Luxul XMS-1010P Handleiding

Luxul Schakelaar XMS-1010P

Lees hieronder de 📖 handleiding in het Nederlandse voor Luxul XMS-1010P (8 pagina's) in de categorie Schakelaar. Deze handleiding was nuttig voor 6 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
READ ME FIRST
QUICK INSTALL GUIDE
10-Port/8 PoE+ Gigabit
Managed Switch
XMS-1010P
Includes:
XMS-1010P 10-Port/8 PoE+ Gigabit Managed Switch
Rack Mount Kit
Rubber Feet
Power Cord
SETUP AND CONFIGURATION
1
Physical Installation
The XMS-1010P can be rack-mounted or used as a desktop switch. Install the
XMS-1010P in a stable/safe place to avoid any possible damage. Make sure there
is adequate space around the XMS-1010P for ventilation and proper heat dissi-
pation; Luxul recommends at least 4-6 inches around all sides. Avoid placement
in direct sunlight. Do not place heavy articles on the XMS-1010P and verify the
ground connection of the outlet is functioning properly.
Desktop/Shelf Installation
For desktop/shelf installation, attach the four rubber feet to the corner inden-
tations on the bottom of the XMS-1010P, then place the switch horizontally on
a solid, level platform.
Rack Installation
Use the included L brackets for convenient installation in a 19-inch server or
audio rack. As shown below, use four screws to attach the L-shaped brackets
on either sides of the XMS-1010P, and horizontally insert the switch into the
rack. Use your desired hardware to ax the switch supports to the rack.
Attach feet for desktop installation Install brackets for rack-mounting
2
Connecting Ethernet and Power
Ethernet and Power Connections
Use any RJ-45 to connect the XMS-1010P to an Ethernet-enabled device,
including servers, routers or other switches. No crossover cable is necessary.
The XMS-1010P supports 10/100/1000 Mbps Ethernet; 10/100 Mbps half/
full-duplex mode and 1000 Mbps full-duplex mode. All ten RJ-45 ports
support Auto MDI/MDIX and can be used as ordinary ports or as Uplink
ports. Ports 1-8 are PoE+ and are enabled by default.
Use the included power cable to connect the XMS-1010P to a surge protect-
ed outlet. The AC input socket and a power switch are on the rear panel.
The built-in power supply supports 100~240VAC at 50/60Hz.
Network Cabling
Luxul recommends Category-5, super Category-5 or Category-6 unshielded
twisted pair (CAT5/CAT5e/CAT6 UTP). To ensure best performance and
stable data transmission at 1000 Mbps, use Category-6 shielded twisted pair.
cCAUTION: Multiple Uplink channels can create loops, resulting in
network failure. Ensure only one Uplink channel exists
between switches or between the XMS-1010P and a router.
nNOTE: When powering up, the port LEDs corresponding to the opti-
cal interface may take a moment to initialize. This is normal
as the XMS-1010P initialization and startup completes.
nNOTE: The XMS-1010P has an internal 130W power supply. For
optimal switch performance, do not exceed 115W combined
consumption of all external PoE devices.


Product specificaties

Merk: Luxul
Categorie: Schakelaar
Model: XMS-1010P
Kleur van het product: Zwart, zilver
Gewicht: 1800 g
Breedte: 292 mm
Diepte: 178 mm
Hoogte: 44.5 mm
LED-indicatoren: Activity, Link, PoE, Power
Meegeleverde kabels: AC
Snelstartgids: Ja
Certificering: FCC, IC, CE, RoHS, EN60950
Ethernet LAN, data-overdrachtsnelheden: 10,100,1000 Mbit/s
Netwerkstandaard: IEEE 802.1D, IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Rack-montage: Ja
Vermogenstoevoer inclusief: Ja
Quality of Service (QoS): Ja
VLAN=ondersteuning: Ja
Virtuele LAN-functies: Port-based VLAN
Power over Ethernet (PoE): Ja
Switchingcapaciteit: - Gbit/s
MAC-adrestabel: - entries
Aantal VLANs: 4094
Switch type: Managed
Aantal basis-switching RJ-45 Ethernet-poorten: 10
Aantal Gigabit Ethernet (koper)-poorten: 10
Netstekker: DC-in ingang
Type basis-switching RJ-45 Ethernet-poorten: Gigabit Ethernet (10/100/1000)
Full duplex: Ja
AC-ingangsspanning: 100 - 240 V
AC-ingangsfrequentie: 50 - 60 Hz
Bedrijfstemperatuur (T-T): 0 - 40 °C
Relatieve vochtigheid in bedrijf (V-V): 10 - 90 procent
Totaal Power over Ethernet (PoE)-budget: 130 W
Aantal Power over Ethernet plus (PoE +)-poorten: 8
Ondersteundende kabel types: Cat5, Cat5e, Cat6
Rekbevestigingspakket: Ja
Algoritmen wachtrijplanning: Priority queuing (PQ), Weighted Round Robin (WRR)
Type Power over Ethernet (PoE) ondersteunt: PoE+

Heb je hulp nodig?

Als je hulp nodig hebt met Luxul XMS-1010P stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Schakelaar Luxul

Handleiding Schakelaar

Nieuwste handleidingen voor Schakelaar