LED Lenser H14.2 Handleiding

LED Lenser Zaklamp H14.2

Lees hieronder de 📖 handleiding in het Nederlandse voor LED Lenser H14.2 (41 pagina's) in de categorie Zaklamp. Deze handleiding was nuttig voor 70 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/41

LED LENSER® * h14.2

Operating instructions

Bedienungsanleitung

Instrucciones de uso

Mode d‘emploi

Gebruiksaanwijzing

Istruzioni per l‘uso

Руководство по эксплуатации

수동

取扱説明書

手册

LED LENSER® * h14.2

English ........................................... 02-04

Deutsch .......................................... 05-08

Español .......................................... 09-11

Français ......................................... 12-15

Nederlands................................... 16-18

Italian.............................................. 19-22

Pусский ......................................... 23-26

한국어 ............................................ 27-29

日本語 .................................. 30-31

中文 ...................................... 32-33

We are delighted that you have purchased one

of our products.

These are usage instructions to help you

familiarize yourself with your new purchase.

All the documents accompanying the product

must be read attentively before using the

product, stored for future use and, if the product

is transferred to a third party, the documents

should be handed over as well. This ensures

that maximum benefit is drawn from the product

and questions from users can be resolved when

they arise.

Above all, comply with the warnings and safety

instructions and dispose of the packaging

material properly.

Additional information for H14.2 with TEST IT

function.

Your LED LENSER® H14.2 headlamp comes with

a TEST IT function (item no. 7397). This allows

users to test the brightness while the product

is still in the packaging. To test, simply push

the yellow TEST IT button on the front of the

package. Please do not look directly into the

light when testing.

The TEST IT button is connected to the battery

housing of the H14.2 via two wires and should

be removed prior to use.

To remove the TEST IT button and wires, open

the battery compartment and separate the two

TEST IT button wires from the battery housing

by pulling it until it releases from the battery

housing. Close the battery box. Please dispose

of and recycle the packaging and TEST IT button

with the wires according to the local regulations.

Product

7299, LED LENSER® H14.2 (gift box)

7399, LED LENSER® H14.2 (Blister with TEST IT

function)

Version of the operating manual: V 1.6

1. Battery set:

4 X AA / LR6 (1.5 V DC)

2. Turning it ON and OFF

There are two switches on the H14.2. The

front switch is located in the right side of the

headlamp housing. This button is used to turn

the H14.2 ON/OFF. It is also used to activate

the various Light Programmes and Lighting

Functions (see section 5), and to active the

transport lock functions (see section 6).

The multi-function wheel switch is located

on the back in the upper part of the battery

compartment. This allows you to adjust the

brightness and flash rate infinitely and to

change the light modes programmes (see

section 5)

3. Focus

In the front, narrower region of the headlamp

housing is the reflector lens located. This lens

focused the light of the white LED through our

patented "Advanced Focus System".

The reflector lens is held by an alu. housing.

You can pull and push the front housing by two

fingers, and thus adjust the focus quickly and

easily. This is our speed Focus, which allows the

adjustment of the light beam’s focus.

You also can adjust the hinge of the headlamp,

depending on whether you want to illuminate an

area in the distance or in front of you. For this,

you simply tilt the part of the lamp head, which

containing the reflector lens and the white LED.

The gradual detent allows also intermediate

positions.

4. Smart Light Technology (SLT)

Smart Light Technology (SLT) is a programme

that consists of a computer-optimized

microcontroller which allows our products to

have various lighting functions. The H14.2 is

equipped with this technology and is therefore

able to use various Light Programmes and Light

Functions (see section 5) with an interface that

is simple and user-friendly. Pressing the front

switch on the lamp head allows you to activate

the following Light Functions: On (‘Power’) –

Off, ‘Low Power’, ‘Boost’, ‘Dim’ and ‘Blink’. Using

the multi-function wheel switch on the back,

the light intensity of the ‘Dim’ function and

flashing rate of the ‘Blink’ function are infinitely

adjustable by easily rotating the switch.

5. Light programmes and light functions

The H14.2 is equipped with one LED (light

emitting diode). The white LED is very strong

and ideal for normal use. For example if the

Speed Focus or the adjustment of the angle of

light beam to the horizontal should be used. It is

not suggested to use when the user has adapt

to the surrounding dark environment.

After selecting one of the three light

programmes (1. ‘Easy Low’, 2. ‘Easy Power’ or 3.

‘Signal’) and one of the light functions, there are

three sub-modes under each light programme

(‘Power’, ‘Low Power or 12 Hz ‘Signal’), The

default mode is the Light Program, ‘Easy Low’.

The function below can only be activated when

the product is not connected to the adaptor and

the transport lock function is deactivated. To

switch between the three Light Programmes,

you have to press the multi-function wheel

switch (rotary switch) on the back of the

battery compartment for at least 5 seconds.

The light indicates correct activation with a

corresponding number of flashes (1 x, 2 x or 3 x).

Immediately after the chosen light programme

is set, the lamp is switched on.

30-second BOOST mode

If the front cap switch is pressed for about 3

seconds when the product is not connected to

the adaptor and transport mode is deactivated,

the product will go into BOOST mode. Please

release the switch when you enter into Boost

mode. If you push the switch for longer than

5 seconds, the product will go into transport

lock mode (please see section 6). After being in

BOOST mode for 30 seconds, the product will

automatically return to the previous function

setting.

5.1 Light program – Easy Low: In this Light

program, the lamp starts up with the Light

Function ‘Low Power’ (dimmed light) activated

when the front switch is pressed once. Press

the front switch twice within 2 second to turn on

the Light Function ‘Power’ (full light). Another

press will turn off the lamp.

5.2 Light program – Easy Power: In this Light

English | Page 02-05 GB

Product specificaties

Merk:	LED Lenser
Categorie:	Zaklamp
Model:	H14.2
Kleur van het product:	Zwart
Gewicht:	340 g
Aantal lampen:	1 lampen
Soort lamp:	LED
Vermogen lamp:	- W
Ondersteund aantal accu's/batterijen:	4
Lichtstroom:	350 lm
Type batterij:	AA
Type zaklamp:	Lantaarn aan hoofdband
Lichtbundelafstand (max):	260 m
Diameter hoofd:	37 mm