LigoWave NFT 2N Handleiding

LigoWave Access point NFT 2N

Lees hieronder de 📖 handleiding in het Nederlandse voor LigoWave NFT 2N (32 pagina's) in de categorie Access point. Deze handleiding was nuttig voor 26 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/32

NFT series 7.3

User Guide

Revision 1.0

February 20, 2015

LigoWave Page 2

this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated

into any language in any form by any means without the written permission of LigoWave.

Notice

LigoWave reserves the right to change speciﬁcations without prior notice.

While the information in this manual has been compiled with great care, it may not be deemed an

assurance of product characteristics. LigoWave shall be liable only to the degree speciﬁed in the

terms of sale and delivery.

The reproduction and distribution of the documentation and software supplied with this product and

the use of its contents is subject to written authorization from LigoWave.

Trademarks

LigoWave logo is trademark of LigoWave LLC.

All other registered and unregistered trademarks in this document are the sole property of their

respective owners.

LigoWave Page 3

FCC warning

This equipment has been tested and found to

comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable

protection against harmful interference in a

residential installation. This equipment

generates, uses, and can radiate radio frequency

energy and, if not installed and used in

accordance with the instructions, may cause

harmful interference to radio communications.

However, there is no guarantee that interference

will not occur in a particular installation. If this

equipment does cause harmful interference to

radio or television reception, which can be

determined by turning the equipment oﬀ and on,

the user is encouraged to try to correct the

interference by one of the following measures:

 Reorient or relocate the receiving antenna.

 Increase the separation between the

equipment and receiver.

 Connect the equipment into an outlet on a

circuit diﬀerent from that to which the

receiver is connected.

 Consult the dealer or an experienced

radio/TV technician for help.

This device complies with Part 15 of the FCC

Rules. Operation is subject to the following two

conditions: (1) This device may not cause

harmful interference, and (2) this device must

accept any interference received, including

interference that may cause undesired operation.

FCC caution

To assure continued compliance, any changes or

modiﬁcations not expressly approved by the

party responsible for compliance could void the

user's authority to operate this equipment.

FCC radiation exposure statement

To comply with FCC RF exposure requirements

in section 1.1307, a minimum separation

distance of 3.9 feet is required between the

antenna and all occupational persons, and a

minimum separation distance of 8.7 feet is

required between the antenna and all public

persons.

CE mark warning

This is a Class A product. In a domestic

environment this product may cause radio

interference in which case the user may be

required to take adequate measures.

R&TTE compliance

statement

This equipment complies with all the

requirements of the Directive 1999/5/EC of the

European Parliament and the Council of 9 March

1999 on Radio Equipment and

Telecommunication Terminal Equipment and the

Mutual Recognition of their Conformity (R&TTE).

The R&TTE Directive repeals and replaces in the

directive 98/13/EEC (Telecommunications

Terminal Equipment and Satellite Earth Station

Equipment) As of April 8, 2000.

Safety

This equipment is designed with the utmost care

for the safety of those who install and use it.

However, special attention must be paid to the

dangers of electric shock and static electricity

when working with electrical equipment. All

guidelines of this manual and of the computer

manufacturer must therefore be allowed at all

times to ensure the safe use of the equipment.

EU countries intended for use

The ETSI version of this device is intended for

home and oﬀice use in Austria, Belgium,

Denmark, Finland, France (with Frequency

channel restrictions), Germany, Greece, Ireland,

Italy, Luxembourg, The Netherlands, Portugal,

Spain, Sweden and United Kingdom. The ETSI

version of this device is also authorized for use in

EFTA member states Iceland, Liechtenstein,

Norway and Switzerland.

EU countries not intended for use

None.

Product specificaties

Merk:	LigoWave
Categorie:	Access point
Model:	NFT 2N
Kleur van het product:	Wit
Gewicht:	450 g
Breedte:	180 mm
Diepte:	180 mm
Hoogte:	45 mm
LED-indicatoren:	LAN, Power, WLAN
Bedrijfsmodi:	Op handgreep
Frequentieband:	2.402 - 2.484 GHz
Inclusief AC-adapter:	Ja
Vermogensverbruik (max):	8 W
Certificering:	FCC/IC/CE
Modulatie:	16-QAM, 64-QAM, BPSK, CCK, COFDM, DBPSK, DQPSK, QPSK
Ethernet LAN, data-overdrachtsnelheden:	10,100,1000 Mbit/s
Netwerkstandaard:	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Ondersteunde beveiligingsalgoritmen:	WPA, WPA2
Antennas quantity:	6
Antenne versterkingsniveau (max):	3 dBi
Aantal gebruikers:	- gebruiker(s)
Ondersteunde netwerkprotocollen:	IPv6, IPv4
Draadloos LAN data-overdrachtsnelheid (max):	450 Mbit/s
Luchtvochtigheid bij opslag:	0 - 90 procent
Maximale overdrachtssnelheid van gegevens:	450 Mbit/s
2,4 GHz:	Ja
5 GHz:	Ja
Power over Ethernet (PoE):	Ja
Antennefuncties:	Ingebouwde antenne
Aantal kanalen:	2 kanalen
Bandbreedte:	2.4 GHz
WAN-poort:	Ethernet (RJ-45)
Beheerplatform:	Wireless Network Management System (WNMS)
Beheerprotocollen:	SNMP v1/2c/3
Zendvermogen:	20 dBmW
Hoog vermogen:	Ja
AC-ingangsspanning:	100 - 240 V
Bedrijfstemperatuur (T-T):	-10 - 55 °C
Type antennerichting:	Omni-directioneel