Maytag MDB4949SD Handleiding

Maytag Vaatwasser MDB4949SD

Lees hieronder de đź“– handleiding in het Nederlandse voor Maytag MDB4949SD (76 pagina's) in de categorie Vaatwasser. Deze handleiding was nuttig voor 76 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/76
INSTALLATION INSTRUCTIONS
UNDERCOUNTER DISHWASHER
STAINLESS STEEL TUB
LAVAVAJILLAS EMPOTRADA CON TINA
DE ACERO INOXIDABLE
INSTRUCTIONS D’INSTALLATION
LAVE-VAISSELLE ENCASTRÉ
AVEC CUVE EN ACIER INOXYDABLE
Table of Contents .............................................................. 2
Indice ..............................................................................25
Table des matières .......................................................... 50
W10741197A
2
TABLE OF CONTENTS
DISHWASHER SAFETY............................................................................... 2
INSTALLATION REQUIREMENTS .............................................................3
Tools and Parts......................................................................................... 3
Location Requirements.............................................................................4
Drain Requirements .................................................................................. 6
Water Supply Requirements.....................................................................6
Electrical Requirements............................................................................6
INSTALLATION INSTRUCTIONS ...............................................................7
Prepare Cabinet Opening—
Existing Utilities.........................................................................................7
Prepare Cabinet Opening—New Utilities.................................................7
Prepare and Route Water Line ................................................................. 8
Install Drain Hose...................................................................................... 9
Install Optional Moisture Barrier ............................................................. 11
Prepare Dishwasher................................................................................12
Make Power Cord Connection............................................................... 13
Determine Cabinet Opening................................................................... 14
Install Door Handle ................................................................................. 15
Custom Panel Installation....................................................................... 16
Choose Attachment Option.................................................................... 16
Prepare Water Supply Line..................................................................... 17
Move Dishwasher Close to Cabinet Opening........................................ 17
Connect to Water Supply....................................................................... 19
Connect to Drain..................................................................................... 19
Make Direct Wire Electrical Connection................................................. 20
Secure Dishwasher in Cabinet Opening ................................................ 22
Complete Installation.............................................................................. 23
Check Operation..................................................................................... 24
If Dishwasher Does Not Operate............................................................ 24
Additional Tips ........................................................................................ 24
DISHWASHER SAFETY
You Need to:
â– Slowly open dishwasher door while someone grasps the rear
of the dishwasher. Remove shipping materials and drain hose.
Close dishwasher door until latched.
NOTE: Each dishwasher is tested at the factory and may contain
some residual water in the tub as a result of the test.
â– Observe all governing codes and ordinances.
â– Install this dishwasher as specified in these instructions.
â– Installation should be performed by a qualified service
technician.
â– The dishwasher must be installed to meet all electrical and
plumbing national and local codes and ordinances.
Care shall be exercised when the appliance is installed or
removed, to reduce the likelihood of damage to the power cord.
WARNING: To reduce the risk of electric shock, fire, or injury to
persons, the installer must ensure that the dishwasher is
completely enclosed at the time of installation.
You can be killed or seriously injured if you don't immediately
You can be killed or seriously injured if you don't follow
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
follow instructions.
instructions.
DANGER
WARNING
WARNING
Tip Over Hazard
Do not use dishwasher until completely installed.
Do not push down on open door.
Doing so can result in serious injury or cuts.
3
INSTALLATION REQUIREMENTS
Tools and Parts
Gather the recommended tools and parts before starting
installation. Read and follow the instructions provided with any
tools listed here.
All Installations
Tools Needed:
Other Useful Items You May Need:
Parts Supplied:
Make sure all these parts are included in the literature package.
If parts are not included, call 1-800-422-1230. In Canada, call
1-800-807-6777.
Other Parts Needed: (not provided)
Optional Accessory Parts Available:
First-time Installations:
Check local codes. Check existing electrical supply. See the
“Electrical Requirements” section. It is recommended that
electrical connections be made by a licensed electrical installer.
Additional Tools Needed:
Additional Parts Needed (not provided)
NOTE: If using a flexible braided hose, replace inlet hose after
5 years to reduce the risk of hose failure. Record hose installation
or replacement dates on the hose for future reference.
†®TORX, T15, and T20 are registered trademarks of
Acument Intellectual Properties, LLC.
.


Product specificaties

Merk: Maytag
Categorie: Vaatwasser
Model: MDB4949SD

Heb je hulp nodig?

Als je hulp nodig hebt met Maytag MDB4949SD stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Vaatwasser Maytag

Handleiding Vaatwasser

Nieuwste handleidingen voor Vaatwasser

Smeg

Smeg STP522 Handleiding

21 November 2024
Smeg

Smeg STL825B-2 Handleiding

21 November 2024
Smeg

Smeg ST5121 Handleiding

21 November 2024
Smeg

Smeg ST3337L Handleiding

21 November 2024
Smeg

Smeg ST3328L Handleiding

21 November 2024
Smeg

Smeg LVS433PXIT Handleiding

21 November 2024
Smeg

Smeg LVS322PXIT Handleiding

21 November 2024
Smeg

Smeg STLA825B-2 Handleiding

21 November 2024
Smeg

Smeg PL5335N Handleiding

21 November 2024