Luxman SQ-N100 Handleiding

Luxman Niet gecategoriseerd SQ-N100

Lees hieronder de 📖 handleiding in het Nederlandse voor Luxman SQ-N100 (12 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 5 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/12
Owner`s Manual
VACUUM TUBE INTEGRATED AMPLIFIER
SQ-N100
2
Contents
Precautions ...................................................................................................................3
Names and Functions of Parts......................................................................................4
Connections ..................................................................................................................8
Connection diagram......................................................................................................9
Operation ....................................................................................................................10
SQ-N100 Block Diagram.............................................................................................11
Specifications..............................................................................................................12
Troubleshooting ..........................................................................................................13
3
Precautions
Installation location
Install this unit where good venti-
lation and heat radiation are
assured. Do not install where the
temperature is abnormally high
such as in direct sunlight, or
where it is dusty or humid, as this
could result in damage to this unit
despite proper heat radiation. Do
not install this unit where it will
create problems for driving the
car.
Ventilation holes
The amplifier has many vacuum
tubes, generating much heat.
Never close the ventilation holes
located on the vacuum tube cover
and the bottom plate. If the ampli-
fier is installed on a rack or the
like, secure ample space for cool-
ing and leave the door open. Do
not pile up other things on the
amplifier and never put articles on
it. This can cause malfunctioning.
Note:
For heat dispersal, do not install
this equipment in a confined
space such as a book case or
similar unit.
Connection with other
components
When connecting this unit with a
CD/DVD player, tuner, or another
input unit, turn off the power
switches of this unit and all other
connected units. Otherwise, a
very strong noise may be generat-
ed and destroy the speakers. In
the worst case, this can cause
equipment malfunction.
The pin-plug to be inserted in
each input terminal of this unit
shall be pushed in firmly. If the
earth side is inadequately insert-
ed, humming and such noise may
be generated, resulting in an
adverse S/N ratio.
Cautions for speaker
connections
When making speaker system
connections, be sure not to cause
short-circuiting between !and @
of the speaker terminals and
speaker input terminals of this
unit. If signals are applied to the
amplifier with its circuit left short-
circuited, a large current may be
carried in the output circuit and
cause malfunctioning.
The sound is not generated
shortly after the power supply
is turned on.
This amplifier is equipped with a
time muting circuit intended for
the separation of the output cir-
cuit. For this reason, no sound is
generated shortly after the power
supply is turned on.
If the volume control is moved to a
high sound level before this time
muting circuit is canceled, a large
sound is suddenly generated as a
result. We therefore advise initially
setting the volume control at a low
level. After that, you may move
the volume control to your favorite
sound level after the initial sound
has come out of the speakers.
Batteries
Caution:
Batteries used for remote con-
troller shall not be exposed to
excessive heat such as sunshine,
fire or the like.
Repair and adjustments
When repair and adjustments are
needed, please ask the store
where you bought the unit.
Cleaning
For cleaning, use a piece of soft
cloth to wipe the unit such as
cleaning cloth available on the
market.
If the unit has become very dirty,
remove the dirt with soft cloth
absorbing a small amount of neu-
tral detergent, and then wipe the
unit with dry cloth. Do not use a
solvent like benzine or thinner
because such a substance can
often damage the exterior.
* Note
Wall
* *
*

Product specificaties

Merk: Luxman
Categorie: Niet gecategoriseerd
Model: SQ-N100

Heb je hulp nodig?

Als je hulp nodig hebt met Luxman SQ-N100 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Luxman

Luxman

Luxman PD-171A Handleiding

13 November 2024
Luxman

Luxman PD-151 Handleiding

13 November 2024
Luxman

Luxman PD-191A Handleiding

13 November 2024
Luxman

Luxman SQ-N100 Handleiding

13 November 2024
Luxman

Luxman D-N100 Handleiding

13 November 2024
Luxman

Luxman PD-171AL Handleiding

13 November 2024
Luxman

Luxman LMC-5 Handleiding

13 November 2024
Luxman

Luxman SQ-38u Handleiding

3 November 2024
Luxman

Luxman MQ-300 Handleiding

3 November 2024
Luxman

Luxman MQ-88uSE Handleiding

3 November 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Neff

Neff Z8200X1 Handleiding

14 November 2024
Neff

Neff Z5135X1 Handleiding

14 November 2024
Sven

Sven SF-05LU Handleiding

14 November 2024
Advantech

Advantech IDAQ-784-A Handleiding

14 November 2024
Advantech

Advantech IDAQ-817-AE Handleiding

14 November 2024
Advantech

Advantech SOM-7533CCBC-S5A1 Handleiding

14 November 2024
Advantech

Advantech IDAQ-873-A Handleiding

14 November 2024
Advantech

Advantech PCM-9563NF-S2A2 Handleiding

14 November 2024
Advantech

Advantech PCM-3680-BE Handleiding

14 November 2024
Advantech

Advantech PCI-1733-BE Handleiding

14 November 2024