Metra AXDSPX-ETH1 Handleiding

Metra Niet gecategoriseerd AXDSPX-ETH1

Lees hieronder de 📖 handleiding in het Nederlandse voor Metra AXDSPX-ETH1 (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 5 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

AXDSPX-ETH1

I N S TA L L AT I O N I N S T R U C T I O N S

ATTENTION: With the key out of the

ignition, disconnect the negative battery

terminal before installing this product. Ensure

that all installation connections, especially the

air bag indicator lights, are plugged in before

reconnecting the battery or cycling the ignition

to test this product.

NOTE: Refer also to the instructions included

with the aftermarket radio.

INTERFACE FEATURES

INTERFACE COMPONENTS

TOOLS REQUIRED

• Crimping tool and connectors, or solder gun,

solder, and heat shrink • Tape • Wire cutter

• Zip ties

TABLE OF CONTENTS

Connections ............................................................2

Installation .............................................................3

Troubleshooting .....................................................4

GENERAL MOTORS

2019-UP

ETHERNET DSPX PACKAGE

• Designed for GM Ethernet ampliﬁers

• Ethernet data interface w/AXDSP-X (digital signal processor) built-in

• Includes an ampliﬁer bypass harness

• Retains factory chimes including parking sensor chimes

• Retains vehicle’s voice prompts

• Chimes and voice prompts go through the aftermarket ampliﬁer and/

or cluster

• Selectable 31 Band graphic EQ or 5 Band Parametric EQ

• 10 individually assignable outputs

• AXDSPX-ETH1 interface

• AXDSPX-ETH1 harness

• LD-DSP-ETH1

• LD-DSP-ETH2

• AXBK-1

• AXDSPX-ETH1 interface harness

(male connectors: 8-pin, 16-pin)

• Ampliﬁer bypass harness

(female connectors: 8-pin black

and 20-pin green )

For refer to Enter the year, make, and model of the vehicle in theDash Disassembly Instructions, metraonline.com. Vehicle Fit Guide for Radio Install kits.

Visit

axxessinterfaces.com

for current application list.

• Independent equalization on each of the 10 outputs

• Independent high pass, low pass, and bandpass ﬁlters

• Each channel can be delayed independently up to 10ms

• Clipping detection and limiting circuits

•

Settings adjusted via Bluetooth® in a smart device application (tablet

or mobile phone), compatible with both Android and Apple devices

• Read, write, and store conﬁgurations for future recall

• Password protect feature available in the mobile app

• Micro-B USB updatable

CONNECTIONS

Assignable outputs labeled

CH 7-10 to be used

for optional amps.

An SPDT relay, Metra part number

E-123, must be used if the amp turn-on

current of all amps exceed 1-amp.

AXBK-1

SUB

Factory Amp

(must be removed)

Factory Amp Harness RCA Jacks

(sold separately) Gray - Front Right +

Gray/Black - Front Right -

White - Front Left +

White/Black - Front Left -

Brown/White * - Center +

Purple - Rear Right +

Purple/Black - Rear Right -

Green - Rear Left +

Green/Black - Rear Left -

Dark Blue/Pink * - Center -

Brown/Yellow - Subwoofer Right +

Brown/Blue - Subwoofer Right -

Green/White - Subwoofer Left +

White/Red - Subwoofer Left -

AXBK-1

CH6

Blue/White - Amp Turn-On Wire

Red/White - Do Not Use

AXDSPX-ETH1

Interface

Applications

LD-DSP-ETH1 2019-2021

LD-DSP-ETH2 2022-UP

REV. 8/19/22 INSTAXDSPX-ETH1

INSTALLATION

1. Locate the factory amp (†), unplug all connectors, then remove the amp.

2. Install the AXDSPX-ETH1 harness and make all necessary connections, but leave the amp

turn-on wire disconnected.

3. Plug the 8-pin and 16-pin connectors from the AXDSPX-ETH1 harness into the

AXDSPX-ETH1 interface.

4. Download and install the AXDSP-X app from the Google Play Store Apple App Store or .

5. Open the app and follow the instructions on the Bluetooth Connection tab to pair the

mobile device to the AXDSPX-ETH1. (Figure A)

6. Scroll to the Conﬁguration tab then select the vehicle type. Press the Lock Down button to

save the conﬁguration. (Figure B)

7. Connect the amp turn-on wire from the AXDSPX-ETH1 harness.

8. Identify Click the button to conﬁrm that the AXDSPX-ETH1 is connected properly. If so, a

chime will be heard from the front left speaker or gauge cluster. Test all functions of the

installation for proper operation.

Adjust the DSP settings in the app as desired. Refer to the instructions under the Setup

Instructions tab, or online at Axxessinterfaces.com for an explanation of each tab in the app.

(Figure A)

(Figure B)

Product specificaties

Merk:	Metra
Categorie:	Niet gecategoriseerd
Model:	AXDSPX-ETH1

Heb je hulp nodig?

Als je hulp nodig hebt met Metra AXDSPX-ETH1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Metra

Metra PR-LOC2.2-LD Handleiding

3 April 2025

Metra AXDSPX-ETH1 Handleiding

3 April 2025

Metra AX-BXLOC2-PRO Handleiding

3 April 2025

Metra 70-5526 Handleiding

11 Maart 2025

Metra 99-8274 Handleiding

13 Januari 2025

Metra 82-8602 Handleiding

13 Januari 2025

Metra Axxess AXUSB-TY5 Handleiding

11 December 2024

Metra 95-7022HG Handleiding

12 November 2024

Metra 95-7642 Handleiding

12 November 2024

Metra 71-017C Handleiding

26 September 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Panasonic SH-FX60 Handleiding

3 April 2025

Panasonic SL-1210MK5 Handleiding

3 April 2025

Panasonic SL-PR300 Handleiding

3 April 2025

Panasonic CQ-DF203W Handleiding

3 April 2025

Panasonic CQ-DF602W Handleiding

3 April 2025

Panasonic CY-EM100N Handleiding

3 April 2025

LG SR-M3DT97 Handleiding

3 April 2025

Lowell ACS-1530-IEC Handleiding

3 April 2025

Linhof Technorama 612 PC II Handleiding

3 April 2025

WyreStorm EXP-CON-H2-DD Handleiding

3 April 2025