Luxman PD-171A Handleiding

Luxman Niet gecategoriseerd PD-171A

Lees hieronder de 📖 handleiding in het Nederlandse voor Luxman PD-171A (28 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 14 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/28
Owne sr`
Manual
BELT DRIVE ANALOG PLAYER
PD-171A
Contents
Precautions 1 ·············································································································
Features of This Unit 2 ································································································
Before Use 4 ··············································································································
Names and Functions 6 ······························································································
How to Assemble 10 ··································································································
Connections 14 ··········································································································
Operations 16 ·············································································································
How to Replace Tone Arm 17 ·····················································································
Block Diagram 19 ·······································································································
Specifications 20 ········································································································
Before Asking for Repair 21 ························································································
BELT DRIVE ANALOG PLAYER PD-171A
1
Precautions
Installation place
• Install this unit in a horizontal and stable place where the
unit is less subject to external vibration.
• Do not install this unit near a television or color monitor.
Keep this unit away from such devices as cassette decks
that are subject to magnetism.
Do not move this unit during playback.
Moving this unit during playback may cause the needle jump,
and damage the needle and the record thereby.
When moving this unit
To move this unit, be sure to turn off the power after stopping
the turntable and removing the record. Next, unplug the pow-
er and phono cables, remove the turntable and the turntable
sheet, and move this unit.
Avoid the following locations for installation.
• Locations exposed to direct sunlight
• Places subject to humidity and with less ventilation
• Places where are extremely hot or cold
• Places subject to vibration
• Places subject to dust
• Places subject to oil, steam, and heat (such as kitchens)
Do not put articles.
Do not put any articles on this unit.
To avoid heat emission
Do not place this unit on such device as an amplifier that may
emit heat. If the unit is installed on a rack, install the unit as
distantly as possible from where the amplifier is installed so
as to avoid heat emission from the amplifier and other audio
devices.
Dew condensation
Be aware that condensation may occur when this unit is
moved from a cold place to a warm place especially in win-
ter or when the temperature of the room where this unit is
installed is quickly raised with a heater or the like. It depends
on the condensation state, however, this unit can be used
after water droplets disappear by turning on the power and
leaving the unit as it is for 1 to 2 hours to keep the unit at room
temperature.
Even in summer, dew condensation can occur if this unit is
directly exposed to cool air from an air conditioner. In such
a case, it is recommended to change the installation place.
Lubrication
Do not lubricate this unit yourself because special oil is used
for the spindle.
Cleaning
• Usually, wipe the unit with a dry soft cloth.
When the dirt is hard to remove, dip soft cloth in detergent
diluted 5 or 6 times with water, wring it well, and remove
contaminants. Then, remove the moisture with dry cloth.
• Be aware that acrylic portions such as dust cover may be
damaged if the portions are rubbed hard.
• Be aware that printed or painted portions may be damaged
if the portions come into contact with alcohol, thinner, ben-
zine, insecticide, or the like. In addition, do not let this unit
contact a rubber or plastic form for a long time. That may
damage the cabinet surface of the unit.
• When using a chemical cloth for cleaning, read the caution
provided with the chemical cloth product.
• Be sure to unplug the power cable from the outlet before
cleaning.
Repair and adjustment
When repairs and adjustments are needed, please ask the
dealer where you bought the unit.

Product specificaties

Merk: Luxman
Categorie: Niet gecategoriseerd
Model: PD-171A

Heb je hulp nodig?

Als je hulp nodig hebt met Luxman PD-171A stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Luxman

Luxman

Luxman PD-171A Handleiding

13 November 2024
Luxman

Luxman PD-151 Handleiding

13 November 2024
Luxman

Luxman PD-191A Handleiding

13 November 2024
Luxman

Luxman SQ-N100 Handleiding

13 November 2024
Luxman

Luxman D-N100 Handleiding

13 November 2024
Luxman

Luxman PD-171AL Handleiding

13 November 2024
Luxman

Luxman LMC-5 Handleiding

13 November 2024
Luxman

Luxman SQ-38u Handleiding

3 November 2024
Luxman

Luxman MQ-300 Handleiding

3 November 2024
Luxman

Luxman MQ-88uSE Handleiding

3 November 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Inglesina

Inglesina Welcome Pad Handleiding

22 December 2024
Inglesina

Inglesina Front Handleiding

22 December 2024
Inglesina

Inglesina Newborn Winter Muff Handleiding

22 December 2024
Inglesina

Inglesina Stroller Winter Muff Handleiding

22 December 2024
Protector

Protector AS-5030.3 V2 Handleiding

21 December 2024
Sabrent

Sabrent AU-MMCW Handleiding

21 December 2024
Sabrent

Sabrent AU-2X35 Handleiding

21 December 2024
Sabrent

Sabrent CB-RS232 Handleiding

21 December 2024
Owon

Owon 500W Handleiding

21 December 2024
Owon

Owon 300W Handleiding

21 December 2024