Master MAC-36-DCT-BDF Handleiding

Master Ventilator MAC-36-DCT-BDF

Lees hieronder de 📖 handleiding in het Nederlandse voor Master MAC-36-DCT-BDF (12 pagina's) in de categorie Ventilator. Deze handleiding was nuttig voor 13 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/12

IMPORTANT:

Read and understand all of the instructions in this manual before assembling,

starting, or

servicing the fan. Improper use of this fan can cause serious injury. Keep this manual for future reference.

For general ventilating use only. Do not use to exhaust hazardous or

explosive materials and vapors.

Never use the fan in spaces which con-

tain products such as gasoline, solvents,

paint thinners, dust particles,

volatile or airborne combustibles, or any unknown chemicals.

Model Numbers:

MAC-12F, MAC-20F, MAC-20FOMNI, MAC-24DCT, MAC-30BCT, MAC-36-DCT-BDF

CONSUMER: READ AND SAVE THESE INSTRUCTIONS

CAUTION

THIS IS A FAN - NOT A TOY! TO REDUCE THE RISK OF PERSONAL

INJURY AND ELECTRIC SHOCK, FANS SHOULD NOT BE

PLAYED

WITH OR PLACED WHERE SMALL CHILDREN CAN REACH IT.

To guard against electric shock while operating, do not allow fan to come in

contact with other grounded objects such as pipes, radiators, etc.

Risk of fire, electric shock, or personal injury when performing ser-

vice or maintenance. Unplug or disconnect the fan from the power

supply before servicing.

CAUTION: Automatically operated device - to reduce the risk of

injury disconnect from power source before servicing.

To reduce the risk of fire or electric shock, do not use this fan with

any solid- state speed control device.

Safety Information

WARNING

To Reduce The Risk Of Electric Shock And Injury To Persons, Do

Not Use In a Window.

Do not operate any fan with a damaged cord or plug. Discard fan or

return to an authorized service facility for examination and/or repair.

Do not run cord under carpeting. Do not cover cord with throw rugs,

runner, or similar coverings. Do not route cord under furniture or appliances. Arrange cord

away from traffic areas and where it will not be tripped over.

WARNING

(

86&

Sauk Rapids, MN 56379 USA • Toll Free (800) 641-6996

Fax: 320-251-2922 • Web: www.masterindustrialproducts.com • Email: info@pinnacleclimate.com

User’s Manual &

Operating Instructions

HIGH VELOCITY

FAN

WARNING: This product can expose you to chemicals including lead,

which is known to the State of California to cause cancer and birth

defects or other reproductive harm. For more information go to

www.P65Warnings.ca.gov.

NEVER LEAVE A FAN UNATTENDED WHILE OPERATING

OR WHILE CONNECTED TO A POWER SOURCE

- Before operating always check fan for loose

or damaged parts. Inspect power cord for any

damage. Never use fan if any parts are

damaged or missing. Never use fan without

safety guards attached.

- Operate only on 120 volt 60 Hz (cycle) current

with a minimum of a 15 amp circuit.

- When used with an extension cord, use only a

cord of proper size (Amp rating), UL listed, and

with receptacle to accept three prong grounded

plug furnished on the fan’s power cord. Always

keep power cord and extension cords away

from heat, oil, and sharp edges. Inspect cords

periodically and replace if damaged.

Installation work and electrical wiring must be done by qualified

person(s) in accordance with all applicable codes and regulations.

When servicing or replacing a component requires the removal or

disconnection of a safety device, the safety device is to be

reinstalled or

remounted as previously installed before operating this fan.

Use this fan only in the manner intended by the manufacturer

. If you have

any questions, contact Customer Service at 800-641-6996.

WARNING

12"/20" Floor Fan

20F

(

86&

30BCT

(

86&

20" Omni Floor Fan

20FOMNI

24" Barrel Fan

24DCT

30" Floor Fan

(

86&

(

86&

36" Cradle Fan

(

86&

36DCT-BDF

12F

To Reduce The Risk Of Electric Shock, Do Not Expose To Water Or Rain

This unit is designed for indoor use only.

WARNING

NEVER LEAVE A FAN UNATTENDED WHILE OPERATING

OR WHILE CONNECTED TO A POWER SOURCE

Installation and Assembly

1. Place the fan on level ground in a safe,

desired position then connect to an approved

power source.

NOTE: This model CAN NOT be wall mounted.

12", 20", 30 FLOOR FANS / 24", 36 BARREL FANS" "

30" FLOOR FAN 30BCT

Exploded View (30BCT Only)

This 30" Floor Fan

(30BCT) is approved for

use with California’s BAR-

97 Emissions Inspection

System and meets all

BAR-97 (EIS) required

specications and standards

Exploded View (24DCT Only)

24" BARREL FAN

Product specificaties

Merk:	Master
Categorie:	Ventilator
Model:	MAC-36-DCT-BDF

Heb je hulp nodig?

Als je hulp nodig hebt met Master MAC-36-DCT-BDF stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Ventilator Master

Master MHD-24P Handleiding

6 September 2024

Master MAC-24W Handleiding

6 September 2024

Master MAC-30WOSC Handleiding

6 September 2024

Master MAC-36-DCT-BDF Handleiding

6 September 2024

Master MAC-30P Handleiding

6 September 2024

Master MAC-700-DR Handleiding

4 September 2024

Master MAC-24POSC Handleiding

4 September 2024

Master MAC-121CDP Handleiding

4 September 2024

Master DF 36 P Handleiding

13 Januari 2024

Master DF 30 P Handleiding

15 April 2023

Handleiding Ventilator

Nieuwste handleidingen voor Ventilator

Aerian MISTY100 Handleiding

17 November 2024

Tornado HI-FAN-24HVWM-1P Handleiding

17 November 2024

Tornado HI-FAN-24PF-1P Handleiding

17 November 2024

Tornado HI-FAN-24MOWF-A-1P Handleiding

17 November 2024

Tornado HI-FAN-20HVWM-A-1P Handleiding

17 November 2024

Tornado HI-FAN-20WMPRO-1P Handleiding

17 November 2024

Tornado HI-FAN-24MOWF-WR-1P Handleiding

17 November 2024

Tornado HI-FAN-30HVOF-1P Handleiding

17 November 2024

Tornado HI-FAN-30POF-WR-1P Handleiding

17 November 2024

Tornado HI-FAN-20POF-5BA-1P Handleiding

17 November 2024