Luxul AMS-1208P Handleiding

Luxul Schakelaar AMS-1208P

Lees hieronder de 📖 handleiding in het Nederlandse voor Luxul AMS-1208P (8 pagina's) in de categorie Schakelaar. Deze handleiding was nuttig voor 4 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/8
READ ME FIRST
QUICK INSTALL GUIDE
AV Series 12-Port/8 PoE+
Gigabit Managed Switch
AMS-1208P
Includes:
AMS-1208P 12-Port/8 PoE+ Switch
Rack Mount Kit
Rubber Feet
Power Cord
INSTALLATION AND SETUP
1
Physical Installation
The AMS-1208P can easily be installed in a standard 19” rack. Two mounting ears
are included for installing and stabilizing the switch. When attaching the mounting
ears and installing the switch in a rack, please refer to the following illustration:
Rack-Mounting the AMS-1208P
Use the included screws to attach the mounting ears to each side
of the switch.
Mount the switch in the rack with the LEDs facing outwards. Be sure the
switch is level and properly secured in the rack.
Desktop Setup
For use as a desktop device, position and apply the included rubber feet to the
bottom of the AMS-1208P.
2Connecting Ethernet and Power
Ethernet and Power Connections
Use one of the ten Ethernet ports to connect the AMS-1208P to any Ethernet-
enabled device, including servers, routers or other switches. No crossover cable
is necessary.
The AMS-1208P supports 10/100/1000 Mbps Ethernet; 10/100 Mbps half/
full-duplex mode and 1000 Mbps full-duplex mode. Ports 1-8 are PoE+ and
are enabled by default. Ports 9 and 10 are Gigabit Ethernet only (non PoE),
while ports 11 and 12 are Gigabit SFP ports.
Use the included power cable to connect the AMS-1208P to a surge-
protected outlet. The AC input socket is on the rear panel. The built-in
power supply supports 100~240VAC at 50/60Hz.
Network Cabling
Luxul recommends at least Cat-5e unshielded twisted pair (CAT5e UTP)
cabling. To ensure best performance and stable data transmission at 1000
Mbps, use Category-6 unshielded twisted pair (CAT6 UTP).
If you intended to use optical fiber to extend the network beyond the 300-
foot limit of twisted pair Ethernet, SFP modules are required (not included).
cCAUTION: Multiple Uplink channels can create loops, resulting in
network failure. Ensure only one Uplink channel exists
between switches or between the AMS-1208P and a router.
nNOTE: When powering up, the port LEDs may take a moment to
initialize. This is normal as the AMS-1208P initialization and
startup sequence completes.
nNOTE: The AMS-1208P has an internal 130W power supply. Do not
exceed 25.5W each or 130W combined consumption of all
external PoE devices.

Product specificaties

Merk: Luxul
Categorie: Schakelaar
Model: AMS-1208P

Heb je hulp nodig?

Als je hulp nodig hebt met Luxul AMS-1208P stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Schakelaar Luxul

Luxul

Luxul XGS-1008 Handleiding

13 Januari 2025
Luxul

Luxul AMS-4424P Handleiding

13 Januari 2025
Luxul

Luxul AMS-1208P Handleiding

13 Januari 2025
Luxul

Luxul XMS-1010P Handleiding

13 Januari 2025
Luxul

Luxul AGS-1024 Handleiding

13 Januari 2025
Luxul

Luxul XGS-1024S Handleiding

13 Januari 2025
Luxul

Luxul AMS-1816P Handleiding

13 Januari 2025
Luxul

Luxul XMS-2624P Handleiding

13 Januari 2025
Luxul

Luxul AGS-1016 Handleiding

13 Januari 2025
Luxul

Luxul AMS-2600 Handleiding

13 Januari 2025

Handleiding Schakelaar

Nieuwste handleidingen voor Schakelaar

Ebara

Ebara ServoPress LP Handleiding

14 Januari 2025
Adder

Adder Link INFINITY 1000 Handleiding

13 Januari 2025
Adder

Adder SmartView MultiScreen Handleiding

13 Januari 2025
Schneider

Schneider CCT15225 Handleiding

13 Januari 2025
INOGENI

INOGENI CAM230 Handleiding

13 Januari 2025
Sonance

Sonance SS4 Handleiding

8 Januari 2025
Advantech

Advantech EKI-2711PSI Handleiding

7 Januari 2025
Homematic IP

Homematic IP HMIP-PSM-CH Handleiding

7 Januari 2025
Smart-AVI

Smart-AVI SM-DVN-84X Handleiding

6 Januari 2025
Smart-AVI

Smart-AVI SM-MST-2D Handleiding

6 Januari 2025