Lowell ACS-2020-6C-HW Handleiding

Lowell Niet gecategoriseerd ACS-2020-6C-HW

Lees hieronder de 📖 handleiding in het Nederlandse voor Lowell ACS-2020-6C-HW (3 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 31 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/3

INTERNAL USE ONLY: PN 24227

Lowell strives to provide accurate information while reserving the right to change specications and/or improve manufacturing methods without prior notication.

Spec 1003

Model ACS-2020-6C-HW | Rev. 12.20.23 | pg. 1/3

POWER RATING: 120VAC, 60Hz, 20A (each circuit)

CHASSIS: 60” x 2” x 2” steel chassis with black powder epoxy finish

TERMINATION: Hardwired non-metallic flexible conduit with pigtail leads rotates in any

direction. It can be trimmed in the field if needed.

CIRCUITS & RECEPTACLEs: A total of 20 receptacles (10 duplex) are wired into six inde-

pendent cicuits and grouped as shown in photo. Connections are made via pigtail leads

that are tagged according to circuit.

• Circuit 1 powers three (3) NEMA 5-20R duplex receptacles

• Circuit 2 powers two (2) NEMA 5-20R duplex receptacles

• Circuit 3 powers two (2) NEMA 5-20R duplex receptacles

• Circuit 4 powers one (1) NEMA 5-20R duplex receptacle

• Circuit 5 powers one (1) NEMA 5-20R duplex receptacle

• Circuit 6 powers one (1) NEMA 5-20R duplex receptacle

UNIVERSAL MOUNTING BRACKETS: The universal brackets allow for power strip instal-

lation in a variety of applications with receptacles facing front, center or rear. Brackets are

engineered with multiple mounting points and include two types of hardware to facilitate

easy installation in a rack with adjustable or fixed rails, to a wall, or under a desk/counter.

The brackets can be mounted so they are exposed for easy access or concealed beneath

the power strip for an aesthetically cleaner installation.

CERTIFICATION: ETL Listed in U.S./Canada

ORIGIN: Assembled in U.S.A. with U.S. steel chassis and global components

Six-circuit power strip with 20 receptacles (10 duplex) is made to safely power equipment

in installations that require multiple AC power circuits. This power strip requires 35U panel

space (minimum).

ACS Series Model No.

ACS-2020-6C-HW

AC Power Strip w/Six Circuits

FEATURES

Certied

US Steel

Assembled

In USA

with Global

Components

A&E SPECIFICATIONS

The six-circuit power strip shall be Lowell model ACS-2020-6C-HW, which shall feature 20

NEMA 5-20R receptacles (10 duplex) wired into six independent circuits. Circuit one shall

have three grouped duplex receptacles; Circuits two and three shall each have two grouped

receptacles; Circuits four, five and six shall each have one duplex receptacle. Termination

shall be via a six-foot non-metallic flexible conduit with numbered pigtail leads. The steel

chassis with black powder epoxy finish shall measure 60” x 2” x 2”. It shall include universal

mounting brackets and hardware. The power strip shall be ETL Listed and shall be made in

the U.S.A. with global components.

The 6 ft. non-metallic

exible conduit rotates

in any direction.

Mounting

brackets

CIRCUIT 1:

Three duplex ( 20A )

CIRCUIT 2:

Two duplex ( 20A )

CIRCUIT 3:

Two duplex ( 20A )

CIRCUIT 4:

One duplex ( 20A )

CIRCUIT 5:

One duplex ( 20A )

CIRCUIT 6:

One duplex ( 20A )

Pigtail leads are tagged

according to circuit

INTERNAL USE ONLY: PN 24227

Lowell strives to provide accurate information while reserving the right to change specications and/or improve manufacturing methods without prior notication.

Spec 1003

Model ACS-2020-6C-HW | Rev. 12.20.23 | pg. 2/3

3) REATTACH CONNECTOR:

Twist/push the connector to attach it to

the shortened conduit.

1) REMOVE EXCESS LENGTH:

Snip reinforcing rib at desired length.

Bend the conduit to expose the cut and

carefully cut around the conduit without

cutting the wires inside. Remove excess

length.

2) REMOVE CONNECTOR:

Carefully snip the last rib(s) to loosen the

connector from the excess length, then

twist/pull to remove it.

UNIVERSAL MOUNTING BRACKETS: The brackets can be mounted exposed for easy access or concealed for a cleaner install. Includes

variety of hardware for versatile installation.

HOW TO TRIM THE CONDUIT: The 6 ft. non-metallic flexible conduit can be trimmed in the field.

(4) 1/4"-20 x 1/2" screws

(4) at nuts

(4) 10-32 x 1/2" screws

(4) cage nuts

(4) Brackets

RACK w/ ADJUSTABLE RAILS

(side mount : Mount to horizontal side )

supports with universal brackets, 1/4"-20

screws, flat nuts.

RACK w/ ADJUSTABLE RAILS

(rear mount): Mount to rear rail with

universal brackets, 10-32 screws.

RACK w/ FIXED POSITION RAILS

(and rear Z-angle bracket): Mount to

Z-angle with universal brackets, 10-32

screws, cage nuts.

INTERNAL USE ONLY: PN 24227

Lowell strives to provide accurate information while reserving the right to change specications and/or improve manufacturing methods without prior notication.

Spec 1003

Model ACS-2020-6C-HW | Rev. 12.20.23 | pg. 3/3

T H I S

SPEC

SERIES SUMMARY

Power NEMA Chassis Chassis On/Off Surge Remote Mounting Country

Model No. Rating Receptacles Circuits Length Pro le Termination Switch Suppression Power Control Aids of Origin

ACS-1505-SW 15A 5 (15A) 1 12" Standard 6' Det. cord Yes --- --- Brackets U.S.

ACS-1505-SW-SD 15A 5 (15A) 1 12" Standard 6' Det. cord Yes 2-stage --- Brackets U.S.

ACS-1506 15A 6 (15A) 1 20" Low 6' Fixed cord --- 1-stage --- Clips China

ACS-1506-WW 15A 6 (15A) 1 12" Low 6' Fixed cord --- --- --- Screws U.S.

ACS-1507 15A 7 (15A) 1 12" Low 6' Det. cord --- --- --- Screws U.S.

ACS-1512 15A 12 (15A) 1 32" Low 12' Fixed cord --- 1-stage --- Clips China

ACS-1524 15A 24 (15A) 1 60" Low 12' Fixed cord --- 1-stage --- Clips China

ACS-1524-2C 15A 24 (15A) 2 70" Low Pigtail leads --- --- --- Clips China

ACS-2012 20A 8 (15A) + 4 (20A) 1 32" Low 12' Fixed cord --- 1-stage --- Clips China

ACS-2024 20A 16 (15A) + 8 (20A) 1 70" Low 12' Fixed cord --- 1-stage --- Clips China

ACS-2014-HW 20A 14 (20A) 1 30" Standard 6' Conduit --- --- --- Brackets U.S.

ACS-2014-2C-HW 20A 8 (15A) + 6 (20A) 2 30" Standard 6' Conduit --- --- --- Brackets U.S.

ACS-2020-6C-HW 20A 20 (20A) 6 60" Standard 6' Conduit --- --- --- Brackets U.S.

ACS-2020-IG-6C-HW 20A 20 (I.G. 20A) 6 60" Standard 6' Conduit --- --- --- Brackets U.S.

ACS-2020-IG-10C-HW 20A 20 (I.G. 20A) 10 60" Standard 6' Conduit --- --- --- Brackets U.S.

ACS-2024-2C 20A 24 (20A) 2 70" Low Pigtail leads --- --- --- Clips China

ACS-1510-RPC 15A 10 (15A) 1 30" Standard 6' Det. cord --- --- Yes Brackets U.S.

ACS-2010-RPC-HW 20A 10 (20A) 1 30" Standard 6' Conduit --- --- Yes Brackets U.S.

ACS-2018-5C-RPC-HW 20A 18 (20A) 5 60" Standard 6' Conduit --- --- Yes Brackets U.S.

ACS-2018-5C-RPCP-HW 20A 18 (20A) 5 60" Standard 6' Conduit --- 1-stage Yes (P) Brackets U.S.

Chassis Pro le = Standard pro le (2" x 2"), Low pro le (1.625" x 1.375")

Termination = Det. cord (detachable cord), Fixed cord (cord is attached–cannot be removed), Conduit (non-metallic  exible whip w/pigtail leads), Pigtail leads (leads at ends of chassis—no whip)

Switch = Yes (On/off rocker switch)

Surge Suppression = 1-stage (basic surge protection), 2-stage (surge protection with backup)

Remote Power Control = Some receptacles are controlled by a remote switch or sequencer (ordered separately); (P) indicates compatibility with Lowell P-Series pass-through sequencers.

Mounting Aids = Brackets (multi-hole brackets with hardware), Clips (clips and screws with wire tires), or Screws (power strips can mount to rear of US or USV Series shelves).