LevelOne IES-0610 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor LevelOne IES-0610 (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 15 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
witch -40 to 75C
Guide
v1.00 - 1401
IES-0610 Page 1
Overview
LevelOne IES-0610 Industry Ethernet Switch provides 4 PoE ports of
10/100/1000Base-T plus 1 ports of 10/100/1000Base-T Ethernet plus
2 ports of Gigabit SFP to enable high speed network at mission-
critical environment. The compact metal housing is designed for
desktop space saving, plus the clearly visible status LEDs provide
simple monitoring of port link activity. Moreover, the SFP slots
support pluggable modules that enabling you to choose from a
variety of transceivers.
High Reliability
All components are built to withstand harsh environment
applications without compromise where humidity, temperature
variation and even shock vibration are concerns, including Electric
& Utility, Critical Infrastructure, Transportation and Surveillance
Security. This device operates under -40 to 75 Celsius (-40 to 167
Fahrenheit) temperature.
Plug & Play
This unmanaged Industrial Ethernet Switch is designed for the
demanding industrial environments at businesses in need of
instant connectivity with no setup or configure required, truly plug
and play.
Power over Ethernet
This switch is Power Sourcing Equipment (PSE), and it is fully
complied with IEEE 802.3at PoE standard at maximum 30W power
budget per port. It helps to save infrastructure wiring costs
dramatically by eliminating electric wiring and less UPS needed.
Also, it is compatible with IEEE802.3af standard PD devices.
IES-0610 Page 2
Features
ï‚· Meets NEMA TS1/TS2 Environmental requirements such as temperature, shock,
and vibration for traffic control equipment
ï‚· Meets EN61000-6-2 & EN61000-6-4 EMC Generic Standard Immunity for
industrial environment
ï‚· Supports 1024 MAC addresses. Provides 1M bits memory buffer
ï‚· Supports IEEE802.3af PoE 15.4W and IEEE802.3at PoE+ 30W
ï‚· Provides one combo Gigabit ports. SFP socket for Gigabit fibre optic expansion.
ï‚· Store-and-forward mechanism. Full wire-speed forwarding rate.
ï‚· Power Supply: 47~57VDC Terminal Block power input.
ï‚· 5.52W power consumption 48VDC @ 0.12A (unit only)
 -40 to 75 (-40 to 167 ) operating temperature range. ℃ ℃ ℉ ℉
 Tested for functional operation @ -40 to 85 (-40 to 185 ). ℃ ℃ ℉ ℉
ï‚· Hardened metal case
Package Contents
 IES-0610
 Quick Installation Guide
IES-0610 Page 3
LED Status
LED Status Description
PWR 1, 2
Steady Power On
Off Power Off
P1 ~ P4
Steady PD is connected
Off No PD is connected
10/100/1000Base-TX (T1 ~ T5)
LNK
Steady Network connection established
Flashing Transmitting or Receiving data
SPD
Steady Power Device (PD) is connected
Off Power Device (PD) is disconnected
1000Base-SFP
F5
Steady Network connection established
Flashing Transmitting or Receiving data
F6
Steady A valid connection established
Off No connection is being established
IES-0610 Page 4
Power Input
Terminal Block
IES-0610 Page 5
DIP Switch
DIP1 DIP1
OFF T5 (RJ45) enabled 1000M
ON F5 (SFP) enabled 100M
Note: Port5 (T5 & F5) is shared combo port, enable either RJ45 or
SFP via DIP1 switch
IES-0610 Page 6
DIN Rail Mount
ï‚· Assembly: Place the switch on the DIN rail from above using the
slot. Push the front of the switch toward the mounting surface
until it audibly snaps into place
ï‚· Start-up: Connect the supply voltage to start up the switch via
the terminal block (or DC JACK)
ï‚· Dismantling: Pull out the lower edge and then remove the switch
from the DIN rail.
IES-0610 Page 7
10/100/1000Base-TX Pin
The following lists the pin-out of 10/100/1000Base-TX ports
Pin 10/100 DC & Data 1000 DC & Bi-Data
1 Rx + DC + TxRx A + DC +
2 Rx - DC + TxRx A - DC +
3 Tx + DC - TxRx B + DC -
4 unused TxRx C +
5 unused TxRx C -
6 Tx - DC - TxRx B - DC -
7 unused TxRx D +
8 unused TxRx D -


Product specificaties

Merk: LevelOne
Categorie: Niet gecategoriseerd
Model: IES-0610
Kleur van het product: Zwart
Gewicht: 720 g
Breedte: 40 mm
Diepte: 105 mm
Hoogte: 38 mm
Gewicht verpakking: 120 g
Breedte verpakking: 215 mm
Diepte verpakking: 165 mm
Hoogte verpakking: 65 mm
LED-indicatoren: Activity, Link, Power
Type verpakking: Doos
Snelstartgids: Ja
Land van herkomst: Taiwan
Ingangsspanning: 48 - 55 V
Netwerkstandaard: IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Temperatuur bij opslag: -40 - 85 °C
Stroomspanning bescherming: Overload, Reverse polarity
Luchtvochtigheid bij opslag: 5 - 95 procent
Ophangsysteem voor aan de muur: Ja
Auto MDI/MDI-X: Ja
Power over Ethernet (PoE): Ja
Switchingcapaciteit: 12 Gbit/s
MAC-adrestabel: 1024 entries
10G support: Nee
Datastroombeheer: Ja
Aantal basis-switching RJ-45 Ethernet-poorten: 4
Type basis-switching RJ-45 Ethernet-poorten: Gigabit Ethernet (10/100/1000)
Packet buffergeheugen: 1 MB
Full duplex: Ja
Auto-negotiation: Ja
Stroomverbruik (typisch): 6 W
Bedrijfstemperatuur (T-T): -40 - 75 °C
Relatieve vochtigheid in bedrijf (V-V): 5 - 95 procent
Code geharmoniseerd systeem (HS): 85176990
Totaal Power over Ethernet (PoE)-budget: 126 W
Aantal Power over Ethernet plus (PoE +)-poorten: 4
Jumbo frames: 10000
Aantal geïnstalleerde SFP modules: 1
DIN rail bevestiging: Ja
Store-and-forward: Ja
Vermogen per poort Power over Ethernet (PoE): 30 W
Klemmenblokpoort: Ja
Aantal Combo SFP-poorten: 1
Packet forwarding rate (10 Mbps): 14880 pps
Packet forwarding rate (100 Mbps): 148000 pps
Packet forwarding rate (1 Gbps): 148800 pps

Heb je hulp nodig?

Als je hulp nodig hebt met LevelOne IES-0610 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd LevelOne

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd