La Crosse Technology 513-1311OTN Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor La Crosse Technology 513-1311OTN (6 pagina's) in de categorie Klok. Deze handleiding was nuttig voor 7 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6
ATOMIC DIGITAL WALL CLOCK
Model: 513-1311OTN
DC: 102618
POWER UP
1. Insert 2 new “AAA batteries into the outdoor sensor. Observe correct polarity. The red LED will flash
when transmitting.
2. Insert 3 new “C” batteries (not included) into the clock. Observe the correct polarity.
3 After 5 minutes place sensor outside in a shaded location.
WWVB ATOMIC TIME
Page | 2
AAA
AAA
D1: Transmission Indication LED
D2: Outdoor Temperature
D3: Battery Compartment
D4: Wall Mount Hole
D5: “RESET” button
D6: °C/°F” button
D7: Stand
IMPORTANT: When the clock is searching for the WWVB Atomic Time signal, the buttons will not work.
To use the buttons simply hold the button to stop the clock from searching. Buttons will now - °C/°F
work.
• Hold the - °C/°F button to start or stop a manual search for the WWVB Atomic Time signal.
• WWVB Tower Icon will flash when searching.
For information about WWVB Atomic Time visit: http://bit.ly/AtomicTime
SETTINGS
• Hold the MODE/SET button to enter the setting mode.
• Press the + or – buttons to adjust a value.
• Press the MODE/SET button to confirm adjustment and move to the next item.
Setting order:
1. Hour
2. Minutes
3. Seconds
4. Year
5. Month/Date format (M/D or D/M)
6. Month
7. Date
8. DST indicator
Note: Weekday will set automatically when Year. Month and Date are set.
Note: The clock will default back to time display if no buttons are pressed for 30 seconds.
FAHRENHEIT | CELSIUS TEMPERATURE DISPLAY
12/24 HOUR & TIME ZONE SELECTION
• Press the + 12/24 button to select 12 hour or 24 hour time format. Default is 12 hour time.
• Hold the +12/24 button to select the time zone.
• Time zones:
PacificP
M Mountain
C E Central
E Eastern
• Press the - °C/°F button to change the temperature display from Fahrenheit to Celsius.
Page | 3
TIME ALARM
1. Press the MODE/SET button to view alarm time. The letters AL will replace the seconds.
2. Hold the MODE/SET button and the Hour will flash.
3. Use the + or - buttons to adjust the hour.
4. Press the MODE/SET button to confirm and move to the minutes. Minutes will flash.
5. Use the + or - buttons to adjust the minutes. Press the MODE/SET button to confirm and exit.


Product specificaties

Merk: La Crosse Technology
Categorie: Klok
Model: 513-1311OTN

Heb je hulp nodig?

Als je hulp nodig hebt met La Crosse Technology 513-1311OTN stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Klok La Crosse Technology

Handleiding Klok

Nieuwste handleidingen voor Klok