Lenmar BCR10 Handleiding

Lenmar Batterij-oplader BCR10

Lees hieronder de 📖 handleiding in het Nederlandse voor Lenmar BCR10 (4 pagina's) in de categorie Batterij-oplader. Deze handleiding was nuttig voor 54 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

OmniSource®® 10•12

BATTERY CHARGER and RECONDITIONER

BCR10

OWNER'S MANUAL

Please read before using this system.

Thank you for purchasing LENMAR's OmniSource®® 10•12. The OmniSource 10•12 can charge

virtually all 9.6V, 10V, and 12V full size and VHS-C camcorder batteries. The OmniSource 10•12

is an AC/DC Battery Charger and Reconditioner. Two methods of charging are available. The

Discharge/Charge mode for nickel cadmium batteries will automatically discharge and then quick

charge batteries. The discharging process eliminates any battery memory, thereby allowing the

battery to be charged to its maximum capacity. The second method is the quick charge function,

which is especially useful for NoMEM™ batteries and lead acid batteries where discharging

should be avoided.

The OmniSource 10•12 allows you to Charge or Discharge/Charge your batteries through a

standard household AC outlet or on the road from a 12V cigarette lighter socket.

The OmniSource 10•12 is a complete, convenient system to refresh and charge your full size and

VHS-C camcorder batteries.

bbyy tthhee MMaatteeeell EEnnvviirroonnmmeennttaall JJuussttiiccee FFoouunnddaattiioonn aaggaaiinnsstt mmuullttiippllee eelleeccttrroonniiccss aanndd aapppplliiaannccee mmaannuuffaaccttuurreerrss..

WWaasshh hhaannddss aafftteerr hhaannddlliinngg..

1. If you wish to automatically discharge and recharge a battery, engage the battery onto the OmniSource base unit.

(Refer to Battery Placement and Compatibility List to determine which side your battery fits on.)

2. Plug either the AC (110V) or DC (Cigarette Plug) into "input" jack. The Red LED light will illuminate to indicate power

is on.

3. Push the Discharge button. The Yellow LED light will illuminate to indicate the battery is being reconditioned.

Memory, if any is being eliminated. Important: Do not discharge NoMEM™ or Lead Acid Batteries.

4. When the battery is fully discharged, the Yellow LED light will go out and the Green LED will illuminate, indicating

battery is now being charged.

5. When the Green LED light goes out, it indicates battery is fully charged. It is recommended to remove battery from

unit.

6. Battery is now ready to be used.

NOTE: Unit will buzz if discharge button is pushed and battery is not properly connected.

1. Plug either the AC (110V) or DC (Cigarette Plug) into "input" jack. The Red LED light will illuminate to indicate power

is on.

2. Engage the battery onto the OmniSource base unit. (Refer to Battery Placement and Compatibility List to determine

which side your battery fits on.)

3. The Green LED light will illuminate, indicating battery is now being charged.

4. When Green LED light goes out, it indicates battery is fully charged. Remove battery from unit.

55.. BBaatttteerryy iiss nnooww rreeaaddyy ttoo bbee uusseedd..

DISCHARGE ONLY FEATURE - FOR NiCd BATTERIES ONLY

To discharge a battery without automatically charging, does not require a power source.

1. Engage the battery onto the OmniSource base unit. (Refer to Battery Placement and Compatibility List to determine

which side your battery fits on.)

2. Push the discharge button. The Yellow LED light will illuminate to indicate battery is being reconditioned. Memory, if

any is being eliminated.

3. When the battery is fully discharged, the Yellow LED light will go out.

4. Remove the battery from the unit.

NOTE: Unit will buzz if discharge button is pushed and battery is not properly connected.

BATTERY PLACEMENT AND BATTERY COMPATIBILITY LIST

Slot "A" ON TOP

Manufacturer Battery Model #

Canon: BP-101A, BP-100, BP30/A, BP-31, BP-32, BT-30A

Curtis

Mathes:

EA13P60, VSBS0016

GE: 1CVA125, 1CVA155, 1CVA156

Lenmar: PAN88, PBA50, LBA6500

Magnavox: AR8378BK01, V80039BK01, V80086BK01,

V80096BK01

Panasonic: LCS2012, LCS2312, PV-BP50, PV-BP88, VW-VB30,

VW-VB31, VW-VBM7E

Quasar: VE-257, VE-258, VE-55A

Sears: 5399, 53991

Sylvania: AR8378BK01, AR8395BK01, V80039BK01,

V80086BK01, V80096BK01

Zenith: VAC-904, VAC-907

NOTE: May fit additional makes and models of equivalent 12V batteries.

For placement onto unit, slide the battery in the angl going in first, facing down. ed slot with contacts side

SIDE "A FOR HITACHI/RCA 10V VHS-TYPE

Battery Model #

GE: 1CVA145, 1CVA150

Hitachi: VMBP61A, VMBP63A, VMBP64, VMBP65, VMBP66,

VMBP67

JVC: BN-V5GU, BN-V6GU, VN-V7GU

Lenmar: JBC752, JBC962S, RBV96S, RHB65, RHB66

Magnavox: V80076BK01, V80085BK01

Minolta: VBC-166, VBP-100, VBP-101, VBP-101, VBP-160, VBP-

161, VBP-165, VBP-166, VBP-500, VBP-501

Panasonic: PV-BP10, PV-BP11, PV-BP12, VW-VBC1E, VW-VBC3

Quasar: VE-255, VE-256

RCA: AV-650, BP-96, CB-096, CB-096FL, EP096FL

Sears: 53981, 53982

Sylvania: V80076BK01, V80085BK01

Toshiba: BP-11, BP-12, TBP-7U, TBP-8U, TBP-9U

Zenith: VAC-402, VAC-403, VAC-415, VAC-445, VAC-620 thru

VAC-795

NOTE: May fit additional makes and models of equivalent 9.6V and 10V batteries.

For placement onto unit, align battery tabs to the tabs on the charger rail, closest to the back of charger. Slide the battery

back all the way.

SIDE "B" FOR HITACHI/SHARP 12V VHS TYPE

Manufacturer Battery Model #

RCA: CBC-060, CBC-120

Hitachi: VMPB51, VMBP52

Phillips: SBV1552H01

Realistic: P16BP63, P16BT22

Sharp: BT-21, BT-22

Lenmar: HBC520 and SBT22

NOTE: May fit additional makes and models of equivalent 12V batteries.

ADAPTER PLATE

Battery Model #

Goldstar: VM-BP2M, BP-151

Hitachi: VMBP21, VMBP22

Lenmar: HBV522

Memorex: VM-BP21M

Minolta: BP-1001, BP-1002

Mitsubishi: HS-F10UR

Pentax: PVBT11, PVBT12

RCA: AV120, CB-060, CB-120

Samsung: V-NB3

Sears: 53994, 53995

Zenith: VAC-901

Slide Adapter Plate over Side "B". Align back tabs of plate with back tabs of charger. Slide plate all the way forward.

Align battery on tabs of plate. Slide battery all the way forward.

Product specificaties

Merk:	Lenmar
Categorie:	Batterij-oplader
Model:	BCR10
Kleur van het product:	Zwart
Oplaadtijd:	120 min
Capaciteit van de accu/batterij:	2000 mAh
Ingangsspanning:	110 V
Gewicht (imperiaal):	1.96 lbs
Gewicht verpakking (imperiaal):	2.16 lbs
Chemische samenstelling:	Ni-CD, NiMH