Lorus R2302HX9 Handleiding
Lees hieronder de 📖 handleiding in het Nederlandse voor Lorus R2302HX9 (2 pagina's) in de categorie Klok. Deze handleiding was nuttig voor 38 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/2
C H A R A C T ERI S T I C S
1. Time/ calendar disp lay : Hour, minut e,
second, month, date and day of the week
2. Time indication: 12-hour display format with
PM indicator and 24-hour display format are
available.
3. Stopwatch: The stopwatch can measure
up to 23 hours 59 minutes and 59 seconds
in 1/100-second increm ents. Split t ime
measurement is available.
4. Alar m: The alarm can be set to sound at the
designated time on a 24-hour basis.
5. Chime: The chime can be set to sound ever y
hour on the hour with a single beep.
6. Countdown timer: T he countdown timer
can be set up to 23 hours 59 minutes and 59
seconds.
7. Illuminat ing light: The built -in elect ro-
luminescent (EL) light evenly illuminates the
display for easy viewing in darkness.
B U T T O N S A N D D I S P L AY S
HOW T O S ET T H E TI ME/ C ALEN D A R
H O W T O U S E T H E STOPWAT C H
The display mode changes in the following order
by pressing Button D.
1. Press Button C to change the display to the
TIME/CALENDAR SETTING mode. (The second
digits start flashing.)
2. Selection of the digits to be adjusted (flash-
ing) is made in the following order by pressing
Button D.
3. One digit (flashing) is advanced with each
press of Button B. (The digits except seconds
are advanced quickly by keeping Button C
pressed.)
• Second setting
Press Button B in accordance with a time
signal. The second digits are reset to “00”
and start counting immediately.
When the second digits count any number
from “30” to “59” and Button B is pressed,
one minute is added and the seconds are
immediately reset to “00.”
Choice of 12-Hour/24-Hour format
• The time display format in either 12-hour
indication or in 24-hour indication can be
selected alternately by pressing button B.
Under the 12-hour indication format, “PM”
mark appears in the afternoon, but no AM
mark appears in the morning. Under the 24-
hour indication for mat, no mark a ppears on
the display.
* Measurement and release of split time can be
repeated by pressing button C.
During the measurement, the STOPWATCH signal
keeps flashing.
Press Button D to return to the TIME/CALENDAR
mode.
H O W T O S E T A L A R M T I M E
Press Button D two times to go to the ALARM
mode. The ALARM mode indicator appears on
the display.
1. Press Button C to change the display to the
ALARM SETTING mode. The hour digits start
flashing.
2. Press Button B to set the hour digits. One digit
(flashing) is increased with each press of
Button B. The digits are advanced quickly by
keeping Button B pressed.
3. Press Button D to confirm the hour setting and
move on to the minute setting. The minute
digits start flashing.
4. Press Button B to set the minute digits. One
digit (flashing) is increased with each press
of Button B. The digits are advanced quickly
by keeping Button B pressed.
5. Press Button D to confirm the minute setting
and move on to the time zone setting.
6. Press Button B to select the time zone.
7. Press Button C to complete the alarm setting.
Press Button D to go to the STOPWATCH mode.
The STOPWATCH mode indicator appears on
the display.
STOPWATCH OPERATION
Standard Measurement
Split Time Measurement
BC C B D
Start Split Reset
Split
Release Stop
B B C
Start Stop Reset
NREZ009 5-2015
CAL. Z009 (R23 SERIES)
Press Button D to return to the TIME/CALENDAR
mode.
PM
i nd i c at o r
Hour
Da y of the week
Ch ime
s i gn al
St o pwat ch
s i gn al
Da t e
M in ut e
Se co nd
T imer
s i gn al
Al ar m s ig nal
B (ST AR T /S T O P)A (L IGH T )
D (M O DE ) C (S ET )
4. After all the adjustments are completed, press
Button C to return to the TIME/CALENDAR
mode.
T IM ER
T IM E/CALE ND AR ST O P WAT C H
A L AR M
SE CON D T IM E ZO NE
D
D
D
D
S EC O NDS
DAT E
12/24 -HO U R
F O RM AT
M O NT H
M IN UT E S
HO U R S
DAY O F T HE
WEE K
D
D
D
D
D
D
D
DATE SETTING MONTH SETTING
TIME/CALENDAR mode
12/24 FORMAT SETTING
DAY OF THE WEEK
SETTING
MINUTE SETTING
HOUR SETTING
SECOND SETTING
D
D
D
C
C
D
D
D
B
B
B
BB
B
B
D
ST O PWAT CH m od e
i nd i c at o r
ST O P WAT C H
s i gn al
D
B
C
NREZ009.indd 1 15/05/07 16:2
H O W T O USE T I M E R
E N G A G E M E N T / D I S E N G A G E M E N T
O F A L A R M & CHI M E
1. Press Button D two times to go to the ALARM
mode.
2. With each press of Button B, the alarm and
chime can be engaged or disengaged in
the following order. The ALARM singal and/
or CHIME sig nal appear on the display
accordingly.
Both alarm and chime
are engaged.
Only alarm
is engaged.
Only chime
is engaged.
Neither alarm nor
chime is engaged.
Press Button D three times to go to the TIMER
mode. The TIMER mode indicator appears on
the display.
1. Press Button C to change the display to the
TIMER SETTING mode. The hour digits start
flashing.
2. Press Button B to set the hour digits. One digit
(flashing) is increased with each press of
Button B. The digits are increased quickly by
keeping Button B pressed.
3. Press Button D to confirm the hour setting and
move on to the minute setting. The minute
digits start flashing.
4. Press Button B to set the minute digits. One
digit (flashing) is increased with each press of
Button B. The digits are increased quickly by
keeping Button B pressed.
5. Press Button D to confirm the minute setting
and move on to the second setting. The
second digits start flashing.
6. Press Button B to set the second digits in the
same manner as the hour and minute setting.
7. Pre ss Button C to com pl ete t he t ime r
setting.
3. Press Button D to return to the TIME/CALENDAR
mode.
Note: The alarm can be set only in one time zone.
How to stop the alarm while sounding
The alarm sounds for 10 seconds at the designated
time. To stop it manually while sounding, press any
Button.
TIMER OPERATION
1. Press Button B in the TIMER mode to start the
countdown timer.
2. Press Button B to stop the countdown timer.
3. To reset the timer, press Button C.
Press Button D to return to the TIME/CALENDAR
mode.
B B C
Start Stop Reset
Press Button D to return to the TIME/CALENDAR
mode.
T h e m ini a t ure ba t t e r y eithe r CR2 0 1 6 o r
CR2032, which powers your watch should last
approximately 2 years for CR2016 or 4 years for
CR2032. However, because it is inserted at the
factory, the actual life of the battery once in your
possession may be less than the specified period.
Be sure to replace the battery to prevent any
possible malfunction as soon as it runs down. To
replace the battery we recommend taking the
watch to a local watch repair shop.
Note: If the alarm is used for more than 20 seconds
a day and/or the illuminating light for more
than 8 seconds a day, the battery life may
be less than the specified period.
B AT T ERY C H A N GE
H O W T O S ET SEC O N D T I M E Z O N E
Press Button D four times to go to the SECOND TIME
ZONE. The SECOND TIME ZONE indicator appears
on the display.
1. Press Button C to change the display to the
TIME ZONE SETTING mode. The hour digits start
flashing.
2. Press Button B to set the hour digits. One digit
(flashing) is increased with each press of
Button B. The digits are increased quickly by
keeping Button B pressed.
3. Press Button D to confirm the hour setting and
move on to the minute setting. The minute
digits start flashing.
4. Press Button B to set the minute digits. The
minute digits are increased in 30-minute
increments.
5. Press Button C to complete the second time
zone setting.
H O W T O USE E L B A C K L I G H T
In any mode press Button A to illuminate the
display for about 3 seconds.
Note:
1. The backlight of the watch employs an
electro-luminescent (EL) light, which tends to
lose illuminating power after very long use.
2. The illumination provided by backlight may be
hard to see when viewed under direct sunlight.
SE CON D T IM E ZO NE
i nd i c at o r
C A R E OF Y O U R L O R U S WAT C H
• BATTERY
CAUTION
Do not expose the old battery to fire or
recharge it. Keep it at a place beyond
the reach of chil dren. If a child swallows
it, consult a doctor immediately.
• WATERRESISTANT
Co n di ti on
of u s e Ac c id en t al
con ta ct wit h
wa te r, s u ch
a s sp la s he s
a nd r a in
Swi m mi n g
a nd t a ki ng
a s ho wer
Ski n
d i v i n g
Sc u ba
d i v i n g
Indication
on the dial/
case back
No
I nd ic a t io n
* If your watch is 200 M/20 BAR, 100 M/10 BAR
or 50 M/5 BAR water resistant, it is so indicated
on the dial/case back.
• Donotoperatethebuttonswhenthewatchis
wet.
• Ifthewatchisexposedtosaltwater,rinseitin
fresh water and then wipe it thoroughly dry.
NO NO NO
YE S
YE S
YE S NO NO
YE S YE S NO
NO NO NO
YE S
WAT E R
R E SI ST A N T
WAT E R
R E SI ST A N T
(5 0M /5 B AR
)
WAT E R
R E SI ST A N T
100M /10 BAR
or above
(
NO
(
Caution:
Leather straps are not water resistant except
so indicated, even if the watch head is water
resistant.
• ALLERGICREACTION
Because the case and band touch the skin
directly, it is important to clean them regularly. If
not, shirt sleeves may be stained and those with
delicate skin may develop a rash. Please wear
the watch with some play to avoid any possible
allergic reaction. If you develop a rash on your
wrist, stop wearing and consult a physician.
• MAGNETISM
Your watch will not be affected by magnetism
generated by household electric appliances.
• SHOCKSANDVIBRATIONS
Your wat ch may be worn for normal sports
activities, but be careful not to drop it or hit it on
hard surfaces.
• TEMPERATURE
Your watch is preadjusted so that constant
accuracy may be insured at normal tem pera ture.
S E R V I C E
When your LORUS watch requires repair or
sevicing, please see the enclosed WARRANTY/
GUARANTEE.
Pr i nt e d i n C h i na
M IN UT E SET T ING( +3 0)
HOUR SET T I NG(+1)
T IM ER mod e indi cat or
B
C
B
B
C
D
D
M IN UT E SET T ING
HOUR SET T I NG
SE CON D SETTIN G
AL ARM mod e ind i ca t or
T I ME Z ONE SET T I NG MIN UT E SE T T IN G
HOUR SET T I NG
B
B
B
D
D
C
C
C
B
B
C
D
NREZ009.indd 2 15/05/07 16:2
Product specificaties
| Merk: | Lorus |
| Categorie: | Klok |
| Model: | R2302HX9 |
Heb je hulp nodig?
Als je hulp nodig hebt met Lorus R2302HX9 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Klok Lorus
15 Juni 2023
Handleiding Klok
- Klok Braun
- Klok IKEA
- Klok Casio
- Klok Fysic
- Klok Xiron
- Klok Accusplit
- Klok Ade
- Klok Alecto
- Klok Amplicom
- Klok Ascot
- Klok Audiovox
- Klok Auriol
- Klok Balance
- Klok Balance Time
- Klok BBrain
- Klok Dexford
- Klok Digi-tech
- Klok Ecom
- Klok Elro
- Klok Eurochron
- Klok Fisher Price
- Klok Geemarc
- Klok Gingko
- Klok Gira
- Klok Global Tronics
- Klok GlobalTronics
- Klok Glunz
- Klok Hager
- Klok Hama
- Klok Hermle
- Klok IHome
- Klok Irox
- Klok Karlsson
- Klok Kogan
- Klok Konig
- Klok Krontaler
- Klok La Crosse
- Klok Lenovo
- Klok Lexon
- Klok Livoo
- Klok Lydion
- Klok Marquant
- Klok Mebus
- Klok Mondaine
- Klok Muse
- Klok Nedis
- Klok Profile
- Klok Ranex
- Klok RCA
- Klok Salter
- Klok Sempre
- Klok Taylor
- Klok Techno Line
- Klok Technoline
- Klok TFA
- Klok Tronic
- Klok United Office
- Klok Velleman
- Klok Ventus
- Klok Vitek
- Klok Weinberger
- Klok Jacob Jensen
- Klok Jung
- Klok Oregon Scientific
- Klok McIntosh
- Klok Camry
- Klok ECG
- Klok Cresta
- Klok Citizen
- Klok Trevi
- Klok Zuiver
- Klok Chacon
- Klok Valcom
- Klok Dormakaba
- Klok AcuRite
- Klok ART
- Klok La Crosse Technology
- Klok AV:link
- Klok Elation
- Klok ASA
- Klok TFA Dostmann
- Klok Antelope Audio
- Klok Equity
- Klok DB Technologies
- Klok Focus Electrics
- Klok Pyramid
- Klok CyberData Systems
- Klok Electronics International
- Klok Antelope
- Klok Bearware
Nieuwste handleidingen voor Klok
27 Oktober 2024
6 September 2024
4 September 2024
4 September 2024
4 September 2024
4 September 2024
3 September 2024
3 September 2024
3 September 2024
3 September 2024