Lowell ACS-1510-RPC Handleiding

Lowell Niet gecategoriseerd ACS-1510-RPC

Lees hieronder de 📖 handleiding in het Nederlandse voor Lowell ACS-1510-RPC (3 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 7 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/3

INTERNAL USE ONLY: PN 24216

Lowell strives to provide accurate information while reserving the right to change specications and/or improve manufacturing methods without prior notication.

Spec 1108

Model ACS-1510-RPC | Rev. 12.20.23 | pg. 1/3

POWER RATING: 120VAC 60Hz 15A

CHASSIS: 30” x 2” x 2” steel chassis with black powder epoxy finish

TERMINATION: Detachable six-ft. IEC cord with NEMA 5-15P plug

RECEPTACLES: Total of ten NEMA 5-15R receptacles (five duplex). One duplex is un-

switched (always on when supplied with power). Four duplexes are switched (controlled by

a remote switch or sequencer through the RPC terminal).

UNIVERSAL MOUNTING BRACKETS: The universal brackets allow for power strip instal-

lation in a variety of applications with receptacles facing front, center or rear. Brackets are

engineered with multiple mounting points and include two types of hardware to facilitate

easy installation in a rack with adjustable or fixed rails, to a wall, or under a desk/counter.

The brackets can be mounted so they are exposed for easy access or concealed beneath

the power strip for an aesthetically cleaner installation.

CERTIFICATION: ETL Listed in U.S./Canada

ORIGIN: Assembled in the U.S.A. with global components.

INSTALLATION

Use the universal mounting brackets to install the power strip near the equipment. Use

low-voltage cable to connect the RPC terminal to a remote switch or sequencer (required).

The corded power strip with ten 15A receptacles (ve duplex) and remote power control

function (RPC) can be combined with a variety of remote switches or sequencers to provide

a low-voltage method of turning specic equipment on and off from a remote location. The

ability to safely control AC power distribution without directly accessing equipment adds con-

venience, while minimizing the potential for unauthorized system modications.

ACS Series Model No.

ACS-1510-RPC

AC Power Strip w/Remote Power Control

FEATURES

Certied

US Steel

Assembled

In USA

with Global

Components

A&E SPECIFICATIONS

The ETL Listed power strip with low-voltage remote power control shall be Lowell model

ACS-1510-RPC, which shall have a power rating of 120VAC 60Hz 15A with circuit breaker

protection. The chassis shall be steel with black powder epoxy finish, measuring 30” x 2”

x 2”. It shall feature one unswitched and four switched NEMA 5-15R duplex receptacles.

The four switched duplexes shall be controlled by an external power switch or sequencer

(ordered separately) that is connected to the power strip’s remote power control terminal.

The power strip shall be made in the U.S.A. with global components. It shall terminate with

a detachable 6 ft. IEC cord with NEMA 5-15P plug, and include universal mounting brackets

with hardware to mount to a rack, wall or desk.

RPC terminal

connects to a

remote switch

or sequencer.

Four

duplexes are

controlled by a

remote switch

or sequencer

connected to

the RPC terminal.

One duplex

is unswitched

(always on).

Detachable

power cord

Mounting brackets

Note: An external

power switch or se-

quencer is required

(order separately,

pg. 2).

INTERNAL USE ONLY: PN 24216

Lowell strives to provide accurate information while reserving the right to change specications and/or improve manufacturing methods without prior notication.

Spec 1108

Model ACS-1510-RPC | Rev. 12.20.23 | pg. 2/3

On: Green LED indicates AC power is applied to receptacles.

Power: Red LED indicates AC power is available.

Test: Test applies power to receptacles independent of remote switch or sequencer.

SW, Com: Connection between Switch and Common terminals activates internal relay and applies power to receptacles.

V+ Out: +24VDC output. Use only with RPS Series switches

Ex. Lowell RPS Series

REMOTE POWER CONTROL: Use low-voltage cable to connect the RPC terminal to an external switch or sequencer.

Remote

Switch

Connection to Remote Switch

(wall or rackmount):

RPC Terminal:

COMPATIBLE Switches & Sequencers: Order separately. See individual product spec sheets for more information.

Model No.

Description

RPSW-P

SPST switch w/maintained closure, one-gang white wall plate, rocker switch

RPSW-KP

SPST switch w/maintained closure, one-gang white wall plate, key switch

RPSB-R

SPST switch w/maintained closure, 1U rackmount panel, rocker switch

PRSB-KR

SPST switch w/maintained closure, 1U rackmount panel, key switch

SEQ-4

Four-step sequencer

SEQ-8

Eight-step sequencer

SEQR-4

Four-step rackmount sequencer w/rocker switch, 1U

SEQR-4K

Four-step rackmount sequencer w/key switch, 1U

SEQR-8

Eight-step rackmount sequencer w/rocker switch, 1U

SEQR-8K

Eight-step rackmount sequencer w/key switch, 1U

INTERNAL USE ONLY: PN 24216

Lowell strives to provide accurate information while reserving the right to change specications and/or improve manufacturing methods without prior notication.

Spec 1108

Model ACS-1510-RPC | Rev. 12.20.23 | pg. 3/3

UNIVERSAL MOUNTING BRACKETS: The brackets can be mounted exposed for easy access or concealed for a cleaner install. Includes

variety of hardware for versatile installation. (2) 1/4"-20 x 1/2" screws

(2) at nuts

(2) 10-32 x 1/2" screws

(2) cage nuts

(2) Brackets

RACK w/ ADJUSTABLE RAILS

(side mount : Mount to horizontal side )

supports with universal brackets, 1/4"-20

screws, flat nuts.

RACK w/ ADJUSTABLE RAILS

(rear mount): Mount to rear rail with univer-

sal brackets, 10-32 screws.

RACK w/ FIXED POSITION RAILS

(and rear Z-angle bracket): Mount to Z-an-

gle with universal brackets, 10-32 screws,

cage nuts.

T H I S

SPEC

SERIES SUMMARY

Power NEMA Chassis Chassis On/Off Surge Remote Mounting Country

Model No. Rating Receptacles Circuits Length Pro le Termination Switch Suppression Power Control Aids of Origin

ACS-1505-SW 15A 5 (15A) 1 12" Standard 6' Det. cord Yes --- --- Brackets U.S.

ACS-1505-SW-SD 15A 5 (15A) 1 12" Standard 6' Det. cord Yes 2-stage --- Brackets U.S.

ACS-1506 15A 6 (15A) 1 20" Low 6' Fixed cord --- 1-stage --- Clips China

ACS-1506-WW 15A 6 (15A) 1 12" Low 6' Fixed cord --- --- --- Screws U.S.

ACS-1507 15A 7 (15A) 1 12" Low 6' Det. cord --- --- --- Screws U.S.

ACS-1512 15A 12 (15A) 1 32" Low 12' Fixed cord --- 1-stage --- Clips China

ACS-1524 15A 24 (15A) 1 60" Low 12' Fixed cord --- 1-stage --- Clips China

ACS-1524-2C 15A 24 (15A) 2 70" Low Pigtail leads --- --- --- Clips China

ACS-2012 20A 8 (15A) + 4 (20A) 1 32" Low 12' Fixed cord --- 1-stage --- Clips China

ACS-2024 20A 16 (15A) + 8 (20A) 1 70" Low 12' Fixed cord --- 1-stage --- Clips China

ACS-2014-HW 20A 14 (20A) 1 30" Standard 6' Conduit --- --- --- Brackets U.S.

ACS-2014-2C-HW 20A 8 (15A) + 6 (20A) 2 30" Standard 6' Conduit --- --- --- Brackets U.S.

ACS-2020-6C-HW 20A 20 (20A) 6 60" Standard 6' Conduit --- --- --- Brackets U.S.

ACS-2020-IG-6C-HW 20A 20 (I.G. 20A) 6 60" Standard 6' Conduit --- --- --- Brackets U.S.

ACS-2020-IG-10C-HW 20A 20 (I.G. 20A) 10 60" Standard 6' Conduit --- --- --- Brackets U.S.

ACS-2024-2C 20A 24 (20A) 2 70" Low Pigtail leads --- --- --- Clips China

ACS-1510-RPC 15A 10 (15A) 1 30" Standard 6' Det. cord --- --- Yes Brackets U.S.

ACS-2010-RPC-HW 20A 10 (20A) 1 30" Standard 6' Conduit --- --- Yes Brackets U.S.

ACS-2018-5C-RPC-HW 20A 18 (20A) 5 60" Standard 6' Conduit --- --- Yes Brackets U.S.

ACS-2018-5C-RPCP-HW 20A 18 (20A) 5 60" Standard 6' Conduit --- 1-stage Yes (P) Brackets U.S.

Chassis Pro le = Standard pro le (2" x 2"), Low pro le (1.625" x 1.375")

Termination = Det. cord (detachable cord), Fixed cord (cord is attached–cannot be removed), Conduit (non-metallic  exible whip w/pigtail leads), Pigtail leads (leads at ends of chassis—no whip)

Switch = Yes (On/off rocker switch)

Surge Suppression = 1-stage (basic surge protection), 2-stage (surge protection with backup)

Remote Power Control = Some receptacles are controlled by a remote switch or sequencer (ordered separately); (P) indicates compatibility with Lowell P-Series pass-through sequencers.

Mounting Aids = Brackets (multi-hole brackets with hardware), Clips (clips and screws with wire tires), or Screws (power strips can mount to rear of US or USV Series shelves).