La Crosse Technology WT-3128U-WH Handleiding
La Crosse Technology
Klok
WT-3128U-WH
Lees hieronder de 📖 handleiding in het Nederlandse voor La Crosse Technology WT-3128U-WH (6 pagina's) in de categorie Klok. Deze handleiding was nuttig voor 33 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/6
1
RADIO CONTROLLED ANALOG CLOCK
INSTRUCTION MANUAL
Quick Setup Instructions
Welcome to the world of atomic timekeeping technology. We hope you will enjoy
the convenience of never having to set your clock again and the confidence of
knowing exactly what time it is.
• Insert 1 new AA, LR6 1.5 volt ALKALINE battery into the digital clock battery
compartment (the lower battery compartment) according to the polarity
marked on the case, then 1 new battery AA, LR6 1.5 V into the analog clock
battery compartment according to the polarity marked on the case.
• Once the battery is installed, the clock will begin searching for a signal. For
the initial setting, it is recommended to stand the clock in an upright position
near a window. Within five minutes the clock will either receive the WWVB
signal and set itself to the exact time (for the default Pacic Time Zone), or it
will determine that the signal is not receivable at its current location and time
of day. The clock will fast-forward the hands to the 4, 8, or 12 o’clock
position immediately and search for WWVB at specific time each day until a
signal is received.
Note: If the time is manually set, the clock will continue to periodically
search for a signal and automatically reset the hands when the signal is
received.
• Once the clock has received the WWVB signal, press the time zone button
to select your time zone. If you are in the Pacific Time Zone, no change is
needed and you are ready to hang your clock.
If you are not in the Pacific Time Zone, select your time zone by pressing
one of the four time zone buttons PT-Pacific Time, MT-Mountain Time, CT-
Central Time, ET-Eastern Time and holding this button down for 5 seconds.
If multiple buttons are pressed, the clock will set to the time zone selected
last. If no time zone is selected the clock will default to Pacific Time. If you
live in an area that does not recognize DST (Arizona) you must press the
DST button (unmarked – just above and between the Central and Eastern
time zone buttons) for one second to deactivate your clock’s DST program.
For time zones outside of PT, MT, CT or ET you must manually set the time
using the Manual Time set button on the back of the movement. (See
instructions below).
Please Note: WWVB time will over ride a manual setting.
BATTER
Y
COMPARTMENT
FOR THE
DIGITAL CLOC
K
BATTERY
COMPARTMENT
FOR THE
A
NALOG CLOCK
2
MANUAL TIME SET
BUTTON
PACIFIC TIME
CENTRAL TIME
For a better understanding of how and why your clock works please continue
reading.
NOTHING IS MORE PRECISELY MEASURED THAN TIME!
And nothing keeps track of time more precisely and trouble free than La Crosse
Technology®® atomic clocks.
Since the beginning of time, man has been fascinated with the measurement of
time and has devised more accurate machines to measure time. Today, time is
precisely measured in the United States by the most accurate clock in North
America, the Atomic Clock of the US National Institute of Standards and
Technology, Time and Frequency Division in Boulder, Colorado. A team of atomic
physicists continually measures every second of every day to an accuracy of ten
billionths of a second per day. These physicists have created an international
standard, measuring a second as 9,192,631,770 vibrations of a Cesium 133 atom
in a vacuum. This atomic clock regulates the WWVB radio transmitter located in
Fort Collins, Colorado. From here the exact time signal is continuously
broadcasted throughout the United States at 60 kHz to take advantage of stable
long wave radio paths found in that frequency range. Radio waves at these low
frequencies use the earth and the ionosphere as a wave-guide and follow the
curvature of the earth for long distances.
The built in antenna system in your clock will receive the WWVB signal anywhere
in North America within 2000 miles of Fort Collins where long-wave radio
reception is undisturbed. A microprocessor activates the receiver and processes
the time signal from Fort Collins overnight.
Through the radio signals, La Crosse Technology® atomic clocks always keep
precise time. The changeover from standard time to daylight saving time, and vice
versa, takes place automatically with the same precision.
ADDITIONAL DETAILS
• The La Crosse Technology® atomic clock is designed for indoor use.
• For indoor locations, select a location to place your radio controlled clock
where it will be at least six feet away from a TV, computer, air conditioner or
other household electrical appliances.
• The optimal location is near a window. Windows facing Colorado provide the
best signal.
• Do not submerge clock in water.
• Extreme temperatures, vibration, and shock should be avoided to prevent
damage to the clock.
• The WWVB time signal will easily penetrate masonry and wood framed
buildings.
• The WWVB signal will penetrate almost every residential building and most
steel buildings if they have adequate windows. It is not possible, however, for
the WWVB signal to penetrate most indoor shopping malls and rooms in the
center of large office buildings that do not have windows.
• In buildings that WWVB cannot penetrate you may set the time using the
manual time set button. When the clock receives the WWVB signal it will
automatically set the hands to the exact time.
BATTERY
COMPARTMENT
EASTERN TIME
MOUNTAIN TIME DST ON/OFF BUTTON
3
La Crosse Technology® atomic clocks do not receive or process radio
controlled time signals from Germany’s DCF 77, Japan’s J Ga AS, or
England’s MSFs atomically regulated transmitters. La Crosse Technology®
atomic clocks can be manually set and used anywhere.
Please Note: WWVB time will over ride a manual setting.
For more information on the NIST and radio controlled time, see
www.boulder.nist.gov/timefreq/.
TO SET THE TIME USING THE MANUAL TIME SET BUTTON
In some cases, the La Crosse Technology® atomic clock may not receive the
WWVB signal due to atmospheric disturbances or hard to reach locations such as
inside shopping malls. In this case, please use the Manual Time Set button,
located at the back of the clock to manually set the time. To do this:
1. Remove the battery and press the Manual set button 10 times.
2. Insert 1 new AA Alkaline battery.
3. Press and hold the Manual Set button until the second hand of the clock
moves to the 12 position.
4. Release the Manual Set button and again press and hold the Manual Set
button. The minute and hour hands will fast-forward while the button is held.
5. Keep holding the Manual Set button until the time is set as required.
6. Release the button. About 3 seconds later, the second hands will start to
move and the clock is now running with manual time.
Note:
When the clock displays manual time, it will continue to try to receive the WWVB
signal at each of the even numbered hours: 0:00, 2:00, 4:00, 6:00 … 20:00 &
22:00.
DIGITAL CLOCK
1. Remove the battery cover at the back of the clock and insert 1 AA Alkaline
battery in the battery compartment.
2. All segments of the LCD will light up briefly, then the display “-:--“ and the
current indoor temperature will be displayed
Note: If the Display time is pressed while the analog clock is still searching
for the WWVB signal, the digital clock will display “--/--“ for the date and “-:--
“ for the world time.
3. Wait for the digital clock to receive the WWVB time and date from the
analog clock. Then the digital clock will start normal runs.
MANUAL TIME
SET
BUTTON
BATTERY COMPARTMENT
COVER
BATTERY COMPARTMENT
TIME SET KEY (FOR
WORLD TIME)
DISPLA
Y
KE
Y
Product specificaties
| Merk: | La Crosse Technology |
| Categorie: | Klok |
| Model: | WT-3128U-WH |
Heb je hulp nodig?
Als je hulp nodig hebt met La Crosse Technology WT-3128U-WH stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Klok La Crosse Technology
19 November 2024
19 November 2024
19 November 2024
15 November 2024
15 November 2024
15 November 2024
3 September 2024
3 September 2024
3 September 2024
3 September 2024
Handleiding Klok
- Klok Braun
- Klok IKEA
- Klok Casio
- Klok Fysic
- Klok Xiron
- Klok Accusplit
- Klok Ade
- Klok Alecto
- Klok Amplicom
- Klok Ascot
- Klok Audiovox
- Klok Auriol
- Klok Balance
- Klok Balance Time
- Klok BBrain
- Klok Dexford
- Klok Digi-tech
- Klok Ecom
- Klok Elro
- Klok Eurochron
- Klok Fisher Price
- Klok Geemarc
- Klok Gingko
- Klok Gira
- Klok Global Tronics
- Klok GlobalTronics
- Klok Glunz
- Klok Hager
- Klok Hama
- Klok Hermle
- Klok IHome
- Klok Irox
- Klok Karlsson
- Klok Kogan
- Klok Konig
- Klok Krontaler
- Klok La Crosse
- Klok Lenovo
- Klok Lexon
- Klok Livoo
- Klok Lorus
- Klok Lydion
- Klok Marquant
- Klok Mebus
- Klok Mondaine
- Klok Muse
- Klok Nedis
- Klok Perel
- Klok Profile
- Klok Ranex
- Klok RCA
- Klok Salter
- Klok Sempre
- Klok Taylor
- Klok Techno Line
- Klok Technoline
- Klok TFA
- Klok Tronic
- Klok United Office
- Klok Velleman
- Klok Ventus
- Klok Vitek
- Klok Weinberger
- Klok Jacob Jensen
- Klok Jung
- Klok Oregon Scientific
- Klok McIntosh
- Klok Camry
- Klok ECG
- Klok Cresta
- Klok Citizen
- Klok Trevi
- Klok Zuiver
- Klok Chacon
- Klok Valcom
- Klok Dormakaba
- Klok AcuRite
- Klok ART
- Klok AV:link
- Klok Elation
- Klok ASA
- Klok TFA Dostmann
- Klok Antelope Audio
- Klok Equity
- Klok DB Technologies
- Klok Focus Electrics
- Klok Pyramid
- Klok CyberData Systems
- Klok Electronics International
- Klok Antelope
- Klok Bearware
Nieuwste handleidingen voor Klok
20 November 2024
19 November 2024
18 November 2024
18 November 2024
18 November 2024
18 November 2024
18 November 2024
18 November 2024
18 November 2024
18 November 2024