Luxul XAP-810 Handleiding

Luxul Access point XAP-810

Lees hieronder de 📖 handleiding in het Nederlandse voor Luxul XAP-810 (2 pagina's) in de categorie Access point. Deze handleiding was nuttig voor 38 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

Access Point Setup Gu

Setting up your AP:

Place the AP in the center

of the desired coverage area

NOTE: If installing this AP w

wireless controller, refer to the Wireless Controller Setup Guide

Connect a PoE+ Ethernet cable to the AP’s PoE

port (for power, use the included PoE injector

or a compatible PoE+ switch)

AP power

source

router or

switch

OUT

POE

INJECTOR

Connecting Via an Ethernet Device

Use an Ethernet cable to connect your computer to the LAN port

of the AP. Ethernet is the preferred method of connection

Connecting Via a Wireless Device

Connect a wireless client device to the AP’s default wireless

network: Luxul_XAPXXXX* and use the passphrase luxulwiﬁ.

*XXXX corresponds to the model number of the AP

NOTE: If your computer or device isn’t set to obtain an IP

address automatically, you’ll need to set a temporary static

IP address on that device. Set the IP address of your computer

to an address in the 192.168.0.X range, then set the gateway/router

address to 192.168.0.10

Visit http://luxul.com/ip-addressing to learn more about changing

your computer’s IP address and getting connected

3a.

3b.

Open a web browser and go to 192.168.0.10

U: admin

P: admin

NOTE: You will be required to change

the default administrator password

View Luxul’s privacy policy at:

https://www.luxul.com/about-us/legal/privacy-policy.aspx

No part of this document may be modiﬁed or adapted in any way, for any purposes without permission in

writing from Luxul. The material in this document is subject to change without notice. Luxul reserves the

right to make changes to any product to improve reliability, function, or design. No license is granted, either

expressly or by implication or otherwise under any Luxul intellectual property rights. An implied license

only exists for equipment, circuits and subsystems contained in this or any Luxul product.

mark and Simply Connected are all trademarks and or registered trademarks of Legrand AV Inc.

All other trademarks and registered trademarks are property of their respective holders.

Technical Support

P: 801-822-5450

E: support@luxul.com

For support chat go to:

luxul.com

Sales

P: 801-822-5450

E: sales@luxul.com

I need to restore factory default settings?

To restore factory default settings to your AP, press and

hold the button labeled ‘RESET’ until the green system LED

starts ﬂashing (5 seconds)

I need to restart my AP?

To restart your AP, press and quickly release the button

labeled ‘RESET’

I want to perform advanced conﬁguration?

1. Open a web browser and go to 192.168.0.10 or the IP

address you speciﬁed during the setup process

2. Enter the login credentials you created during the

setup process

What if... What do the LEDs on my AP indicate?

Indicator DescriptionState

Green

System

LED

On AP is properly connected to power supply

Blinking AP is booting

O AP is not connected to power or the LED is

turned o in the web interface

Blue

LEDs

The blue LEDs indicate the status of the wireless broadcast,

one for 2.4GHz and the other for 5GHz

On AP is broadcasting a wireless signal

Blinking Indicates wireless activity

O AP is not broadcasting a signal, or the LED

is turned o in the web interface

Product specificaties

Merk:	Luxul
Categorie:	Access point
Model:	XAP-810
Kleur van het product:	Zwart
Gewicht:	440 g
Breedte:	158.75 mm
Diepte:	44.45 mm
Hoogte:	158.75 mm
LED-indicatoren:	Stroom
Plaatsing:	Table, Wall
Montage gereedschap:	Ja
Vermogensverbruik (max):	17 W
MIMO:	Ja
Duurzaamheidscertificaten:	CE, RoHS
Ethernet LAN, data-overdrachtsnelheden:	10,100,1000 Mbit/s
Netwerkstandaard:	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3at
Ondersteunde beveiligingsalgoritmen:	WPA, WPA-PSK, WPA2, WPA2-PSK
Soort antenne:	Intern
Antennas quantity:	2
Upgraden van firmware mogelijk:	Ja
Reset button:	Ja
MIMO-type:	Multi User MIMO
Maximale overdrachtssnelheid van gegevens:	1200 Mbit/s
2,4 GHz:	Ja
5 GHz:	Ja
VLAN=ondersteuning:	Ja
Power over Ethernet (PoE):	Ja
Maximale overdrachtssnelheid van gegevens (2.4 GHz):	300 Mbit/s
Maximale overdrachtssnelheid van gegevens (5 GHz):	866 Mbit/s
Stroomverbruik (typisch):	12 W
Bedrijfstemperatuur (T-T):	32 - 104 °C
Aantal SSID-ondersteuningen:	8