Linksys LAPAC1750PRO-EU Handleiding

Linksys Access point LAPAC1750PRO-EU

Lees hieronder de 📖 handleiding in het Nederlandse voor Linksys LAPAC1750PRO-EU (121 pagina's) in de categorie Access point. Deze handleiding was nuttig voor 50 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/121
LAPAC1750PRO
User Guide
ii
Table of ContentsLAPAC1750PRO Access Point Software User Manual
ii
Section 1: Getting Started 1. . . . . . . . . . . . . . . . . . . . . .
Administrators Computer Requirements . . . . . . . . . . . . . . .1
Wireless Client Requirements. . . . . . . . . . . . . . . . . . . . . . .2
Online Help, Supported Browsers, and Limitations . . . . . . . . .2
Dynamic and Static IP Addressing on the AP . . . . . . . . . . . . .3
Installing the Access Point . . . . . . . . . . . . . . . . . . . . . . . . .3
Configuring the Ethernet Settings. . . . . . . . . . . . . . . . . . . .5
Configuring IEEE 802.1X Authentication . . . . . . . . . . . . . . . .6
Configuring Security on the Wireless Access Point . . . . . . . . .6
Section 2: Viewing Access Point System Status . . . . . . . . 7
System Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Network Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Radio Statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Workgroup Bridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Associated Client. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
TSPEC Client Associations . . . . . . . . . . . . . . . . . . . . . . . . 15
TSPEC Status and Statistics . . . . . . . . . . . . . . . . . . . . . . . 16
TSPEC AP Statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Email Alert Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
System Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Section 3: Configuring the Access Point . . . . . . . . . . . . .19
Administration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Wireless . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Security. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
QoS and Access Control . . . . . . . . . . . . . . . . . . . . . . . . . 66
SNMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Captive Portal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Cluster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Section 4: Maintenance of the Access Point . . . . . . . . . 110
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
Table of Contents
1
Section 1: Getting StartedLAPAC1750PRO Access Point Software User Manual
1
Section 1: Getting Started
The LAPAC1750PRO Access Point provides continuous, high-speed access
between wireless devices and Ethernet devices. It is an advanced, standards-
based solution for wireless networking in businesses of any size. The access point
(AP) enables wireless local area network (WLAN) deployment while providing
state-of-the-art wireless networking features.
The access point works in Standalone Mode, which means it is an individual
access point in your network. You manage the device through a Web-based user
interface (UI) or SNMP (Simple Network Management Protocol.
This document describes how to perform the setup, management, and
maintenance of the access point in Standalone Mode.
Before you power on a new access point, review the following sections to
check required hardware and software components, client configurations, and
compatibility issues. Make sure you have everything you need for a successful
launch and test of your new or extended wireless network.
This section contains the following topics:
Administrator’s Computer Requirements
Wireless Client Requirements
Online Help, Supported Browsers, and Limitations
Dynamic and Static IP Addressing
Installing the Access Point
Configuring the Ethernet Settings
Configuring IEEE 802.1X Authentication
Configuring Security on the Access Point
To manage the access point by using the Web interface, the AP needs an IP
address. If you use VLANs or IEEE 802.1X Authentication (port security) on your
network, you might need to configure additional settings on the AP before it can
connect to the network.
NOTE:
The access point is not designed to function as a gateway to the Internet.
To connect your WLAN to other LANs or the Internet, you need a gateway
device.
Administrators Computer Requirements
The following table describes the minimum requirements for the administrator’s
computer for configuration and administration of the access point through a
Web-based user interface (UI).
Table 1: Requirements for the Administrators Computer
Required Software or
Component
Description
Ethernet Connection to
the Access Point
The computer used to configure the first access
point must be connected to the access point by
an Ethernet cable.
Wireless Connection to
the Network
After initial configuration and launch of the first
access point on your new wireless network, you
can make subsequent configuration changes
through the Administration Web pages using a
wireless connection to the internal network. For
wireless connection to the access point, your
administration device will need Wi-Fi capability
similar to that of any wireless client: a portable
or built-in Wi-Fi client adapter that supports one
or more of the IEEE 802.11 modes in which you
plan to run the access point.


Product specificaties

Merk: Linksys
Categorie: Access point
Model: LAPAC1750PRO-EU
Kleur van het product: Wit
Gewicht: 520 g
Breedte: 247 mm
Diepte: 238 mm
Hoogte: 43.3 mm
LED-indicatoren: Systeem
Stroom: 2 A
Plaatsing: Ceiling, Wall
Frequentieband: 2.412 - 2.462, 5.18 - 5.24, 5.745 - 5.825 GHz
Inclusief AC-adapter: Ja
Aantal Ethernet LAN (RJ-45)-poorten: 2
Bevestigingsmogelijkheid voor kabelslot: Ja
Kabelslot sleuf type: Kensington
Vermogensverbruik (max): 24 W
Certificering: FCC, CE, IC
Aansluiting voor netstroomadapter: Ja
Ethernet LAN, data-overdrachtsnelheden: 10,100,1000 Mbit/s
Netwerkstandaard: IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u
Ondersteunde beveiligingsalgoritmen: 802.1x RADIUS, WEP, WPA, WPA2
Antenne versterkingsniveau (max): 5.2 dBi
Temperatuur bij opslag: -20 - 70 °C
Intern: Nee
Web-gebaseerd management: Ja
Luchtvochtigheid bij opslag: 10 - 90 procent
Reset button: Ja
Maximale overdrachtssnelheid van gegevens: 1750 Mbit/s
2,4 GHz: Ja
5 GHz: Ja
Quality of Service (QoS): Ja
VLAN=ondersteuning: Ja
Wifi Multimedia (WMM)/(WME): Ja
Auto Wireless Distribution System (WDS): Ja
Power over Ethernet (PoE): Ja
Antennefuncties: Ingebouwde antenne
Aantal kanalen: 165 kanalen
Beheerprotocollen: HTTP/HTTPS, SNMP
Draadloze isolatie: Ja
AC-ingangsspanning: 12 V
Bedrijfstemperatuur (T-T): 0 - 35 °C
Relatieve vochtigheid in bedrijf (V-V): 10 - 85 procent
Aantal SSID-ondersteuningen: 16
Syslog: Ja

Heb je hulp nodig?

Als je hulp nodig hebt met Linksys LAPAC1750PRO-EU stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Access point Linksys

Handleiding Access point

Nieuwste handleidingen voor Access point

Vimar

Vimar 19195.B Handleiding

1 December 2024
Vimar

Vimar 20195.B Handleiding

1 December 2024
Vimar

Vimar 14195.SL Handleiding

1 December 2024
Vimar

Vimar 14195 Handleiding

1 December 2024
Vimar

Vimar 19195 Handleiding

1 December 2024
Vimar

Vimar 20195 Handleiding

1 December 2024
Vimar

Vimar 19195.M Handleiding

1 December 2024
Vimar

Vimar 20195.N Handleiding

1 December 2024
EQ-3

EQ-3 HMIP-HAP Handleiding

30 November 2024