Hikvision DS-XS10G-P Handleiding
Hikvision
Schakelaar
DS-XS10G-P
Lees hieronder de 📖 handleiding in het Nederlandse voor Hikvision DS-XS10G-P (4 pagina's) in de categorie Schakelaar. Deze handleiding was nuttig voor 2 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/4

Switch
Quick Start Guide
About
About
About
AboutAbout this
this
this
thisthis Document
Document
Document
DocumentDocument
●This Document includes instructions for using and managing the Product.
Pictures, charts, images and all other information hereinafter are for
description and explanation only.
●The information contained in the Document is subject to change, without
notice, due to firmware updates or other reasons. Please find the latest
version of the Document at the Hikvision website (https://
www.hikvision.com). Unless otherwise agreed, Hangzhou Hikvision Digital
Technology Co., Ltd. or its affiliates (hereinafter referred to as "Hikvision")
makes no warranties, express or implied.
●Please use the Document with the guidance and assistance of professionals
trained in supporting the Product.
About
About
About
AboutAbout this
this
this
thisthis Product
Product
Product
ProductProduct
This product can only enjoy the after-sales service support in the country or
region where the purchase is made.
Acknowledgment
Acknowledgment
Acknowledgment
AcknowledgmentAcknowledgment of
of
of
ofof Intellectual
Intellectual
Intellectual
IntellectualIntellectual Property
Property
Property
PropertyProperty Rights
Rights
Rights
RightsRights
●Hikvision owns the copyrights and/or patents related to the technology
embodied in the Products described in this Document, which may include
licenses obtained from third parties.
●Any part of the Document, including text, pictures, graphics, etc., belongs
to Hikvision. No part of this Document may be excerpted, copied, translated,
or modified in whole or in part by any means without written permission.
●and other Hikvision’s trademarks and logos are the
properties of Hikvision in various jurisdictions.
●Other trademarks and logos mentioned are the properties of their respective
owners.
LEGAL
LEGAL
LEGAL
LEGALLEGAL DISCLAIMER
DISCLAIMER
DISCLAIMER
DISCLAIMERDISCLAIMER
●TOTHE MAXIMUMEXTENTPERMITTED BY APPLICABLELAW, THISDOCUMENT
AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND
FIRMWARE, ARE PROVIDED "AS IS" AND "WITH ALL FAULTS AND ERRORS".
HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR
FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU
IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU
FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES,
INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS,
BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS,
OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT,
TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN
CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
●YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR
INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY
RESPONSIBILITIES FORABNORMAL OPERATION,PRIVACY LEAKAGE OROTHER
DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS
INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION
WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
●YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE
LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR
USECONFORMSTOTHEAPPLICABLELAW.ESPECIALLY,YOUARERESPONSIBLE,
FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON
THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS
OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION
AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR
ANYPROHIBITEDEND-USES,INCLUDINGTHEDEVELOPMENTORPRODUCTION
OF WEAPONS OF MASS DESTRUCTION, THEDEVELOPMENT ORPRODUCTION
OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT
RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE,
OR IN SUPPORT OF HUMAN RIGHTS ABUSES.
●IN THE EVENT OF ANY CONFLICTS BETWEEN THIS DOCUMENT AND THE
APPLICABLE LAW, THE LATTER PREVAILS.
©
©
©
©
©Hangzhou
Hangzhou
Hangzhou
HangzhouHangzhou Hikvision
Hikvision
Hikvision
HikvisionHikvision Digital
Digital
Digital
DigitalDigital Technology
Technology
Technology
TechnologyTechnology Co.,
Co.,
Co.,
Co.,Co., Ltd.
Ltd.
Ltd.
Ltd.Ltd. All
All
All
AllAll rights
rights
rights
rightsrights reserved.
reserved.
reserved.
reserved.reserved.
Legal Information
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Provides additional information to emphasize or
supplement important points of the maintext.
Indicates a hazard with a high level of risk, which if not
avoided, will result in deathor serious injury.
Symbol
Symbol
Symbol
Symbol
Symbol Description
Description
Description
DescriptionDescription
Indicates a potentially hazardous situation, which if not
avoided, could result in equipment damage, data loss,
performance degradation, or unexpected results.
Applicable Models
This manual is applicable to switches.
Preface
UD38879B-A
① Learn About Your Switch
①② ③ ④ ⑤
▷Front Panel (Example)
* Device appearances vary with models. The front and rear panels
below are only provided as an example. The actual device prevails.
▷Rear Panel (Example)
Red port (or VIP port),
used to preferentially
ensure network
transmission in key
service areas.
SFP Fiber Optical Port
Gigabit SFP fiber optical port,
used for connection to another
device via an optical fiber when
the port is plugged into with an
optical module.
10/100 Mbps or gigabit RJ45
port, used for connection to
another device via a network
cable.
RJ45 Port
10/100 Mbps or gigabit PoE
RJ45 port, used for connection
to a powered device(PD) via a
network cable.
PoE RJ45 Port High-Priority Port
Ports
LINK/ACT Indicator
• Solid on: The switch supplies power to a PD normally.
• Unlit: The switch is disconnected from a PD or power supply is abnormal.
PoE Indicator
• Solid on: The port is connected.
• Flashing: The port is transmitting data.
• Unlit: The port is disconnected or connection is abnormal.
• Solid on: The output power of the switch is about to reach or has reached the upper limit.
The power supply may be abnormal if more devices are connected.
• Unlit: The switch does not supply power to a PD, or supplies power to a PD normally and
its output power does not reach the upper limit. The PoE-MAX indicator will be unlit in 5
seconds after the output power of the switch returns to normal.
PoE-MAX Indicator
①
②
③
• Solid on: The gigabit SFP fiber optical port is connected.
• Flashing: The gigabit SFP fiber optical port is transmitting data.
• Unlit: The gigabit SFP fiber optical port is disconnected or connection is abnormal.
④
Optical Port Indicator
⑤
Indicators
• Solid on: The switch is powered on normally.
• Unlit: No power supply is connected or power supply is abnormal.
PWR Indicator
Scan the QR code to obtain
product introduction, packing
list, and appearance of your
desired device model.
Device Information ▷
Used for switching the
switch’s working mode. If
the corresponding indicator
is solid on, it indicates that
the switch works in this
mode.
Mode Button
Toggle on or off the DIP
switch to enable or
disable the Extend mode
(specified ports of the
switch support network
transmission of up to 300
meters).
DIP Switch
or
Press and hold the
reset button for about
5 seconds to restore
all the configurations
of the switch to
default settings.
Use the attached power
cord (and power adapter,
if any) to connect the
switch to a power socket.
Grounding Terminal Power SupplyReset Button
12
* The ports, indicators, etc. above are only enumerations. For more information, see Device Information.


Earth
≥ 0.5 m
356
② Install Your Switch
Before You Start
▷Wall-Mounted Installation
• Ensure that the desktop, wall, or rack is stable and
firm enough.
• Keep the room well-ventilated. Leave at least 10 cm
heat dissipation space around the device.
• Keep at least 1.5 cm vertical distance between two
adjacent devices for rack-mounted installation.
Please select an appropriate installation method
according to the actual needs.
Place the device on the desk.
▷Desktop Placement
Steps
1. Check the distance between the two hanging holes
at the bottom of the device.
2. Insert two self-prepared M4 screws into the wall.
3. Align the hanging holes with screws, and hang the
device on the screws.
• The load-bearing capacity of the wall should be 3
times more than the weight of the device.
• Ensure that the distance between the two screws
equals to the distance between the two hanging holes.
• Set aside at least 4 mm of the screw bodies outside
the wall.
Steps
1. Check the grounding and stability of the rack.
2. Use M3 or M4 screws provided in the package to fix
the two L-shaped brackets to both sides of the
device.
▷Rack-Mounted Installation
3. Fix two self-prepared M5 or M6 nuts to the rear side
of the rack on both sides respectively.
4. Place the switch against the rack so that the holes on
the L-shaped brackets are aligned with the holes
where the nuts have been fixed.
5. Fix the brackets to the front side of the rack with two
self-prepared M5 or M6 screws on both sides
respectively to stably install your device.
③ Ground Your Switch
Grounding is used to quickly release overvoltage and
overcurrent induced by lightening for the switch, and to
protect personal safety.
Select an appropriate grounding method according to
your needs.
Grounding Terminal
Grounding Cable
Grounding Bar
▷With Grounding Bar
▷Without Grounding Bar
Grounding Terminal
Grounding Cable
Angle Steel
Steps
1. Connect one end of the grounding cable to the
binding post on the grounding bar.
2. Connect the other end of the grounding cable to the
device's grounding terminal and fix the screw.
If a grounding bar is available at the installation site,
follow the steps below.
If there is no grounding bar but the earth is nearby and
the grounding body is allowed to be buried, follow the
steps below.
4
Steps
1.Bury an angle steel or steel pipe (≥ 0.5 m) into the
earth.
2.Weld one end of the grounding cable to the angle
steel or steel pipe and embalm the welding point via
electroplating or coating.
3.Connect the other end of the grounding cable to the
device's grounding terminal.
▷RJ45 Port
Use a network cable to connect the device to the RJ45
port of a peer device such as the IP camera (IPC),
network video recorder (NVR), switch, etc.
④ Connect Your Switch to a Peer Device
▷SFP Fiber Optical Port
If the device has a fiber optical port or a combo,
connect the device to a peer device through an optical
fiber connecting optical modules plugged into fiber
optical ports respectively.
• Single-mode optical modules need to be paired.
• Do not bend an optical fiber (curvature radius ≥ 10 cm) overly.
• Do not look directly at an optical fiber connector as laser is
harmful to eyes.
Steps
1. Connect the two paired SFP optical modules with an
optical fiber.
2. Hold the SFP optical module from one side, and
smoothly plug it into the switch along with the SFP
port slot until the optical module and the switch are
closely attached.
3. After powering your switch on, check the status of
the LINK/ACT indicator.
– If the indicator is lit, the link is connected.
– If the indicator is unlit, the link is disconnected.
Check the line, and make sure the peer device has
been started.
For PoE switches, power cables and network cables cannot be
wired together, otherwise the PD or switch ports will be burnt.
Please use the attached power cord (and power
adapter, if any) in package to power on the device.
Before powering your switch on, make sure that:
⑤ Power Your Switch On
Scan the QR code below to quickly get support on answers to
FAQs.
⑥ Get More Information
• The operating power supply is compliant with the
rated input standard.
• Port cables and grounding cables are correctly
connected.
• If there is outdoor cabling, connect a lightning rod
and lightening arrester to the cable.
The number of screws provided for fixing L-shaped
brackets to the device varies with device models.
• When connected to a network cable, the combo is a
RJ45 port.
• When plugged into with an optical module and
connected to an optical fiber, the combo functions as
a fiber optical port.
• When connected to both the network cable and
optical fiber at the same time, the combo works as a
fiber optical port.
The following figures are for your reference only.
Product specificaties
Merk: | Hikvision |
Categorie: | Schakelaar |
Model: | DS-XS10G-P |
Heb je hulp nodig?
Als je hulp nodig hebt met Hikvision DS-XS10G-P stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Schakelaar Hikvision

29 Maart 2025

13 Maart 2024

16 Juni 2023

8 Juni 2023

16 Mei 2023

6 Mei 2023

30 April 2023

11 April 2023

3 April 2023
Handleiding Schakelaar
- Schakelaar Bosch
- Schakelaar Philips
- Schakelaar HP
- Schakelaar IKEA
- Schakelaar Panasonic
- Schakelaar Huawei
- Schakelaar Asus
- Schakelaar Honeywell
- Schakelaar Yamaha
- Schakelaar Abus
- Schakelaar Airlive
- Schakelaar Alcatel
- Schakelaar Alecto
- Schakelaar Alpine
- Schakelaar Ansmann
- Schakelaar Apc
- Schakelaar Audiovox
- Schakelaar B-tech
- Schakelaar Basetech
- Schakelaar Behringer
- Schakelaar Belkin
- Schakelaar Berker
- Schakelaar Boss
- Schakelaar Brennenstuhl
- Schakelaar Buffalo
- Schakelaar D-Link
- Schakelaar Digitus
- Schakelaar Eaton
- Schakelaar EBERLE
- Schakelaar Ebode
- Schakelaar Edimax
- Schakelaar Elektrobock
- Schakelaar Elro
- Schakelaar Emerson
- Schakelaar Eminent
- Schakelaar Engenius
- Schakelaar Extech
- Schakelaar Finder
- Schakelaar Flamingo
- Schakelaar GAO
- Schakelaar Generac
- Schakelaar Gira
- Schakelaar Goobay
- Schakelaar Grandstream
- Schakelaar Grasslin
- Schakelaar Hager
- Schakelaar Hama
- Schakelaar Intermatic
- Schakelaar Inverto
- Schakelaar Kathrein
- Schakelaar KlikaanKlikuit
- Schakelaar Konig
- Schakelaar Kopp
- Schakelaar Lancom
- Schakelaar LevelOne
- Schakelaar Linksys
- Schakelaar Logilink
- Schakelaar Manhattan
- Schakelaar Marmitek
- Schakelaar Mercury
- Schakelaar Merlin Gerin
- Schakelaar Mikrotik
- Schakelaar Monacor
- Schakelaar Nedis
- Schakelaar Netgear
- Schakelaar Paladin
- Schakelaar PCE
- Schakelaar Perel
- Schakelaar Plantronics
- Schakelaar Powerfix
- Schakelaar Profile
- Schakelaar Provision ISR
- Schakelaar Pyle
- Schakelaar QNAP
- Schakelaar Renkforce
- Schakelaar Rex
- Schakelaar Robbe
- Schakelaar Schneider
- Schakelaar SEC24
- Schakelaar Shimano
- Schakelaar Silvercrest
- Schakelaar Smartwares
- Schakelaar Speaka
- Schakelaar Suevia
- Schakelaar Sygonix
- Schakelaar Sylvania
- Schakelaar Tenda
- Schakelaar Tesla
- Schakelaar Theben
- Schakelaar Tiptel
- Schakelaar Toolcraft
- Schakelaar Tork
- Schakelaar TP Link
- Schakelaar Trendnet
- Schakelaar Triax
- Schakelaar Trotec
- Schakelaar Unify
- Schakelaar UPM
- Schakelaar Velleman
- Schakelaar Vivanco
- Schakelaar WHALE
- Schakelaar Worx
- Schakelaar ZyXEL
- Schakelaar Jabra
- Schakelaar Jung
- Schakelaar Omnitronic
- Schakelaar One For All
- Schakelaar Clas Ohlson
- Schakelaar CSL
- Schakelaar Monoprice
- Schakelaar Steren
- Schakelaar DoorBird
- Schakelaar Ubiquiti Networks
- Schakelaar EMOS
- Schakelaar Kaiser
- Schakelaar Cotech
- Schakelaar Atlona
- Schakelaar Hamlet
- Schakelaar Comet
- Schakelaar Vivolink
- Schakelaar Techly
- Schakelaar SIIG
- Schakelaar Merten
- Schakelaar Tripp Lite
- Schakelaar Chacon
- Schakelaar Nexa
- Schakelaar Dormakaba
- Schakelaar SPC
- Schakelaar Cisco
- Schakelaar Victron Energy
- Schakelaar Delta Dore
- Schakelaar Vemer
- Schakelaar Matrox
- Schakelaar Gefen
- Schakelaar Ei Electronics
- Schakelaar Fibaro
- Schakelaar GEV
- Schakelaar Juniper
- Schakelaar Planet
- Schakelaar Chamberlain
- Schakelaar Intellinet
- Schakelaar CyberPower
- Schakelaar SunBriteTV
- Schakelaar Lindy
- Schakelaar IOGEAR
- Schakelaar Black Box
- Schakelaar IFM
- Schakelaar DataVideo
- Schakelaar Wago
- Schakelaar Sonance
- Schakelaar Totolink
- Schakelaar Dahua Technology
- Schakelaar AV:link
- Schakelaar PreSonus
- Schakelaar Mercusys
- Schakelaar Elation
- Schakelaar EVE
- Schakelaar Audac
- Schakelaar Vacmaster
- Schakelaar ATen
- Schakelaar RGBlink
- Schakelaar PAC
- Schakelaar Wentronic
- Schakelaar Adder
- Schakelaar Homematic IP
- Schakelaar Extron
- Schakelaar AMX
- Schakelaar OSD Audio
- Schakelaar Equip
- Schakelaar Crestron
- Schakelaar ORNO
- Schakelaar Aeon Labs
- Schakelaar Electro Harmonix
- Schakelaar StarTech.com
- Schakelaar PureLink
- Schakelaar Advantech
- Schakelaar Smart-AVI
- Schakelaar Brilliant
- Schakelaar Kramer
- Schakelaar Micro Connect
- Schakelaar KanexPro
- Schakelaar Intelix
- Schakelaar Blustream
- Schakelaar Avocent
- Schakelaar Shelly
- Schakelaar ICasa
- Schakelaar Vimar
- Schakelaar Kemo
- Schakelaar H-Tronic
- Schakelaar Legrand
- Schakelaar Kraus & Naimer
- Schakelaar Noble
- Schakelaar Intertechno
- Schakelaar Ecler
- Schakelaar Rule
- Schakelaar CYP
- Schakelaar Phoenix Contact
- Schakelaar Seuthe
- Schakelaar Maclean Energy
- Schakelaar SmartAVI
- Schakelaar Leviton
- Schakelaar DEHN
- Schakelaar Cudy
- Schakelaar Heitronic
- Schakelaar Noark
- Schakelaar Cooking Performance Group
- Schakelaar Ernitec
- Schakelaar Adviti
- Schakelaar Flic
- Schakelaar HELGI
- Schakelaar IB Connect
- Schakelaar Liberty
- Schakelaar Alfatron
- Schakelaar Cambium Networks
- Schakelaar 2USB
- Schakelaar Roline
- Schakelaar KVM-TEC
- Schakelaar BZBGear
- Schakelaar STI
- Schakelaar Epiphan
- Schakelaar Ebara
- Schakelaar Mach Power
- Schakelaar Axing
- Schakelaar Raritan
- Schakelaar ConnectPro
- Schakelaar Atlantis Land
- Schakelaar Pizzato Elettrica
- Schakelaar Baco
- Schakelaar SEADA
- Schakelaar Doepke
- Schakelaar IPGARD
- Schakelaar Setti+
- Schakelaar INOGENI
- Schakelaar Luxul
Nieuwste handleidingen voor Schakelaar

31 Maart 2025

31 Maart 2025

31 Maart 2025

31 Maart 2025

31 Maart 2025

31 Maart 2025

29 Maart 2025

20 Maart 2025

11 Maart 2025

11 Maart 2025