Luxul XMS-5248P Handleiding

Luxul Schakelaar XMS-5248P

Lees hieronder de 📖 handleiding in het Nederlandse voor Luxul XMS-5248P (8 pagina's) in de categorie Schakelaar. Deze handleiding was nuttig voor 7 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/8

READ ME FIRST

QUICK INSTALL GUIDE

52-Port Gigabit PoE+

L2/L3 Managed Switch

XMS-5248P

Includes:

52-Port PoE Switch

Rack Mount Kit

Rubber Feet

Power Cord

INSTALLATION AND SETUP

Physical Installation

The XMS-5248P can easily be installed in a standard 19” rack. Two mounting ears

are included for installing and stabilizing the switch. When attaching the mounting

ears and installing the switch in a rack, please refer to the following illustration:

Rack-Mounting the XMS-5248P

 Using the included screws to attach the mounting ears to each side

of the switch.

 Mount the switch in the rack with the LEDs facing outwards. Be sure the

switch is level and properly secured in the rack.

Desktop Setup

For use as a desktop device, position and apply the included rubber feet to the

bottom of the XMS-5248P.

2Connecting Ethernet and Power

Ethernet and Power Connections

Use one of the 50 Ethernet ports to connect the XMS-5248P to any Ethernet-

enabled device, including servers, routers or other switches.

No crossover cable is necessary.

The XMS-5248P supports 10/100/1000 Mbps Ethernet; 10/100 Mbps half/

full-duplex mode and 1000 Mbps full-duplex mode. Ports 1-48 are PoE+ and

are enabled by default. Ports 49 and 50 are Gigabit Ethernet only (non PoE).

Use the included power cable to connect the XMS-5248P to a surge-

protected outlet. The AC input socket is on the rear panel. The built-in

power supply supports 100~240VAC at 50/60Hz.

The rear panel also features a redundant power supply (RPS) connector. To

utlize this feature, you’ll need an external power supply and an appropriate

RPS cable to connect the XMS-5248P to the external power supply.

Network Cabling

Luxul recommends at least Cat-5e unshielded twisted pair (CAT5e UTP)

cabling. To ensure best performance and stable data transmission at 1000

Mbps, use Category-6 unshielded twisted pair (CAT6 UTP).

cCAUTION: Multiple Uplink channels can create loops, resulting in

network failure. Ensure only one Uplink channel exists

between switches or between the XMS-5248P and a router.

nNOTE: When powering up, the port LEDs may take a moment to

initialize. This is normal as the XMS-5248P initialization and

startup sequence completes.

nNOTE: The XMS-5248P has an internal 740W power supply. Do not

exceed 25.5W each or 740W combined consumption of all

external PoE devices.

Product specificaties

Merk:	Luxul
Categorie:	Schakelaar
Model:	XMS-5248P
Kleur van het product:	Zwart
Gewicht:	4900 g
Breedte:	442 mm
Diepte:	375 mm
Hoogte:	44.5 mm
LED-indicatoren:	Activity, Link, Power, System
Meegeleverde kabels:	AC
Snelstartgids:	Ja
Vermogensverbruik (max):	992 W
Certificering:	FCC, CE, RoHS
Ethernet LAN, data-overdrachtsnelheden:	10,100,1000 Mbit/s
Netwerkstandaard:	IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Rack-montage:	Ja
Redundante voeding:	Ja
Vermogenstoevoer inclusief:	Nee
Quality of Service (QoS):	Ja
VLAN=ondersteuning:	Ja
Power over Ethernet (PoE):	Ja
Switchingcapaciteit:	- Gbit/s
MAC-adrestabel:	- entries
10G support:	Nee
Aantal VLANs:	4094
Switch type:	Managed
Aantal basis-switching RJ-45 Ethernet-poorten:	52
Aantal Gigabit Ethernet (koper)-poorten:	52
Netstekker:	AC-in-aansluiting
Switch-laag:	L2/L3
Type basis-switching RJ-45 Ethernet-poorten:	Gigabit Ethernet (10/100/1000)
Full duplex:	Ja
AC-ingangsspanning:	100 - 240 V
AC-ingangsfrequentie:	50 - 60 Hz
Bedrijfstemperatuur (T-T):	0 - 40 °C
Relatieve vochtigheid in bedrijf (V-V):	10 - 90 procent
Totaal Power over Ethernet (PoE)-budget:	740 W
Aantal Power over Ethernet plus (PoE +)-poorten:	48
Ondersteundende kabel types:	Cat5, Cat5e, Cat6
Vezel-optische connector:	SFP
Rekbevestigingspakket:	Ja
Fibre channel-poorten:	2
Aantal wachtrijen:	4
Algoritmen wachtrijplanning:	Priority queuing (PQ), Weighted Round Robin (WRR)
Type Power over Ethernet (PoE) ondersteunt:	PoE+