La Crosse Technology 5131311 Handleiding
La Crosse Technology
Klok
5131311
Lees hieronder de 📖 handleiding in het Nederlandse voor La Crosse Technology 5131311 (2 pagina's) in de categorie Klok. Deze handleiding was nuttig voor 30 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/2
INTRODUCTION:
The Analog- Digital Atomic Clock features atomic (radio-Style
controlled) time and date, indoor temperature/humidity, week
of . Tap or wave your hand past the motion sensor the year
under LCD to change the . display options
ANALOG-STYLE DIGITAL CLOCK: ATOMIC
SETUP INSTRUCTIONS:
Note: Setup is most eective at night when the WWVB radio-
controlled time/date signal is strongest.
1. Slide the /ON/OFF switch to ON.
2. Remove battery cover from the back of the Analog-Style
Digital Atomic Clock. Slide tab down and pull out to remove
the cover.
3. Insert four NEW AA batteries (not included) into the Analog-
Style Digital Atomic Clock. Observe the correct polarity (see
marking inside the battery compartment).
4. Do not touch buttons for 15 minutes while the clock
searches for the WWVB time signal.
Important:
• Do NOT mix old and new batteries.
• Do Not Mix Alkaline, Standard, Lithium or Rechargeable
Batteries
PROGRAM MENU -BY- STEP STEP:
STEP 1:
TIME ZONE Hold the /SET button for 2 seconds to enter the
program menu.
Press and release the
+ button to select a dierent Time Zone:
o = Newfoundland NST
o = Atlantic AST
o = Eastern EST
o = Central CST
o = Mountain MST
o Pacic PST=
o AKST= Alaska
o = Hawaiian time zone. HAT
D SAVING TIME INDICATOR AYLIGHT : Press the– button to
select DST. The letters DST will appear in the upper right
corner. Conrm time zone and DST setting with the /SET
button and move to step 2.
STEP 2:
LANGUAGE: EN (English) will ash. Use the + or button to –
select the languag e for the day of the week:
o (English) EN
o DE (German)
o FR (French)
o (Italian) IT
o (Spanish) ES
o (Dutch) NE
o (Russian). RU
Conrm with the /SET button and move to step 3.
STEP 3:
YEAR: The year will ash. Press and release the + or button –
to select the correct year. Conrm with the /SET button and
move to step 4.
STEP 4:
MONTH/DATE: The month and date will ash. Press and
release the + or button to select the correct month and date. –
Hold the button to change the digits quickly. Conrm with the
/SE button and move to step 5. T
Note: The Day of the Week will set automatically after the
year, month and date are set.
STEP 5:
TIME: The hours and minutes together. Press and will flash
release the + or button to select the correct time. Hold the –
button to change the digits quickly. Conrm with the /SET
button and move to step 6.
STEP 6:
12/24 HOUR 12H will ash. Press and release the +button to
select 24-hour time.
Note: In 12-hour time, the PM indicator will show during
afternoon hours.
FAHRENHEIT/CELSIUS: Press and release the
- button to
select Fahrenheit of Celsius. Conrm with the /SET button
and exit.
Note: The Analog-Style Digital Atomic Clock will return to
active display after 30 seconds with no buttons pressed. The
clock will reflect whatever adjustments made before it timed
out.
CHANGE DISPLAY MODES: The clock will digitally display
dierent options in the lower portion of the LCD. A simple tap
or wave over the motion sensor on the front of the clock slow
below the LCD change the display. will
• : and release (1 One change of display mode Tap
second), or slowly Wave of your hand over the motion
sensor (must be within .75" / 2 cm of sensor) to change the
display one time.
• Repeat the tap or slow wave to change again. The display
will stay on the last change.
• : Display modes
o Calendar (weekday, month, date)
o Indoor temperature / humidity
o week of the year (Mon-Sun view) Work
o Digital time and weekday
Note: Tap or Wave very , within .75" (2 cm) slowly from motion
sensor to change the display.
Auto-scrolling display:
The clock will default to auto-scrolling through the display
options. When in auto-scroll this symbol will appear in >>>
front of the display.
Turn o the auto-scroll by (3 seconds) or slowly tap and hold
wave over the motion sensor for 3 seconds. The symbol >>>
will disappear and the clock will stay on the current display.
Analog- Style Digital Atomic Clock
with motion sensor that changes display options
Model: 513-1311 | Quick Setup Guide
WAVE TAP
FAHRENHEIT/CELSIUS: From normal display mode, press
and release the button to select temperature readings in °F/°C
Fahrenheit or Celsius
RESET BUTTON: If the Analog-Style Digital Atomic Clock is
not working properly with good batteries, press the RESET
button one time to reset the clock.
SECONDS: The seconds will populate around the outer edge
between the ve minute marks.
WWVB RADIO CONTROLLED TIME
The NIST radio station, WWVB, is located in Ft. Collins,
Colorado and transmits the exact time signal continuously
throughout the United States at 60 kHz. The signal can reach
a distance of 2,000 miles from the transmitter. The Analog-
Style Digital Atomic Clock receives this signal through the
internal antenna. However, due to the nature of the Earth’s
Ionosphere, reception is very limited during daylight hours.
WWVB RECEPTION ICON with full signal strength will
appear on screen along with the word OK if the reception of
WWVB time signal is successful.
• No tower icon displayed. The Analog-Style Digital Atomic
Clock unable to receive a signal at this time. was
• Reposition the Analog-Style Digital Atomic Clock for better
signal reception or try again at bedtime.
• Press the /SET button once to force a signal search at night
when reception is best.
• The Analog-Style Digital Atomic Clock will search each hour
for time signal. a WWVB
Note: In case the Analog-Style Digital Atomic Clock is not able
to detect the WWVB time signal after 5 nights, (disturbances,
transmitting distance, etc.); slide the /ON/OFF switch to OFF
and follow the to set the time manually. program menu
POSITIONING THE ANALOG-STYLE DIGITAL ATOMIC
CLOCK:
Place the Analog-Style Digital Atomic Clock near an exterior
wall with the front or back facing toward Ft. Collin Colorado for
best WWVB reception. The display should be six feet from
other electronics or wireless devices.
CARE AND MAINTENANCE:
• Do Not Mix Old and New Batteries
• Do Not Mix Alkaline, Standard, Lithium or Rechargeable Batteries
• Do not expose the Analog- Style Digital Atomic Clock to extreme
temperatures, vibration or shock.
• Keep Analog-Style Digital Atomic Clock dry.
• Clean the Analog- Style Digital Atomic Clock with a soft damp cloth. Do
not use solvents or scouring agents.
• The Analog-Style Digital Atomic Clock is not to be used for medical
purpose or for public information, but for home use only.is
• The specifications of this Analog- Style Digital Atomic Clock may
change without prior notice.
• Improper use or unauthorized opening of housing will void the
warranty.
SPECIFICATIONS:
Indoor Temperature Range: +14.2°F to +122°F
(-9.9°C to 50°C)
Resolution: 0.1 degree
Humidity Range: 5%-99%
Resolution: 1%
Battery Life:
Analog-Style Digital Atomic Clock: Battery life over 12 months
Dimensions:
Analog-Style Digital Atomic Clock 8.63" x 1.28" x 10.34" :
(219.2 x 32.5 x 262.6mm)
WARRANTY INFORMATION
La Crosse Technology, Ltd provides a 1 year limited warranty on this -
product against manufacturing defects in materials and workmanship.
This limited warranty begins on the original date of purchase, is valid
only on products purchased and used in North America and only to the
original purchaser of this product. To receive warranty service, the
purchaser must contact La Crosse Technology, Ltd for problem
determination and service procedures. Warranty service can only be
performed by a La Crosse Technology, Ltd authorized service center.
The original dated bill of sale must be presented upon request as proof
of purchase to La Crosse Technology, Ltd or La Crosse Technology,
Ltd’s authorized service center.
La Crosse Technology, Ltd will repair or replace this product, at our
option and at no charge as stipulated herein, with new or reconditioned
parts or products if found to be defective during the limited warranty
period specified above. All replaced parts and products become the
property of La Crosse Technology, Ltd and must be returned to La
Crosse Technology, Ltd. Replacement parts and products assume the
remaining original warranty, or ninety (90) days, whichever is longer.
La Crosse Technology, Ltd will pay all expenses for labor and materials
for all repairs covered by this warranty. If necessary repairs are not
covered by this warranty, or if a product is examined which is not in
need or repair, you will be charged for the repairs or examination. The
owner must pay any shipping charges incurred in getting the La Crosse
Technology, Ltd product to a La Crosse Technology, Ltd authorized
service center. La Crosse Technology, Ltd will pay return ground
shipping charges to the owner of the product to a USA address only.
The La Crosse Technology, Ltd warranty covers all defects in material
and workmanship with the following specified exceptions: (1) damage
caused by accident, unreasonable use or neglect (including the lack of
reasonable and necessary maintenance); (2) damage occurring during
shipment (claims must be presented to the carrier); (3) damage to, or
deterioration of, any accessory or decorative surface; (4) damage
resulting from failure to follow instructions contained in the owner’s
manual; (5) damage resulting from the performance of repairs or
alterations by someone other than an authorized La Crosse
Technology, Ltd authorized service center; (6) units used for other than
home use (7) applications and uses that this product was not intended
or (8) the products inability to receive a signal due to any source of
interference.. This warranty covers only actual defects within the
product itself, and does not cover the cost of installation or removal
from a fixed installation, normal set up or adjustments, claims based on -
misrepresentation by the seller or performance variations resulting from
installation-related circumstances.
LA CROSSE TECHNOLOGY, LTD WILL NOT ASSUME LIABILITY
FOR INCIDENTAL, CONSEQUENTIAL, PUNITIVE, OR OTHER
SIMILAR DAMAGES ASSOCIATED WITH THE OPERATION OR
MALFUNCTION OF THIS PRODUCT. THIS PRODUCT IS NOT TO
BE USED FOR MEDICAL PURPOSES OR FOR PUBLIC
INFORMATION. THIS PRODUCT IS NOT A TOY. KEEP OUT OF
CHILDREN’S REACH.
This warranty gives you specific legal rights. You may also have other
rights specific to the State. Some States do not allow the exclusion of
consequential or incidental damages therefore the above exclusion of
limitation may not apply to you.
For warranty work, technical support, or information contact:
La Crosse Technology, Ltd
2817 Losey Blvd. S.
La Crosse, WI 54601
The complete instruction manual is
available at:
www.lacrossetechnology.com/513 1311-
Contact Support: 1- - - 608 782 1610
Product Registration:
www.lacrossetechnology.com/support/register
FCC Disclaimer:
This Device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) the device must accept any interference
received, including interference that may cause undesired operation.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY
RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED
MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS
COULD VOID THE USER AUTHORITY TO OPERATE THE
EQUIPMENT
All rights reserved. This handbook must not be reproduced in any form,
even in excerpts, or duplicated or processed using electronic,
mechanical or chemical procedures without written permission of the
publisher.
This handbook may contain mistakes and printing errors. The
information in this handbook is regularly checked and corrections made
in the next issue. We accept no liability for technical mistakes or
printing errors, or their consequences.
All trademarks and patents are acknowledged.
Product specificaties
| Merk: | La Crosse Technology |
| Categorie: | Klok |
| Model: | 5131311 |
Heb je hulp nodig?
Als je hulp nodig hebt met La Crosse Technology 5131311 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Klok La Crosse Technology
5 December 2024
5 December 2024
5 December 2024
5 December 2024
5 December 2024
5 December 2024
19 November 2024
19 November 2024
19 November 2024
15 November 2024
Handleiding Klok
- Klok Braun
- Klok IKEA
- Klok Casio
- Klok Fysic
- Klok Xiron
- Klok Accusplit
- Klok Ade
- Klok Alecto
- Klok Amplicom
- Klok Ascot
- Klok Audiovox
- Klok Auriol
- Klok Balance
- Klok Balance Time
- Klok BBrain
- Klok Dexford
- Klok Digi-tech
- Klok Ecom
- Klok Elro
- Klok Eurochron
- Klok Fisher Price
- Klok Geemarc
- Klok Gingko
- Klok Gira
- Klok Global Tronics
- Klok GlobalTronics
- Klok Glunz
- Klok Hager
- Klok Hama
- Klok Hermle
- Klok IHome
- Klok Irox
- Klok Karlsson
- Klok Kogan
- Klok Konig
- Klok Krontaler
- Klok La Crosse
- Klok Lenovo
- Klok Lexon
- Klok Livoo
- Klok Lorus
- Klok Lydion
- Klok Marquant
- Klok Mebus
- Klok Mondaine
- Klok Muse
- Klok Nedis
- Klok Perel
- Klok Profile
- Klok Ranex
- Klok RCA
- Klok Salter
- Klok Sempre
- Klok Taylor
- Klok Techno Line
- Klok Technoline
- Klok TFA
- Klok Tronic
- Klok United Office
- Klok Velleman
- Klok Ventus
- Klok Vitek
- Klok Weinberger
- Klok Jacob Jensen
- Klok Jung
- Klok Oregon Scientific
- Klok McIntosh
- Klok Camry
- Klok ECG
- Klok EMOS
- Klok Cresta
- Klok Citizen
- Klok Trevi
- Klok Zuiver
- Klok Chacon
- Klok Valcom
- Klok Dormakaba
- Klok AcuRite
- Klok ART
- Klok AV:link
- Klok Elation
- Klok ASA
- Klok TFA Dostmann
- Klok Antelope Audio
- Klok Equity
- Klok DB Technologies
- Klok Focus Electrics
- Klok Pyramid
- Klok CyberData Systems
- Klok Electronics International
- Klok Antelope
- Klok Bearware
Nieuwste handleidingen voor Klok
14 December 2024
14 December 2024
14 December 2024
7 December 2024
7 December 2024
7 December 2024
7 December 2024
7 December 2024
7 December 2024
7 December 2024