................................... 16-17
Specifications ............................................................ 18
Packing Instruction ................................................... 19
1. For additional connection information, refer to the
Owner’s Manual(s) for component(s) connected to
the MPC500.
2. McIntosh MPC500 Products are marketed world
wide. There are two different versions of the
MPC500 Components. Each of the different ver-
sions of MPC500 have different AC Outlet Connec-
tors and operate with either 100Volts to 120Volts
or 220Volts to 240Volts. This MPC500 Owner’s
Manual contains information about both versions
of the MPC500 to meet the different AC Power and
Safety Requirements for use in your country.
3. The Main AC Power going to the MPC500 and any
other McIntosh Component(s) should not be applied
until all the system components are connected
together. Failure to do so could result in malfunc-
tioning of some or all of the system’s normal opera-
tions.
4. The MPC500 is designed for connection with Au-
dio/Video Components. This would include compo-
nents such as Preamplifiers, A/V Control Centers,
Source Components, Integrated Amplifiers and
Power Amplifiers with low to modest power output.
5. The total amount of current drawn by all the
components connected to the MPC500 should not
exceed the Current Amperage Rating indicated on
the rear panel of your MPC500. Typically, compo-
nents consuming low amounts of energy are rated
in wattage instead of current. Refer to the MPC500
Versions chart on the next page for converting a
wattage rating into an approximate current rating.
6. Caution: Verify the protective earthing connection
of socket-outlet for the plug of AC input
power cord by a Skilled person.
General Information
Your decision to own this McIntosh MPC500 Power
Controller ranks you at the very top among discrimi-
nating music listeners with the desire to protect your
audio components. You now have “The Best.” The
McIntosh dedication to “Quality,” is assurance that
you will receive many years of enjoyment from this
unit.
Please take time to read the information in this man-
ual. We want you to be as familiar as possible with all
the features and functions of your new McIntosh.
3
following information includes the eight pin connector
Socket and the Ethernet Connection Cable.
Ethernet RJ45 Socket
1. Transmit Data (+) 5. N/C
2. Transmit Data (-) 6. Receive Data (-)
3. Receive Data (+) 7. N/C
4. N/C 8. N/C
Ethernet Cable - Straight Thru Connections
Pin Number - Wire Color Pin Number - Wire Color
1. Orange/White → 1. Orange/White
2. Orange → 2. Orange
3. Green/White → 3. Green/White
4. Blue → 4. Blue
5. Blue/White → 5. Blue/White
6. Green → 6. Green
7. Brown/White → 7. Brown/White
8. Brown → 8. Brown
Antenna “F” Connector
ANTenna IN, connects to the Cable Company Signal.
The ANTenna OUT, connects to a FM Tuner Connec-
tor.
RS232 Data Port Cable
The RS232 Data Cable has 3.5mm stereo mini
phone plug at both ends of the
cable. Some Source Component
Products use a sub miniature
DB9 Connector on their rear
panels. Therefore, connecting
from those Source Components
requires an adaptor cable with a
3.5mm Stereo Mini Phone Plug
on one end to a DB9 Connector
on the other end of the cable.
Those type of cables are available from various retail
stores that sell Computer Cables.
Ethernet Network Cable
The Ethernet Data Cable is for the connection of Data
Signal from an Outside Data Network Source to vari-
ous Audio/Video System Components. The Ethernet
RJ45 Socket has eight electrical connections of which
includes Receiving Data and Transmitting Data. The
Connector and Cable Information
Connector and Cable Information
Data In
(DB9-pin2)
Ground
(DB9-pin5)
Data Out
(DB9-pin3)
PIN 1
PIN 6
PIN 5
PIN 9
DB9
(male connector)
Data Signal
GroundCoaxial
Shielded
Cable
“F” Connector
MPC500 Versions
120VAC 230VAC
Watts Rating
on component
Approximate
current
Approximate
current
0- 50 Watts 0.5A 0.25A
51-100 Watts 1A 0.5A
101-150 Watts 1.5A 0.75A
151-200 Watts 2A 1A
201-250 Watts 2.5A 1.25A
7. For additional information on the MPC500 and
other McIntosh Products please visit the McIntosh
Website at www.mcintoshlabs.com.
Pin 1
Pin 8
Pin 1
Pin 8


Product specificaties

Merk: McIntosh
Categorie: Niet gecategoriseerd
Model: MPC500

Heb je hulp nodig?

Als je hulp nodig hebt met McIntosh MPC500 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd McIntosh

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd