La Crosse Technology WT-3122A Handleiding

La Crosse Technology Klok WT-3122A

Lees hieronder de 📖 handleiding in het Nederlandse voor La Crosse Technology WT-3122A (2 pagina's) in de categorie Klok. Deze handleiding was nuttig voor 7 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

12.5 Inch Atomic Wall Clock

Model: WT-3122A

DC: 052518

For information about WWVB, atomic time signal visit:

http://bit.ly/AtomicTime

• Always purchase the correct size and grade of battery most

suitable for intended use.

• Clean the battery contacts and also those of your clock prior

to battery installation.

• Ensure the battery is installed with correct polarity (+ and -).

• Remove battery from your clock when it is not used for an

extended period of time.

• Promptly remove an expired battery.

CARE AND MAINTENANCE

Battery Requirements: 1 AA (IEC LR6) required in movement

(Alkaline recommended)

Battery life: 1 battery; over 12 months

SPECIFICATIONS

La Crosse Technology, Ltd. provides a 1-year limited time

warranty (from date of purchase) on this product relating to

manufacturing defects in materials & workmanship.

Before returning a product, please contact our friendly

customer support with questions or visit our online help.

Phone: 1-608-782-1610

Online: www.lacrossetechnology.com/support/

WARRANTY AND SUPPORT

Page | 1Page | 4

WARNING: This product can expose you to chemicals including

styrene, which is known in the State of California to cause cancer.

For more information go to: https://www.p65warnings.ca.gov/

POWER UP

1. Select Time Zone and DST ON or OFF.

2. Insert 1 AA battery into your clock.

3. For best reception, place your clock on a wall that faces

Ft. Collins, Colorado. During the night, your clock will set itself.

IMPORTANT:

• Hands will move to 12:00 and search for the atomic time

signal.

• After 8-10 minutes if no atomic time signal is received, the

clock will start running from 12:00.

• Your clock will continue to search for the WWVB atomic time

signal.

• Allow up to 5 nights for the clock to receive the atomic time

signal.

SET

RESET

WAVE (Atomic search)

Battery

Time Zone Selector

Daylight Saving Time

Selector

Set Time:

1. Hold SET for 3 seconds

2. Press and Hold SET to move hands quickly.

3. Press and release SET to move hands forward step by step.

Reset:

If the clock does not respond when trying to manually set your

time, press the RESET button on the movement case.

MANUALLY SET TIME

• In certain areas, your clock may not be able to receive

the atomic time signal due to signal strength or interference.

• In this case, your clock can be set manually and operate as

a quartz clock until the WWVB signal can be received.

Note: The atomic time signal will override manual settings.

product support, and awesome giveaways.

LET’S BE SOCIAL!

Page | 3Page | 2

Product specificaties

Merk:	La Crosse Technology
Categorie:	Klok
Model:	WT-3122A
Kleur van het product:	Hout
Soort:	Mechanische klok
Vormfactor:	Cirkel
Ondersteuning voor plaatsing:	Muur
Diameter:	317.5 mm
Ondersteund aantal accu's/batterijen:	1
Type batterij:	AA