La Crosse Technology WS-8119U-IT-B Handleiding
La Crosse Technology
Klok
WS-8119U-IT-B
Lees hieronder de 📖 handleiding in het Nederlandse voor La Crosse Technology WS-8119U-IT-B (3 pagina's) in de categorie Klok. Deze handleiding was nuttig voor 36 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/3
Page 1 of 6
Model WS-8119U
Atomic Digital Wall Clock
With Time with Seconds, Month, Date, Day, & IN/OUT
Temperature
QUICK SETUP GUIDE
Table of Contents
Table of Contents ............................................................................................ 1
Congratulations ............................................................................................... 2
Features: ......................................................................................................... 2
Setup Information: ........................................................................................... 2
The Outdoor Temperature Sensor .................................................................. 2
Positioning the Temperature Sensor: ............................................... 3
To wall mount the Temperature Sensor: ........................................... 3
WWVB (Atomic Time) Radio signal: ............................................................... 3
Setup of Time and Display Options: ................................................................ 3
1. Set the Time Zone: ....................................................................... 4
2. Set Daylight Saving Time ON/OFF: .............................................. 4
3. Set Language: .............................................................................. 4
5. Set Time Manually - Minute: ......................................................... 4
6. Set Date Manually - Year: ............................................................. 4
7. Set Date Manually - Month: .......................................................... 4
8. Set Date Manually - Date: ............................................................. 4
9. Set Date Manually - Day of Week: ................................................ 4
10. Set 12 or 24 Hour Time Mode:.................................................... 4
11. Set Temperature Mode - °F or °C: .............................................. 4
Daylight Saving Time ...................................................................................... 4
Setting the Daily Alarms: ................................................................................. 4
About the Daily Alarms: ........................................................................... 5
Automatic Snooze function: ............................................................................ 5
Online Resources ............................................ Error! Bookmark not defined.
Care and Maintenance ..................................... Error! Bookmark not defined.
Battery Replacement ...................................................................................... 5
The Low Battery Icons: ..................................................................... 5
Specifications .................................................................................................. 5
Power Requirements ...................................................................................... 6
FCC Statement ............................................................................................... 6
Warranty Information ...................................................................................... 6
Page 2 of 6
Congratulations
You have purchased an atomic digital Atomic Clock from La Crosse
Technology®, providing the world's most accurate time at a glance, plus
wireless outdoor temperature.
Features:
x WWVB Radio Controlled Clock (Atomic Clock)
x Time in 12/24 hour format
x Manual time setting option
x Time Zone setting: +/- 12 Hours from GMT
x Daylight Saving Time(DST) On/Off
x Continuous calendar up to year 2054
x Date and weekday displayed and set automatically with the time
x Temperature display in °F or °C
x Snooze function (10 minutes)
x Indoor thermometer
x Wireless Outdoor Temperature Sensor
x Low battery icons for display and sensor
Setup Information:
The Temperature Sensor uses 2 x AAA, IEC LR3 1.5V battery. To install and
replace the batteries, please follow the steps that follow:
x Position the Atomic Clock and the Outdoor Sensor
five to six feet apart with nothing between them.
x Insert batteries into the Wireless Outdoor
Temperature Sensor first - it is important that you do
not insert the batteries into the Atomic Clock yet.
x You must insert the batteries into the Atomic Clock
within 3 minutes of inserting the batteries into the
Sensor.
x Slide out the battery compartment lid at the bottom of
the Outdoor Sensor.
x Insert the batteries into the Outdoor Sensor first, observing the
correct polarity (see markings inside battery compartment). Replace
the battery holder on the unit.
x Immediately after and within 3 minutes, insert the batteries into the
Atomic Clock, observing the correct polarity (see markings inside
battery compartment). Replace the battery cover. The Atomic Clock
uses 2 x AA batteries ( IEC LR6, 1.5V ).
x The outdoor temperature and the signal reception icon should be
displayed on the Atomic Clock. If this does not happen after 3
minutes, the batteries will need to be removed from both units and re-
inserted, following the instructions above.
Note: In the event of changing batteries in any of the units, all units need to
be reset by following the setting up procedures. This is because a random
security code is assigned by the Sensor at start-up and this code must be
received and stored by the Atomic Clock in the first 3 minutes of power being
supplied to it
Note: If the signal reception is not successful on the first frequency
(915MHz) for 22 seconds, the frequency is changed to 920MHz and the
learning is tried another 22 seconds. If still not successful the reception is
tried for 22 seconds on 910MHz. This will also be done for re-
synchronization.
The Outdoor Temperature Sensor
x Remote transmission of outdoor temperature to Temperature Station
by 915 MHz
x Shower proof casing
This product offers: INSTANT TRANSMISSION is the state-of-
the-art new wireless transmission
technology, exclusively designed and
developed by LA CROSSE TECHNOLOGY.
INSTANT TRANSMISSION offers you an
immediate update (every 8 seconds!) of all
your outdoor data measured from the
transmitters: follow your climatic variations
in real-time!
Page 3 of 6
x Wall mounting case
x Mount in a sheltered place. Avoid direct rain
and sunshine.
x Under the eaves of your home is an ideal
place.
Positioning the Temperature Sensor:
The Sensor is supplied with a holder that may be attached to a wall with the
two screws supplied. The Sensor can also be positioned on a flat surface by
securing the stand to the bottom to the Transmitter.
Note: Before permanently fixing the Sensor wall base, place all units in the
desired locations to check that the outdoor temperature reading is
receivable. If the signal is being received, the signal reception icon will be
displayed on the Atomic Clock. In event that the signal is not received,
relocate the Sensor or move it slightly as this may help the signal reception.
To ensure a good connection, there should be a distance of no more than
200 feet between the final position of the Atomic Clock and the Sensor.
To wall mount the Temperature Sensor:
1. Secure the bracket onto a desired wall using the screws
and plastic anchors.
2. Clip the remote temperature sensor onto the bracket.
WWVB (Atomic Time) Radio signal:
x The clock must receive the WWVB Radio Signal to automatically set
the time, date and weekday.
x The clock automatically starts the WWVB on the top of the hour
between the hours of 12:00 AM and 6:00 AM.
x If this synchronization attempt is successful the radio tower icon
appears on the display. The radio tower icon will disappear if the
signal reception is unsuccessful.
About WWVB (Atomic Time) Radio Signal Reception:
x A continuously displayed radio tower icon indicates that the
WWVB signal was received successfully during the last attempt. If
the clock attempts to receive the WWVB signal and is unsuccessful,
the tower icon will not be continuously displayed on the LCD.
x We recommend a minimum distance of 8 feet (2.5 meters) to all
sources of interference, such as televisions or computer monitors
x Radio reception is weaker in rooms with concrete walls (e.g.: in
cellars) and in offices. In such environments, place the system close
to the window.
Setup of Time and Display Options:
Above: Back view of Atomic Clock showing buttons and battery
compartment.
Note: The "SET" button is used to enter SET mode. The display will exit
SET mode automatically after 10 seconds of inactivity. If the display exits
SET mode while you are following the setup instructions, press the "SET"
button the indicated number of times to return to the portion of the SET mode
desired.
Page 4 of 6
1. Set the Time Zone:
Press the “SET” button and the Time Zone display will flash. Use the
“PLUS” button to select the correct Time Zone setting from the
available selections below:
-1,-2,-3: Other time zones
-4: ATL - Atlantic
-5: EST - Eastern (default setting)
-6: CST - Central
-7: MST - Mountain
-8: PST - Pacific
-9: ALA - Alaska
-10,-11,-12,12,11,10,9,8,7,6,5,4,3,2,1: Other time zones
0: - Greenwich Mean Time (GMT)
2. Set Daylight Saving Time ON/OFF:
Press the “SET” button a second time and DST will flash. Press the
"PLUS" button to toggle Daylight Saving Time on ("On") or off ("OFF").
See "Daylight Saving Time" on page 4 for more information.
3. Set Language:
Press the “SET” button a third time and the Language Abbreviation
will flash. Press the "PLUS" button to switch the Language to be
displayed. The three-letter abbreviation for the day of the week will
display in the bottom of the LCD while the setting flashes above.
US: English (default setting)
F: French (Français)
E: Spanish (Español)
d: German (Deutsch)
Note: Manual time and date settings are optional. In most cases, the time
and date will set automatically via WWVB radio signal. If placement for the
display does not allow for WWVB reception due to interference, you will need
to set the time and date manually.
4. Set Time Manually - Hour:
Press the “SET” button a fourth time and the Hours digits will flash. Use
the “PLUS“ button to set the correct hour.
5. Set Time Manually - Minute:
Press the “SET” button a fifth time and the Minutes digits will flash. Use
the “PLUS“ button to set the correct minute.
6. Set Date Manually - Year:
Press the “SET” button a sixth time and the Year digits will flash. Use
the “
PLUS“ button to set the correct year.
7. Set Date Manually - Month:
Press the “SET” button a seventh time and the Month digits will flash.
Use the “PLUS“ button to set the correct month.
8. Set Date Manually - Date:
Press the “SET” button an eighth time and the Date digits will flash. Use
the “PLUS“ button to set the correct date.
9. Set Date Manually - Day of Week:
Press the “SET” button a ninth time and the Day of Week abbreviation
will flash. Use the “PLUS“ button to set the correct day of week.
10. Set 12 or 24 Hour Time Mode:
Press the “SET” button a tenth time and the 12 or 24 Hour Time
Mode digits will flash. Use the “PLUS“ button to set the time mode to
either a 12 or 24 hour clock.
11. Set Temperature Mode - °F or °C:
Press the “SET” button an eleventh time and the Temperature Mode
abbreviation will flash. Use the “PLUS“ button to set the temperature
mode to °F or °C.
Daylight Saving Time
x The National Institute of Standards and Technology and WWVB
encode a special DST “bit” in the WWVB transmission for DST.
x Your La Crosse Technology® clock will read this information (only if
"DST" is set to "On") and automatically advance the time one hour in
the spring and back an hour in the fall.
x Arizona and Indiana: If you live in an area that does not recognize
DST you must de-activate Daylight Saving Time by setting "DST" to
"OFF"
x See "Set Daylight Saving Time ON/OFF" on page 4 for instructions.
Setting the Daily Alarms:
xTo turn the alarm on:
Press the "ALARM" button. The LCD will display the alarm icon .
Page 5 of 6
xTo set the Alarm Time - Hour: Press and hold down the "ALARM"
button for 2 seconds until the hours digits flash. Use the “PLUS”
button to set the hour. Press the "ALARM" button to confirm your
setting and move to setting the minutes.
xTo set the Alarm Time - Minutes: The Minutes digits of the Alarm
Time will flash. Use the “PLUS” button to set the minutes. You can
hold the "PLUS" button in to speed up the setting of minutes by using
five minute increments. Press the "ALARM" button to confirm your
minutes setting and to end the setting procedure.
x To activate or deactivate the daily alarms, briefly press the “ALARM”
button once. When the alarm is active the clock displays the alarm
icon below the word "ALARM". When deactivated, the alarm
icon does not display.
About the Daily Alarms:
x After 30 seconds without pressing any button the clock switches
automatically from alarm setting mode to normal clock mode.
x The alarm will sound for 85 seconds if not deactivated. You can
deactivate it by pressing any button. The alarm will be repeated
automatically after 24 hours.
x The alarm uses 3 different patterns of tone, beginning gently and
increasing in intensity, known as a "Crescendo Alarm". The effect is to
provide increasing levels of alarm to ensure waking while providing a
gentle alarm to lighter sleepers.
Automatic Snooze function:
x While the alarm is sounding, press the "SNOOZE" button to activate
the snooze function. The alarm icon flashes on the display until
the alarm sounds again when the Snooze period is over (10 minutes).
x Pressing the "SNOOZE" button moves the alarm back by 10 minutes
and the alarm will restart at this time.
x The Snooze function can be interrupted by pressing any button.
Battery Replacement
x If you notice that the LCD appears faint or that WWVB time reception
is not working properly, try a fresh set of batteries before contacting
customer support.
The Low Battery Icons:
x When the batteries need to be replaced in the Wireless Outdoor
Sensor, the LCD will display the “TX” icon.
x When the batteries need to be replaced in the Atomic Clock, the LCD
will display the “RX” icon.
We recommend that you replace the batteries in all units
regularly to ensure optimum accuracy of these units. Please
see the battery life in the specifications below.
Help us to keep our environment clean. Return used batteries
to an authorized depot.
Specifications
x Battery Life - Atomic Clock: Up to 24 months
x Battery Type - Atomic Clock: 2 X AA (IEC LR6, 1.5V)
x Battery Life - Wireless Outdoor Temperature Sensor: Up to 12 months
- 2 X
x Battery Type - Wireless Outdoor Temperature Sensor: 2 X AAA (IEC
LR3, 1.5V)
x Indoor thermometer measurement range:
14.2°F to 99.9° F (-9.9°C to 37.8°C)
x Indoor temperature update interval: every 16 seconds
x Wireless Outdoor Temperature Sensor measurement range: -39.8° F
to 139.8° F (-39.9° C to 59.9° C)
x Outdoor temperature update interval: every 8 seconds
x Wireless Outdoor Temperature Sensor transmission range: 200 feet.
x Dimensions - Atomic Clock: 8.95” L x 1.20” W x 7.20” H
x Dimensions - Wireless Outdoor Temperature Sensor: 1.27” L x 0.55”
W x 3.41” H
Page 6 of 6
Power Requirements
Note: Rechargeable batteries are not recommended due to the wide
variation in performance between brands and types. Please use only fresh
alkaline batteries.
x Atomic Clock: 2 “AA” Alkaline Batteries (not included)
x Wireless Outdoor Temperature Sensor:
2 “AAA” Alkaline Batteries (not included)
FCC Statement
FCC ID: OMO-TX38U
This device complies with part 15 of the FCC rules. Operation is subject to
the following conditions: (1) This device may not cause harmful interference,
and (2) This device must accept any interference received, including
interference that may cause undesired operation.
Freq. 915 MHz
La Crosse Technology
Model: TX38-IT-N
Made in China
Warranty Information
La Crosse Technology, Ltd provides a 1-year limited warranty on this product against
manufacturing defects in materials and workmanship.
This limited warranty begins on the original date of purchase, is valid only on products
purchased and used in North America and only to the original purchaser of this product. To
receive warranty service, the purchaser must contact La Crosse Technology, Ltd for
problem determination and service procedures. Warranty service can only be performed by
a La Crosse T echnology, Ltd authorized service center. The original dated bill of sale must
be presented upon request as proof of purchase to La Crosse Technology, Ltd or La Crosse
Technology, Ltd’s authorized service center.
La Crosse Technology, Ltd will repair or replace this product, at our option and at no charge
as stipulated herein, with new or reconditioned parts or products if found to be defective
during the limited warranty period specified above. All replaced parts and products become
the property of La Crosse Technology, Ltd and must be returned to La Crosse Technology,
Ltd.
Replacement parts and products assume the remaining original warranty, or ninety (90)
days, whichever is longer. La Crosse T echnology, Ltd will pay all expenses for labor and
materials f or all repairs covered by this warranty. If necessary repairs are not covered by
this warranty, or if a product is examined which is not in need of repair, you will be charged
for the repairs or examination.
The owner must pay any shipping charges incurred in getting your La Crosse Technology,
Ltd product to a La Crosse Technology, Ltd authorized service center.
Your La Crosse Technology, Ltd warranty covers all defects in material and workmanship
with the following specified exceptions: (1) damage caused by accident, unreasonable use
or neglect (including the lack of reasonable and necessary maintenance); (2) damage
occurring during shipment (claims must be presented to the carrier); (3) damage to, or
deterioration of , any accessory or decorative surface; (4) damage resulting from failure to
follow instructions contained in your owner’s manual; (5) damage resulting from the
performance of repairs or alterations by someone other than an authorized La Crosse
Technology, Ltd authorized service center; (6) units used for other than home use (7)
applications and uses that this prod uct was not intended or (8) the products inabil ity to
receive a signal due to any source of interference.
This warranty covers only actual defects within the product itself, and does not cover the
cost of installation or removal from a fixed installation, normal set-up or adjustments, claims
based on misrepresentation by the seller or performance variations resulting from
installation-related circumstances.
LA CROSSE TECHNOLO GY, LTD WILL NOT ASSUME LIABILITY FOR INCIDENTAL,
CONSEQUENTIAL, PUNITIVE, OR OTHER SIMILAR DAMAGES ASSOCIATED WITH
THE OPERATION OR MALFUNCTION OF THIS PRODUCT. THIS PRODUCT IS NOT TO
BE USED FOR MEDICAL PURPOSES OR FOR PUBLIC INFORMATION. THIS
PRODUCT IS NOT A TOY. KEEP OUT OF CHILDREN’S REACH.
This warranty gives you specific legal rights. You may also have other rights specific to your
State. Some States do no allow the exclusion of consequential or incidental damages;
therefore the above exclusion of limitation may not apply to you.
For warranty work, technical support, or information contact:
La Crosse Technology, Ltd
2817 Losey Blvd. S.
La Crosse, WI 54601
Web: http://www.lacrossetechnology.com/support
All rights reserved. This handbook must not be reproduced in any form,
even in excerpts, or duplicated or processed using electronic, mechanical or
chemical procedures without written permission of the publisher.
This handbook may contain mistakes and printing errors. The information in
this handbook is regularly checked and corrections made in the next issue.
We accept no liability for technical mistakes or printing errors, or their
consequences.
All trademarks and patents are acknowledged.
Product specificaties
| Merk: | La Crosse Technology |
| Categorie: | Klok |
| Model: | WS-8119U-IT-B |
Heb je hulp nodig?
Als je hulp nodig hebt met La Crosse Technology WS-8119U-IT-B stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Klok La Crosse Technology
5 December 2024
5 December 2024
5 December 2024
5 December 2024
5 December 2024
5 December 2024
19 November 2024
19 November 2024
19 November 2024
15 November 2024
Handleiding Klok
- Klok Braun
- Klok IKEA
- Klok Casio
- Klok Fysic
- Klok Xiron
- Klok Accusplit
- Klok Ade
- Klok Alecto
- Klok Amplicom
- Klok Ascot
- Klok Audiovox
- Klok Auriol
- Klok Balance
- Klok Balance Time
- Klok BBrain
- Klok Dexford
- Klok Digi-tech
- Klok Ecom
- Klok Elro
- Klok Eurochron
- Klok Fisher Price
- Klok Geemarc
- Klok Gingko
- Klok Gira
- Klok Global Tronics
- Klok GlobalTronics
- Klok Glunz
- Klok Hager
- Klok Hama
- Klok Hermle
- Klok IHome
- Klok Irox
- Klok Karlsson
- Klok Kogan
- Klok Konig
- Klok Krontaler
- Klok La Crosse
- Klok Lenovo
- Klok Lexon
- Klok Livoo
- Klok Lorus
- Klok Lydion
- Klok Marquant
- Klok Mebus
- Klok Mondaine
- Klok Muse
- Klok Nedis
- Klok Perel
- Klok Profile
- Klok Ranex
- Klok RCA
- Klok Salter
- Klok Sempre
- Klok Taylor
- Klok Techno Line
- Klok Technoline
- Klok TFA
- Klok Tronic
- Klok United Office
- Klok Velleman
- Klok Ventus
- Klok Vitek
- Klok Weinberger
- Klok Jacob Jensen
- Klok Jung
- Klok Oregon Scientific
- Klok McIntosh
- Klok Camry
- Klok ECG
- Klok EMOS
- Klok Cresta
- Klok Citizen
- Klok Trevi
- Klok Zuiver
- Klok Chacon
- Klok Valcom
- Klok Dormakaba
- Klok AcuRite
- Klok ART
- Klok AV:link
- Klok Elation
- Klok ASA
- Klok TFA Dostmann
- Klok Antelope Audio
- Klok Equity
- Klok DB Technologies
- Klok Focus Electrics
- Klok Pyramid
- Klok CyberData Systems
- Klok Electronics International
- Klok Antelope
- Klok Bearware
Nieuwste handleidingen voor Klok
14 December 2024
14 December 2024
14 December 2024
7 December 2024
7 December 2024
7 December 2024
7 December 2024
7 December 2024
7 December 2024
7 December 2024