Lotronic ATM8000BT Handleiding

Lotronic Receiver ATM8000BT

Lees hieronder de 📖 handleiding in het Nederlandse voor Lotronic ATM8000BT (27 pagina's) in de categorie Receiver. Deze handleiding was nuttig voor 40 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/27

©Copyright LOTRONIC 2016 ATM8000BT 1

HIFI STEREO AMPLIFIER WITH BLUET OOTH FUNCTION

AMPLIFICATEUR HIFI STEREO AVEC FONCTION BLUETOOTH

HIFI STEREOVERSTÄRKER MIT BLUETOOTH FUNCTION

HIFI STEREOVERSTERKER MET BLUETOOTH FUNCTIE

AMPLIFICADOR HIFI STEREO COM A FUNÇÃO BLUETOOTH

HIFI STEREO OJAČEVALEC Z BLUETOOTH FUNKCIJO

AMPLIFICATOR DE PUTERE PROFESIONAL CU FUNCTIE BLUETOOTH

ATM8000BT

GB - USER

MANUAL

F - MANUEL D’UTILISATION

D - BEDIENUNGSANLEITUNG

NL – HANDLEIDING

E – MANUAL DE USO

P - MANUAL DE INSTRUÇÕES

SLO - NAVODILA ZA UPORABO

RO - MANUAL DE UTILIZARE

Imported from China by

LOTRONIC SA

Avenue Zénobe Gramme, 9

1480 SAINTES

Belgium

©Copyright LOTRONIC 2016 ATM8000BT 2

SAFETY RECOMMENDATIONS

• Before using the device, please check it for any possible damages. In case of damage do not operate it.

• Unplug the UNIT if you do not use it for a certain time.

• Do not expose the unit to mechanical stress and humidity.

• Ensure sufficient ventilation around the unit. Do not cover the device and protect it from direct solar radiation.

• Clean the device with a dry and soft cloth only.

• Caution! Should the device itself get damaged, please let the repair to the manufacturer or to a qualified service

agent.

• The unit must be connected to an earthed mains outlet only.

• Keep out of the reach of children

• DISCONNECT DEVICE

Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain

readily operable.

Features

• FM Tuner

• USB/SD/MP3 input

• Bluetooth function

• VFD to display track title, track no & elapsed time

• 2 microphone inputs with Echo & volum , bass & treble controle control

• O ptical input

• Headphone output

• Subwoofer output surround output &

Front panel

POWER: Press this button to power ON or OFF the unit

Play/Pause & RECORD: Press this button to play the signal from USB/SD, Bluetooth. Press again to pause. When the

input selected is TUNER/MP3/DVD/CD/VCD and there is an USB flash drive or SD card inserted into their respective slot,

pressing and holding this button will activate the recording function. Press this button and hold for several seconds and

the word “REC” will display on the screen. The unit will create a new file in the connected USB flash drive or SD card and

get ready to make a recording. At this point there is no actual recording yet. Press the button again and the unit will

start recording onto the USB flash drive or SD Card and the elapsed time and “REC” will display on the screen. Press the

button a third time to pause the recording and the word “REC” and the elapsed time displayed on the screen will start

flashing. Press again to continue the recording. Press and hold this button for several seconds to save the file and end

©Copyright LOTRONIC 2016 ATM8000BT 3

the recording and exit. If both USB flash drive and SD card are connected, the unit will begin recording onto the USB

flash drive. If the USB flash drive is full, remove it and then press the record button again to start another recording. The

unit will also be able to record the signal from microphone onto the USB flash drive or SD Card. When the recording

function is activated and there is a microphone connected and have it turned on, the unit will mix the signal from Tuner,

MP3 or DVD with the microphone’s into one track. If two microphone are connected and turned on, both signals from

them will be recorded and mixed into one track with the signal from Tuner, MP3 or DVD.

THE RECORDING FILE FORMAT IS .WAV.

THERE IS NO RECORDING FUNCTION WHEN INPUT SELECTED IS USB/SD/BLUETOOTH.

Previous: Press this button to go back to the beginning of the current track or move to the previous track.

Next: Press this button to move to the next track.

Repeat/Random: Press this button to select the repeat mode between REPEAT ONE, REPEAT ALL, RANDOM. The default

setting is repeat all.

Input: Press this button to cycle through the various inputs.

USB: Connect your USB flash drive here

SD: Connect your SD card here

MP3 input: Connect your MP3 here

EQ MODE: Press this button to cycle through -the pre set equalizer modes.

Audio Function: Press this button to switch the control mode between bass, treble & master volume

MIC1 & MIC2: Connect your microphones here

MIC VOL: Use this knob to adjust the microphone volume

MIC ECHO: Use this knob to adjust the echo of microphone.

MIC Bass: Use this knob to adjust the bass of microphone

MIC Treble: Use this knob to adjust the treble of microphone

Headphone Output: Connect your headphone here

Sub Output: Use this knob to adjust the sub output volume

Pre Output: Use this knob to adjust the pre output volume

Master Volume: Use this knob to control the master volume

OPERATION

Select a central location for the amplifier.

Connect the speaker wires (red & black) to the + and – terminals on the rear panel of the amplifier.

Connect the audio signal to the relevant sockets with the correct polarity.

Plug the mains lead in and switch the amplifier on once you have checked all connections.

Switch the audio sources on and adjust the master volume to the required level.

Karaoke: Plug a mic into MIC1 or MIC2 socket on the front panel. Before you use the mic, make sure that it is switched

off and the MIC volume button is set to the minimum. Connect the microphone, switch it on and adjust slowly the

volume and the echo.

If you don’t use the unit any longer, switch the amplifier off and disconnect it from the mains.

Signal Sources and their Connections:

• Connect an audio source relevant input to the terminals or a data storage unit to the USB-interface or insert a

SD-memory card in the suitable slot or activate the Bluetooth function on your smartphone.

• Select the active signal source by pressing the INPUT button until the desired input source is displayed.

• Use the MP3 CONTROL-function for controlling the files on a connected data storage unit.

• If you wish to use the karaoke function of this device insert one or two microphones into MIC1 and MIC2. Their ,

signals are going to the signal output too.

Product specificaties

Merk:	Lotronic
Categorie:	Receiver
Model:	ATM8000BT
Kleur van het product:	Zwart
Ingebouwd display:	Ja
Gewicht:	6200 g
Breedte:	430 mm
Diepte:	305 mm
Hoogte:	80 mm
Gewicht verpakking:	7000 g
Connectiviteitstechnologie:	Bedraad en draadloos
Aantal USB 2.0-poorten:	1
Gemiddeld vermogen:	360 W
Bedoeld voor:	Optreden/podium
Audio-uitgangskanalen:	- kanalen
Frequentiebereik:	20 - 20000 Hz
Signaal/ruis-verhouding:	76 dB
Totale harmonische vervorming (THD):	- procent
AC-ingangsspanning:	220-240 V
AC-ingangsfrequentie:	50 - 60 Hz
Input sensitiviteit:	450 mV
Piekvermogen per kanaal:	- W
Synchronisatie ingangsimpedantie:	8 Ohm