La Crosse Technology 513-54087 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor La Crosse Technology 513-54087 (2 pagina's) in de categorie Klok. Deze handleiding was nuttig voor 39 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
Page 3Page 2
Atomic Digital Clock
with Desired Hour
Model: 513-1422
DC:061620
POWER UP
AA
AA
1. Insert 2-AA batteries into your Clock.
2. Configure Basic Settings.
1. Hold the SET button to enter the Settings Menu.
2. Use the + or - button to adjust, and SET to confirm.
3. Press the TIME ADVANCE button at any time to exit.
Settings Menu Order:
• Beep ON/OFF
• Atomic ON/OFF
• DST AUTOMATIC/ DST OFF / DST ON
• Time Zone
• Hour
• Minutes
• Temperature Fahrenheit/Celsius
Note: If Atomic OFF is selected, menu will skip to Hour setting
next.
BASIC SETTINGS
CUSTOM DISPLAY
For more product information visit: bit.ly/laxtech_support
DAYLIGHT SAVING TIME (DST) SETTINGS
DST AUTOMATIC: Clock gains 1 hour in spring and loses 1 hour in
the fall (default).
DST OFF: Clock remains in Standard Time all year long.
DST ON: Clock remains in Daylight Saving Time all year long.
ATOMIC TIME SIGNAL-WWVB
• The clock will search for the WWVB Atomic Time Signal
when powered on. If no reception is made, it will search or
automatically at UTC: 7:00, 8:00, 9:00, 10:00, and 11:00.
• Press the SET button to start or stop a search for the WWVB
signal.
• The Tower Icon will flash while searching, and be solid on
screen when the signal is received.
• For information about WWVB Atomic time visit: bit.ly/AtomicTime
Press the + (PLUS) button to switch between Indoor Temperature
or Seconds displayed.
Page 6Page 5Page | 4
SPECIF IC ATIONS
Indoor Temperature Range: 32°F to 99°F (0°C to 37°C)
Power Requirements: 2 “AA” Batteries (sold separately)
Dimensions: 11” W x 1.1” D x 8.54” H (27.9 cm x 2.8 cm x 21.7 cm)
DE SIRED HOUR ( TIME AD VANCE )
WAR R A N T Y I N F O
La Crosse Technology, Ltd. provides a (from date of purchase) on this product 1-year limited time warranty
relating to manufacturing defects in materials & workmanship.
La Crosse Technology, Ltd, 2830 S. 26th St., La Crosse, WI 54601
For Full Warranty Details, Visit: www.lacrossetechnology.com/support
CA R E + M A I N T ENANCE
Do not mix old and new batteries.
Do not mix Alkaline, Lithium, standard, or rechargeable batteries.
Always purchase the correct size and grade of battery most suitable for intended use.
Clean the battery contacts and also those of the device prior to battery installation.
Ensure the batteries have with correct polarity (+ / -).
Remove batteries from equipment that will not to be used for an extended period.
Promptly remove expired batteries.
FCC S TAT EMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
CAUTION!
Any changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
All rights reserved. This manual may not be reproduced in any form, even in part, or duplicated or processed
using electronic, mechanical or chemical process without the written permission
of the publisher.
This booklet may contain errors or misprints. The information it contains is regularly checked and corrections
are included in subsequent editions. We disclaim any responsibility for any technical error or printing error, or
their consequences. All trademarks and patents are recognized.
WARNING: This product can expose you to chemicals including styrene, which is known to the State of
California to cause cancer. For more information go to: www.P65Warnings.ca.gov
Your clock allows you to set a Desired Hour to other times around the
world. You can only change the Hour.
Set Desired Hour:
1. Hold the TIME ADVANCE button until the Hour flashes, “Desired Hour”
will show.
2. Press the + (PLUS) button to adjust the hour. Press the - (MINUS) button
to reset hour to “current hour”.
3. Press the TIME ADVANCE button to confirm and exit.
Switch between Desired Time and Local time:
• Press the TIME ADVANCE button to switch between Desired Time and
Local Time.
• Desired Time is indicated with this icon.
Note: In the even of battery change or reset, these settings will need to
be readjusted.
Set Desired Hour View Desired Hour View Local Time If you require additional support, get in touch with our friendly customer support
team based out of La Crosse, WI.
Phone: 1-608-782-1610
Online: bit.ly/contact_techsupport
Our knowledgeable customer support team is available:
Monday-Friday, 8am-6pm CST.
JOIN THE CO NVERSAT IO N
Ask questions, watch detailed setup videos, and provide feedback on our social
media outlets!
WERE HERE TO H ELP!
TIME ALARM
Set Alarm:
1. Hold the ALARM button to enter Alarm Settings. “AL” will show. Use the
+ or - button to adjust values.
2. Press the ALARM button to confirm and move to next item.
3. Press the TIME ADVANCE button any time to exit.
TIME ALARM
Activate/Deactivate Alarm:
The alarm is active when set.
Press the ALARM button to deactivate or activate the alarm. The alarm
time will show for 2 seconds.
Alarm Icon will show when active.
Note: The alarm will only sound based on the local time and not the
time advance time.
Alarm ON Alarm OFF


Product specificaties

Merk: La Crosse Technology
Categorie: Klok
Model: 513-54087

Heb je hulp nodig?

Als je hulp nodig hebt met La Crosse Technology 513-54087 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Klok La Crosse Technology

Handleiding Klok

Nieuwste handleidingen voor Klok