La Crosse Technology 512-807 Handleiding

La Crosse Technology Klok 512-807

Lees hieronder de 📖 handleiding in het Nederlandse voor La Crosse Technology 512-807 (14 pagina's) in de categorie Klok. Deze handleiding was nuttig voor 20 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/14

Manual

Introduction

The Wireless Weather Station with Digital Barometer oers radio-controlled time,

weather forecast, and indoor and outdoor temperature on one easy to read display.

ATOMIC WEATHER STATION:

Time WWVB Perpetual

Reception icon Calendar

Channel indicator

Transmitter low

battery indicator

Forecast icon

-hour pressure 12

history graph

Current pressure

Temperature

trend indicators

Outdoor temperature Indoor temperature

512-807 Digital Barometer

Wireless Weather Station

FEATURES:

Six digit time display

Atomic time and date with manual set option

Automatically updates for Daylight Saving Time (on/o option)

12-hour or 24-hour selectable time

Barometric pressure with 12-hour history graph.

Forecast icons: sunny, partly cloudy, cloudy, rainy and stormy.

Time Alarm

Perpetual calendar.

Indoor temperature (°F or °C)

Outdoor temperature (°F or °C)

Can read up to 3 outdoor sensors

Temperature trend indicators for indoor and outdoor temperature: up, steady, down.

Minimum and Maximum indoor and outdoor temperature

Wall hanging or free standing

Low battery indicator for receiver and transmitter

100 foot wireless transmission range (open air)

SET UP:

IMPORTANT: Do not mix old and new batteries.

Remove the screws and the battery cover from the back of the transmitter with a small

screwdriver. (see install batteries in transmitter).

Set the transmitter to Channel 1.

: if you have additional transmitters set them to channel 2 and channel 3 respectively. NOTE

Insert fresh alkaline batteries into the transmitter, observing the correct polarity (see marking

inside battery compartment). Keep the transmitter 5-10 feet from the weather station.

Select Fahrenheit or Celsius for the sensor display.

Within 30 seconds of powering up the transmitter, insert batteries into the Weather station,

observing the correct polarity Once the (see install batteries in the weather station).

batteries are in place, all segments of the LCD will light up briey. Following the indoor

temperature will be displayed. If the indoor temperature is not shown in the LCD after 60

seconds, remove the batteries and wait for at least 60 seconds before reinserting them.

Once the indoor data is displayed, proceed to the next step.

After the batterie are inserted, the Weather station will start receiving outdoor temp data s

from the transmitter.

: This can take up to 10 minutes. NOTE

The outdoor temperature should then be displayed on the Weather station. If this does not

happen after 10 minutes, remove the batteries from both units and start again from the

beginning.

In order to ensure sucient 434 MHz transmission, the outdoor transmitter should be placed

a distance of no more than 100 feet (30 meters, open air) from the Weather station.

INSTALL BATTERIES IN THE TRANSMITTER:

Remove the screws and the battery cover from the back of the transmitter with a small

screwdriver.

Select the channel to transmit the outdoor temperature.

: if using more than one transmitter, set each to a dierent channel to be displayed on NOTE

the weather station.

Insert two fresh AAA alkaline batteries into the transmitter, observing the correct polarity

(see marking inside battery compartment). Keep transmitter 5-10 feet from the weather

station.

Select Fahrenheit or Celsius for the sensor display.

Channel Selection

C/F Selection

Battery Cover

TX Button

Battery Compartment

Product specificaties

Merk:	La Crosse Technology
Categorie:	Klok
Model:	512-807
Kleur van het product:	Grijs
Breedte:	240 mm
Diepte:	38 mm
Hoogte:	180 mm
Soort:	Atoomwandklok
Vormfactor:	Vierkant
Ondersteund aantal accu's/batterijen:	2
Wekker:	Ja
Thermometer:	Ja
Batterijen inbegrepen:	Nee
Type batterij:	Alkaline